Overlay Accuracy Limitations of Soft Stamp UV Nanoimprint Lithography and Circumvention Strategies for Device Applications

In this work multilevel pattering capabilities of Substrate Conformal Imprint Lithography (SCIL) have been explored. A mix & match approach combining the high throughput of nanoimprint lithography with the excellent overlay accuracy of electron beam lithography (EBL) has been exploited to fabricate nanoscale devices. An EBL system has also been utilized as a benchmarking tool to measure both stamp distortions and alignment precision of this mix & match approach. By aligning the EBL system to 20 mm x 20 mm and 8 mm x 8 mm cells to compensate pattern distortions of order of $3 \mu m$ over 6 inch wafer area, overlay accuracy better than $1.2 \mu m$ has been demonstrated. This result can partially be attributed to the flexible SCIL stamp which compensates deformations caused by the presence of particles which would otherwise significantly reduce the alignment precision

Salmonella-associated Deaths, Sweden, 1997–2003

We examined excess deaths after infection with Salmonella in a registry-based matched cohort study of 25,060 persons infected abroad and 5,139 infected within Sweden. The domestically infected have an increased standardized mortality ratio, whereas those who acquired Salmonella infection abroad had no excess risk of death

Capillary Assembly of Anisotropic Particles at Cylindrical Fluid-Fluid Interfaces

The unique behavior of colloids at liquid interfaces provides exciting opportunities for engineering the assembly of colloidal particles into functional materials. The deformable nature of fluid-fluid interfaces means that we can use the interfacial curvature, in addition to particle properties, to direct self-assembly. To this end, we use a finite element method (Surface Evolver) to study the self-assembly of rod-shaped particles adsorbed at a simple curved fluid-fluid interface formed by a sessile liquid drop with cylindrical geometry. Specifically, we study the self-assembly of single and multiple rods as a function of drop curvature and particle properties such as shape (ellipsoid, cylinder, and spherocylinder), contact angle, aspect ratio, and chemical heterogeneity (homogeneous and triblock patchy). We find that the curved interface allows us to effectively control the orientation of the rods, allowing us to achieve parallel, perpendicular, or novel obliquely orientations with respect to the cylindrical drop. In addition, by tuning particle properties to achieve parallel alignment of the rods, we show that the cylindrical drop geometry favors tip-to-tip assembly of the rods, not just for cylinders, but also for ellipsoids and triblock patchy rods. Finally, for triblock patchy rods with larger contact line undulations, we can achieve strong spatial confinement of the rods transverse to the cylindrical drop due to the capillary repulsion between the contact line undulations of the particle and the pinned contact lines of the sessile drop. Our capillary assembly method allows us to manipulate the configuration of single and multiple rod-like particles and therefore offers a facile strategy for organizing such particles into useful functional materials

Infection-related hospitalizations in breast cancer patients: risk and impact on prognosis

OBJECTIVES: Infections are a common cause of hospitalization in breast cancer patients. We studied the risk, clinical characteristics and outcomes of infection-related hospitalizations in this patient population. METHODS: A Swedish registry-based study including 8338 breast cancer patients diagnosed between 2001 and 2008, followed prospectively for infection-related hospitalizations until 2010. Standardized incidence ratios (SIRs) were calculated using background rates from the general female population. Associations with clinical characteristics and mortality were analyzed using flexible parametric survival models. RESULTS: In total, 720 patients experienced an infection-related hospitalization during a median follow-up of 4.9 years. Infection rates were highest within the first year of diagnosis (SIR = 5.61, 95% CI; 4.98-6.32), and site-specific risks were most pronounced for sepsis (SIR = 3.14, 95% CI; 2.66-3.71) and skin infections (SIR = 2.80, 95% CI; 2.24-3.50). Older age at diagnosis, comorbidities, markers of tumor aggressiveness, chemotherapy and axillary node dissection were independent predictors of infectious disease risk. Infection-related hospitalizations were also independently associated with overall and breast cancer-specific death. CONCLUSIONS: A significant number of breast cancer patients are hospitalized with an infection following diagnosis, which in turn predicts poor prognosis. The risk profile of infection-related hospitalizations is multifactorial, including patient, tumor and treatment-related factors.Swedish Research CouncilFORTEAccepte

