2,231 research outputs found

    ITERL: A Wireless Adaptive System for Efficient Road Lighting

    Get PDF
    This work presents the development and construction of an adaptive street lighting system that improves safety at intersections, which is the result of applying low-power Internet of Things (IoT) techniques to intelligent transportation systems. A set of wireless sensor nodes using the Institute of Electrical and Electronics Engineers (IEEE) 802.15.4 standard with additional internet protocol (IP) connectivity measures both ambient conditions and vehicle transit. These measurements are sent to a coordinator node that collects and passes them to a local controller, which then makes decisions leading to the streetlight being turned on and its illumination level controlled. Streetlights are autonomous, powered by photovoltaic energy, and wirelessly connected, achieving a high degree of energy efficiency. Relevant data are also sent to the highway conservation center, allowing it to maintain up-to-date information for the system, enabling preventive maintenance.Consejería de Fomento y Vivienda Junta de Andalucía G-GI3002 / IDIOFondo Europeo de Desarrollo Regional G-GI3002 / IDI

    Teleological structure of scientific and mathematical education

    Get PDF
    One of the main educational objectives in the current Spanish curricula is to develop mathematical and scientific competences, understood as the set of skills and abilities needed to apply Mathematics and Science in situations where are required. This is therefore closely related, on one hand, to the functionality of the knowledge, in the sense of its usefulness in problem solving and in mathematical and science modeling problems. And, on the other hand, is related to the understanding of disciplinary knowledge, a cognitive phenomenon that enables and gives competence to the individual to elaborate contextualized and accurate answers. These answers involve the use of mathematical and scientific knowledge in some of the categories of their phenomenological and epistemological dimensions. For this reason, in this work we carry out a theoretical and reflexive analysis that tries to determine which aspects of the Mathematics and Science Education should be promoted in order to optimize the formative dimension of an individual in these disciplines. This dimension, frequently forgotten in learning and teaching processes, turns out to be, in conjunction with the functional and instrumental dimensions, necessary to acquire the appropriate knowledge in Mathematics and Science that will enable future citizens to permanently adapt to the environment and eventually transform it positively. The results of the analysis show the components of this dimension that should be prioritized in the Science and Mathematics Education: the intellectual autonomy, understood as the ability to think for ourselves and to put in use our abilities and skills to generate information to solve real life problems and to make the right decisions; the moral autonomy, defined as the capacity to face with real life problems with ethical implications; and the social autonomy, understood as the aptitude to make decisions using social abilities and skills.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.“Criterios e instrumentos de evaluación de unidades de enseñanza y aprendizaje” (PPIT.UMA.B1.2017/16) financiado por la Universidad de Málaga en la convocatoria de 2017-2018

    Producción ajustada y recursos humanos: resultados sobre la efectividad empresarial

    Get PDF
    Nuestro artículo permite comprobar las prácticas de recursos humanos (RRHH) que están asociadas a la implantación de la producción ajustada (PA) y la efectividad organizacional que se obtiene de la combinación de ambas. Incidiendo en este sentido, las empresas con un grado mayor de implantación de la PA se preocupan de formar a una cantidad superior de empleados en estas prácticas así como de desarrollar más ampliamente los procesos de promoción interna. Sin embargo, no sucede lo mismo con la remuneración variable que no se ve afectada por la introducción de la PA. Por otro lado, la combinación de PA y de algunas prácticas de RRHH ha demostrado que reduce el tiempo de fabricación, los niveles de inventario y el tamaño de lote económico, y aumenta los indicadores de productividad y productividad y calidad conjuntamente. Con esta investigación, extendemos el trabajo de otros autores centrándonos en un sector apenas estudiado. Nuestra muestra consiste en un conjunto de empresas bastante homogéneas, lo que permite examinar la relación entre nuestras variables al tiempo que mantenemos controladas otras. Estos resultados pueden ayudar a los responsables de los departamentos de recursos humanos y de producción a potenciar sus logros organizativos. This paper indicates the Human Resource Management (HRM) practices associated with the introduction of Lean Production (LP) and the organizational results obtained. Companies that make the most of LP practices are also those that take care to train workers in using these practices as well as improving their internal promotion. However, the same is not true for the pay for performance system. The combination of LP with some HRM practices reduce lead time, inventory and economic order quantity, and boosts productivity separately and jointly with quality. We extend the work of other researchers by focusing on a sector that has been very little studied to date. The sample consists of a set of plants that are fairly homogeneous, which facilitates the analysis of the relationships between the selected variables while keeping other variables controlled. These results can thus be used to help human resource and production departments in improving organizational performance

    Grado de uso y resultados de la producción ajustada en las empresas de pavimentos y revestimientos cerámicos