Mortality following Campylobacter infection: a registry-based linkage study

BACKGROUND: Campylobacteriosis is one of the most commonly identified causes of bacterial diarrheal disease and a common cause of gastroenteritis in travellers from developed nations. Despite the widespread occurrence, there is little information on Campylobacter mortality. METHODS: Mortality among a cohort of Campylobacter cases were compared with the general population 0–1, 1–3, 3–12 and more than 12 month after the onset of the illness. The cases were sub-grouped according to if they had been infected domestically or abroad. RESULTS: The standardized mortality ratio for cases infected domestically was 2.9 (95% CI: 1.9–4.0) within the first month following the illness. The risk then gradually diminished and approached 1.0 after one year or more have passed since the illness. This initial excess risk was not attributable to any particular age group (such as the oldest). In contrast, for those infected abroad, a lower standardized mortality ratio 0.3 (95% CI: 0.04–0.8) was shown for the first month after diagnosis compared to what would be expected in the general population. CONCLUSION: Infection with Campylobacter is associated with an increased short-term risk of death among those who were infected domestically. On the contrary, for those infected abroad a lower than expected risk of death was evident. We suggest that the explanation behind this is a "healthy traveler effect" among imported cases, and effects of a more frail than average population among domestic cases

Holocene changes in vegetation composition in northern Europe: why quantitative pollen-based vegetation reconstructions matter

International audienceWe present pollen-based reconstructions of the spatio-temporal dynamics of northern European regional vegetation abundance through the Holocene. We apply the Regional Estimates of VEgetation Abundance from Large Sites (REVEALS) model using fossil pollen records from eighteen sites within five modern biomes in the region. The eighteen sites are classified into four time-trajectory types on the basis of principal components analysis of both the REVEALS-based vegetation estimates (RVs) and the pollen percentage (PPs). The four trajectory types are more clearly separated for RVs than PPs. Further, the timing of major Holocene shifts, rates of compositional change, and diversity indices (turnover and evenness) differ between RVs and PPs. The differences are due to the reduction by REVEALS of biases in fossil pollen assemblages caused by different basin size, and inter-taxonomic differences in pollen productivity and dispersal properties. For example, in comparison to the PPs, the RVs show an earlier increase in Corylus and Ulmus in the early-Holocene and a more pronounced increase in grassland and deforested areas since the mid-Holocene. The results suggest that the influence of deforestation and agricultural activities on plant composition and abundance from Neolithic times was stronger than previously inferred from PPs. Relative to PPs, RVs show a more rapid compositional change, a largest decrease in turnover, and less variable evenness in most of northern Europe since 5200 cal yr BP. All these changes are primarily related to the strong impact of human activities on the vegetation. This study demonstrates that RV-based estimates of diversity indices, timing of shifts, and rates of change in reconstructed vegetation provide new insights into the timing and magnitude of major humandisturbance on Holocene regional vegetation, features that are critical in the assessment of humanimpact on vegetation, land-cover, biodiversity, and climate in the past

Reflective arrayed waveguide gratings based on Sagnac loop reflectors with custom spectral response

© 2014 Optical Society of America. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibitedIn this paper, a model for the analysis and design of a reflective Arrayed Waveguide Grating is presented. The device consists of one half of a regular AWG where each arm waveguide in the array is terminated with a phase shifter and a Sagnac loop reflector. By individually adjusting the phase shifter and Sagnac reflectivity in each arm, additional functionality to that previously reported in the literature is attained, since this enables tailoring the spectral response of the AWG. The design and experimental demonstration of Gaussian pass-band shape devices in Silicon-on-Insulator technology are reported. Methods to obtain flattened and arbitrary spectral responses are described and supported by simulation results. (C) 2014 Optical Society of AmericaThe authors acknowledge financial support by the Spanish MINECO projects TEC2010-21337, TEC2013-42332-P; FEDER UPVOV 10-3E-492 and UPVOV 08-3E-008. B. Gargallo acknowledges financial support through FPI grant BES-2011-046100. The authors thank J.S. Fandino for helpful discussions.Gargallo Jaquotot, BA.; Muñoz Muñoz, P.; Baños López, R.; Giesecke, AL.; Bolten, J.; Wahlbrink, T.; Kleinjans, H. (2014). Reflective arrayed waveguide gratings based on Sagnac loop reflectors with custom spectral response. Optics Express. 22(12):14348-14362. https://doi.org/10.1364/OE.22.014348S14348143622212Brackett, C. A. (1990). Dense wavelength division multiplexing networks: principles and applications. IEEE Journal on Selected Areas in Communications, 8(6), 948-964. doi:10.1109/49.57798Kirchain, R., & Kimerling, L. (2007). A roadmap for nanophotonics. Nature Photonics, 1(6), 303-305. doi:10.1038/nphoton.2007.84Pennings, E., Khoe, G.-D., Smit, M. K., & Staring, T. (1996). Integrated-optic versus microoptic devices for fiber-optic telecommunication systems: a comparison. IEEE Journal of Selected Topics in Quantum Electronics, 2(2), 151-164. doi:10.1109/2944.577349Smit, M. K., & Van Dam, C. (1996). PHASAR-based WDM-devices: Principles, design and applications. IEEE Journal of Selected Topics in Quantum Electronics, 2(2), 236-250. doi:10.1109/2944.577370Dragone, C., Edwards, C. A., & Kistler, R. C. (1991). Integrated optics N*N multiplexer on silicon. IEEE Photonics Technology Letters, 3(10), 896-899. doi:10.1109/68.93254Lycett, R. J., Gallagher, D. F. G., & Brulis, V. J. (2013). Perfect Chirped Echelle Grating Wavelength Multiplexor: Design and Optimization. IEEE Photonics Journal, 5(2), 2400123-2400123. doi:10.1109/jphot.2013.2251874Ryckeboer, E., Gassenq, A., Muneeb, M., Hattasan, N., Pathak, S., Cerutti, L., … Roelkens, G. (2013). Silicon-on-insulator spectrometers with integrated GaInAsSb photodiodes for wide-band spectroscopy from 1510 to 2300 nm. Optics Express, 21(5), 6101. doi:10.1364/oe.21.006101Pruessner, M. W., Stievater, T. H., & Rabinovich, W. S. (2007). Integrated waveguide Fabry-Perot microcavities with silicon/air Bragg mirrors. Optics Letters, 32(5), 533. doi:10.1364/ol.32.000533De Peralta, L. G., Bernussi, A. A., Frisbie, S., Gale, R., & Temkin, H. (2003). Reflective arrayed waveguide grating multiplexer. IEEE Photonics Technology Letters, 15(10), 1398-1400. doi:10.1109/lpt.2003.818223Inoue, Y., Himeno, A., Moriwaki, K., & Kawachi, M. (1995). Silica-based arrayed-waveguide grating circuit as optical splitter/router. Electronics Letters, 31(9), 726. doi:10.1049/el:19950497Soole, J. B. D., Amersfoort, M. R., LeBlanc, H. P., Rajhel, A., Caneau, C., Youtsey, C., & Adesida, I. (1996). Compact polarisation independent InP reflective arrayed waveguide grating filter. Electronics Letters, 32(19), 1769. doi:10.1049/el:19961212Dai, D., Fu, X., Shi, Y., & He, S. (2010). Experimental demonstration of an ultracompact Si-nanowire-based reflective arrayed-waveguide grating (de)multiplexer with photonic crystal reflectors. Optics Letters, 35(15), 2594. doi:10.1364/ol.35.002594Tsai, J.-C., Huang, S., Hah, D., Toshiyoshi, H., & Wu, M. C. (2004). Open-Loop Operation of MEMS-Based<tex>$1,times N$</tex>Wavelength-Selective Switch With Long-Term Stability and Repeatability. IEEE Photonics Technology Letters, 16(4), 1041-1043. doi:10.1109/lpt.2004.824652Okamoto, K., & Ishida, K. (2013). Fabrication of silicon reflection-type arrayed-waveguide gratings with distributed Bragg reflectors. Optics Letters, 38(18), 3530. doi:10.1364/ol.38.003530Okamoto, K., & Yamada, H. (1995). Arrayed-waveguide grating multiplexer with flat spectral response. Optics Letters, 20(1), 43. doi:10.1364/ol.20.000043Doerr, C. R., Zhang, L., & Winzer, P. J. (2011). Monolithic InP Multiwavelength Coherent Receiver Using a Chirped Arrayed Waveguide Grating. Journal of Lightwave Technology, 29(4), 536-541. doi:10.1109/jlt.2010.2097240Munoz, P., Pastor, D., & Capmany, J. (2002). Modeling and design of arrayed waveguide gratings. Journal of Lightwave Technology, 20(4), 661-674. doi:10.1109/50.996587Jinguji, K., Takato, N., Hida, Y., Kitoh, T., & Kawachi, M. (1996). Two-port optical wavelength circuits composed of cascaded Mach-Zehnder interferometers with point-symmetrical configurations. Journal of Lightwave Technology, 14(10), 2301-2310. doi:10.1109/50.541222Soldano, L. B., & Pennings, E. C. M. (1995). Optical multi-mode interference devices based on self-imaging: principles and applications. Journal of Lightwave Technology, 13(4), 615-627. doi:10.1109/50.372474Bachmann, M., Besse, P. A., & Melchior, H. (1994). General self-imaging properties in N × N multimode interference couplers including phase relations. Applied Optics, 33(18), 3905. doi:10.1364/ao.33.003905Besse, P. A., Gini, E., Bachmann, M., & Melchior, H. (1996). New 2×2 and 1×3 multimode interference couplers with free selection of power splitting ratios. Journal of Lightwave Technology, 14(10), 2286-2293. doi:10.1109/50.541220Leuthold, J., & Joyner, C. W. (2001). Multimode interference couplers with tunable power splitting ratios. Journal of Lightwave Technology, 19(5), 700-707. doi:10.1109/50.923483Seok-Hwan Jeong, & Morito, K. (2010). Novel Optical 90$^{\circ}$ Hybrid Consisting of a Paired Interference Based 2$\,\times\,$4 MMI Coupler, a Phase Shifter and a 2$\,\times\,$2 MMI Coupler. Journal of Lightwave Technology, 28(9), 1323-1331. doi:10.1109/jlt.2010.2042278Talahashi, H., Oda, K., Toba, H., & Inoue, Y. (1995). Transmission characteristics of arrayed waveguide N×N wavelength multiplexer. Journal of Lightwave Technology, 13(3), 447-455. doi:10.1109/50.372441Munoz, P., Pastor, D., Capmany, J., Ortega, D., Pujol, A., & Bonar, J. R. (2004). AWG Model Validation Through Measurement of Fabricated Devices. Journal of Lightwave Technology, 22(12), 2763-2777. doi:10.1109/jlt.2004.833275Kleijn, E., Smit, M. K., & Leijtens, X. J. M. (2013). New Analytical Arrayed Waveguide Grating Model. Journal of Lightwave Technology, 31(20), 3309-3314. doi:10.1109/jlt.2013.2281612Bogaerts, W., Dumon, P., Thourhout, D. V., Taillaert, D., Jaenen, P., Wouters, J., … Baets, R. G. (2006). Compact Wavelength-Selective Functions in Silicon-on-Insulator Photonic Wires. IEEE Journal of Selected Topics in Quantum Electronics, 12(6), 1394-1401. doi:10.1109/jstqe.2006.884088Pathak, S., Van Thourhout, D., & Bogaerts, W. (2013). Design trade-offs for silicon-on-insulator-based AWGs for (de)multiplexer applications. Optics Letters, 38(16), 2961. doi:10.1364/ol.38.002961Van Laere, F., Claes, T., Schrauwen, J., Scheerlinck, S., Bogaerts, W., Taillaert, D., … Baets, R. (2007). Compact Focusing Grating Couplers for Silicon-on-Insulator Integrated Circuits. IEEE Photonics Technology Letters, 19(23), 1919-1921. doi:10.1109/lpt.2007.908762Henschel, W., Georgiev, Y. M., & Kurz, H. (2003). Study of a high contrast process for hydrogen silsesquioxane as a negative tone electron beam resist. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 21(5), 2018. doi:10.1116/1.1603284LEMME, M. (2004). Highly selective HBr etch process for fabrication of Triple-Gate nano-scale SOI-MOSFETs. Microelectronic Engineering, 73-74, 346-350. doi:10.1016/s0167-9317(04)00123-6Bolten, J., Wahlbrink, T., Koo, N., Kurz, H., Stammberger, S., Hofmann, U., & Ünal, N. (2010). Improved CD control and line edge roughness in E-beam lithography through combining proximity effect correction with gray scale techniques. Microelectronic Engineering, 87(5-8), 1041-1043. doi:10.1016/j.mee.2009.11.097Sakai, A., Fukazawa, T., & Baba, T. (2004). Estimation of Polarization Crosstalk at a Micro-Bend in Si-Photonic Wire Waveguide. Journal of Lightwave Technology, 22(2), 520-525. doi:10.1109/jlt.2004.824357Kleijn, E., Williams, P. J., Whitbread, N. D., Wale, M. J., Smit, M. K., & Leijtens, X. J. M. (2012). Sidelobes in the response of arrayed waveguide gratings caused by polarization rotation. Optics Express, 20(20), 22660. doi:10.1364/oe.20.022660Pathak, S., Vanslembrouck, M., Dumon, P., Van Thourhout, D., Verheyen, P., Lepage, G., … Bogaerts, W. (2014). Effect of Mask Discretization on Performance of Silicon Arrayed Waveguide Gratings. IEEE Photonics Technology Letters, 26(7), 718-721. doi:10.1109/lpt.2014.2303793Okamoto, K., & Sugita, A. (1996). Flat spectral response arrayed-waveguide grating multiplexer with parabolic waveguide horns. Electronics Letters, 32(18), 1661. doi:10.1049/el:19961108Munoz, P., Pastor, D., & Capmany, J. (2001). Analysis and design of arrayed waveguide gratings with MMI couplers. Optics Express, 9(7), 328. doi:10.1364/oe.9.000328Doerr, C. R., Cappuzzo, M. A., Chen, E. Y., Wong-Foy, A., Gomez, L. T., & Buhl, L. L. (2006). Wideband Arrayed Waveguide Grating With Three Low-Loss Maxima Per Passband. IEEE Photonics Technology Letters, 18(21), 2308-2310. doi:10.1109/lpt.2006.885208Leaird, D. E., Weiner, A. M., Kamei, S., Ishii, M., Sugita, A., & Okamoto, K. (2002). Generation of flat-topped 500-GHz pulse bursts using loss engineered arrayed waveguide gratings. IEEE Photonics Technology Letters, 14(6), 816-818. doi:10.1109/lpt.2002.100310

Patterns in recent and Holocene pollen accumulation rates across Europe - the Pollen Monitoring Programme Database as a tool for vegetation reconstruction

The collection of modern, spatially extensive pollen data is important for the interpretation of fossil pollen assemblages and the reconstruction of past vegetation communities in space and time. Modern datasets are readily available for percentage data but lacking for pollen accumulation rates (PARs). Filling this gap has been the motivation of the pollen monitoring network, whose contributors monitored pollen deposition in modified Tauber traps for several years or decades across Europe. Here we present this monitoring dataset consisting of 351 trap locations with a total of 2742 annual samples covering the period from 1981 to 2017. This dataset shows that total PAR is influenced by forest cover and climate parameters, which determine pollen productivity and correlate with latitude. Treeless vegetation produced PAR values of at least 140 grains cm−2 yr−1. Tree PAR increased by at least 400 grains cm−2 yr−1 with each 10 % increase in forest cover. Pollen traps situated beyond 200 km of the distribution of a given tree species still collect occasional pollen grains of that species. The threshold of this long-distance transport differs for individual species and is generally below 60 grains cm−2 yr−1. Comparisons between modern and fossil PAR from the same regions show similar values. For temperate taxa, modern analogues for fossil PARs are generally found downslope or southward of the fossil sites. While we do not find modern situations comparable to fossil PAR values of some taxa (e.g. Corylus), CO2 fertilization and land use may cause high modern PARs that are not documented in the fossil record. The modern data are now publicly available in the Neotoma Paleoecology Database and aid interpretations of fossil PAR data.publishedVersio

Creating spatially continuous maps of past land cover from point estimates: A new statistical approach applied to pollen data

International audienceReliable estimates of past land cover are critical for assessing potential effects of anthropogenic land-cover changes on past earth surface-climate feedbacks and landscape complexity. Fossil pollen records from lakes and bogs have provided important information on past natural and human-induced vegetation cover. However, those records provide only point estimates of past land cover, and not the spatially continuous maps at regional and sub-continental scales needed for climate modelling. We propose a set of statistical models that create spatially continuous maps of past land cover by combining two data sets: 1) pollen-based point estimates of past land cover (from the REVEALS model) and 2) spatially continuous estimates of past land cover, obtained by combining simulated potential vegetation (from LPJ-GUESS) with an anthropogenic land-cover change scenario (KK10). The proposed models rely on statistical methodology for compositional data and use Gaussian Markov Random Fields to model spatial dependencies in the data. Land-cover reconstructions are presented for three time windows in Europe: 0.05, 0.2, and 6 ka years before present (BP). The models are evaluated through cross-validation, deviance information criteria and by comparing the reconstruction of the 0.05 ka time window to the present-day land-cover data compiled by the European Forest Institute (EFI). For 0.05 ka, the proposed models provide reconstructions that are closer to the EFI data than either the REVEALS-or LPJ-GUESS/KK10-based estimates; thus the statistical combination of the two estimates improves the reconstruction. The reconstruction by the proposed models for 0.2 ka is also good. For 6 ka, however, the large differences between the REVEALS-and LPJ-GUESS/KK10-based estimates reduce the reliability of the proposed models. Possible reasons for the increased differences between REVEALS and LPJ-GUESS/KK10 for older time periods and further improvement of the proposed models are discussed

Fire hazard modulation by long-term dynamics in land cover and dominant forest type in eastern and central Europe

Wildfire occurrence is influenced by climate, vegetation and human activities. A key challenge for understanding the risk of fires is quantifying the mediating effect of vegetation on fire regimes. Here, we explore the relative importance of Holocene land cover, land use, dominant functional forest type, and climate dynamics on biomass burning in temperate and boreo-nemoral regions of central and eastern Europe over the past 12 kyr. We used an extensive data set of Holocene pollen and sedimentary charcoal records, in combination with climate simulations and statistical modelling. Biomass burning was highest during the early Holocene and lowest during the mid-Holocene in all three ecoregions (Atlantic, continental and boreo-nemoral) but was more spatially variable over the past 3–4 kyr. Although climate explained a significant variance in biomass burning during the early Holocene, tree cover was consistently the highest predictor of past biomass burning over the past 8 kyr. In temperate forests, biomass burning was high at ~ 45% tree cover and decreased to a minimum at between 60% and 70% tree cover. In needleleaf-dominated forests, biomass burning was highest at ~60 %–65%tree cover and steeply declined at > 65% tree cover. Biomass burning also increased when arable lands and grasslands reached ~15 %–20 %, although this relationship was variable depending on land use practice via ignition sources, fuel type and quantities. Higher tree cover reduced the amount of solar radiation reaching the forest floor and could provide moister, more wind-protected microclimates underneath canopies, thereby decreasing fuel flammability. Tree cover at which biomass burning increased appears to be driven by warmer and drier summer conditions during the early Holocene and by increasing human influence on land cover during the late Holocene. We suggest that longterm fire hazard may be effectively reduced through land cover management, given that land cover has controlled fire regimes under the dynamic climates of the Holocene