    Get PDF
    Este artículo presenta una investigación llevada a cabo en el sector cerámico español. Su objetivo radica en determinar el grado de uso de algunas de las prácticas más representativas de la producción ajustada (PA) y su efecto sobre los niveles de calidad y productividad de estas empresas. Se presentan los resultados de 76 plantas industriales (un 79,17% de la población total) dedicadas a la monococción: porosa, gres y gres porcelánico. La conclusión más destacada es que, contrariamente a lo esperado, apenas se utiliza la PA por parte de estas empresas, sin que ello sea obstáculo para que las plantas alcancen unos altos índices de calidad y productividad. Este trabajo se va a unir a otros que señalan que la PA no es un sistema universal, válido en cualquier circunstancia y para cualquier lugar. Por tanto, antes de descartar los sistemas de producción en masa por otros más innovadores (desde el supuesto punto de vista de su eficiencia productiva), se requiere un análisis más detallado, al menos, de las características propias de cada sector. This article presents research carried out in the Spanish ceramic tile industry. The aim focuses on determining the degree of use of some of the most representative Lean manufacturing practices and their effect on the productivity and quality levels of these companies. Results are presented from 76 plants (79.17% of the population) dedicated to single firing ceramics: porous tiles, stoneware floor tiles and porcelain stoneware. The most outstanding conclusion was that, contrary to what was expected, Lean manufacturing is hardly used at all by these companies. However, the plants achieve high rates of quality and productivity. This work falls into line with others that indicate that Lean manufacturing is not a universal system, valid in any circumstances and place. Therefore, before getting rid of mass production systems in favour of more innovative ones (from the point of view of their productive efficiency), a more detailed analysis is required, at least, of the characteristics of each industry

    El efecto del tipo de producto fabricado y del tamaño de la empresa en los resultados productivos de las empresas de pavimentos y revestimientos cerámicos de la Comunidad Valenciana.

    Get PDF
    En este artículo, describimos los datos recogidos en las entrevistas realizadas a 101 directores de producción y en las visitas posteriores a sus plantas. En él, presentamos la importancia que tiene el tipo de producto fabricado y el número de trabajadores en plantilla, para explicar las diferencias que existen en los resultados productivos de las empresas. Algunos indicadores como el plazo de fabricación, la cantidad de inventario de producto terminado o la productividad por operario, son sensiblemente diferentes en las distintas agrupaciones de empresas. Sin embargo, la satisfacción percibida por el mando de producción apenas varía al agrupar las empresas por producto fabricado

    Integrating human resource management into lean production and their impact on organizational performance

    Get PDF
    Purpose: Firstly, to analyse the effects of lean production (LP) on the policy of human resource management (HRM). The second goal of this research is to determine whether or not implementation of HRM practices associated with LP explain the differences in organizational performance between manufacturing plants. Design/methodology/approach: We developed a questionnaire for data collection. Findings are presented from 76 establishments (79.17% of the total sample) that specialise in single-firing ceramic tiles in Spain. Findings: Companies that make the most of LP practices are also those that take care to train workers in using these practices as well as improving their employment security. However, the same is not true for the pay for performance system. The combination of LP with HRM practices reduces inventory and boosts productivity but does not appear to affect the other performance variables analysed. Research limitations/implications: For certain variables we found very little variation between the plants in our samples. The data are cross-sectional, so causality cannot be definitively determined. Practical implications: This paper indicates the HRM practices associated with the LP and the results obtained. It can thus be used to help human resource and production departments in improving organizational performance. Originality/value: We extend the work of other researchers by focusing on a sector and a country that have been very little studied to date. The sample consists of a set of plants that are fairly homogeneous, which facilitates the analysis of the relationships between the selected variables while keeping other variables controlled

    Genome-wide transcriptome response of Streptomyces tsukubaensis to N-acetylglucosamine: effect on tacrolimus biosynthesis

    Get PDF
    [EN] Chitin is the second most abundant carbohydrate biopolymer present in soils and is utilized by antibiotic–producing Streptomyces species. Its monomer, N-acetylglucosamine (GlcNAc), regulates the developmental program of the model organism Streptomyces coelicolor. GlcNAc blocks differentiation when growing on rich medium whilst it promotes development on poor culture media. However, it is unclear if the same GlcNAc regulatory profile observed in S. coelicolor applies also to other industrially important Streptomyces species. We report here the negative effect of GlcNAc on differentiation and tacrolimus (FK506) production by Streptomyces tsukubaensis NRRL 18488. Using microarrays technology, we found that GlcNAc represses the transcription of fkbN, encoding the main transcriptional activator of the tacrolimus biosynthetic cluster, and of ppt1, encoding a phosphopantheteinyltransferase involved in tacrolimus biosynthesis. On the contrary, GlcNAc stimulated transcription of genes related to amino acid and nucleotide biosynthesis, DNA replication, RNA translation, glycolysis and pyruvate metabolism. The results obtained support those previously reported for S. coelicolor, but some important differences were observed; for example genes involved in GlcNAc transport and metabolism and genes encoding transcriptional regulators such as crr, ptsI, nagE1, nagE2, nagB, chiA, chiJ, ngcE, dasR or atrA are not significantly induced in S. tsukubaensis by GlcNAc addition. Differences in the GlcNAc transport systems, in the physiology of S. tsukubaensis and S. coelicolor and/or the different composition of the culture media used are likely to be responsible for the discrepancies observed between these specieSIThis work was supported by the European Union through an ERA-IB (PIM2010EEI-00677) international cooperation project. M. Ordóñez-Robles received a FPU fellowship of the Ministry of Education (grant number AP2009-4508). We acknowledge Prof. Paloma Liras for helpful scientific discussion and the technical support of B. Martín, J. Merino and A. Casenave (INBIOTEC)

    Anisotropic thermal magnetoresistance for an active control of radiative heat transfer

    Full text link
    We predict a huge anisotropic thermal magnetoresistance (ATMR) in the near-field radiative heat transfer between magneto-optical particles when the direction of an external magnetic field is changed with respect to the heat current direction. We illustrate this effect with the case of two InSb spherical particles where we find that the ATMR amplitude can reach values of up to 800% for a magnetic field of 5 T, which is many orders of magnitude larger than its spintronic analogue in electronic devices. This thermomagnetic effect could find broad applications in the fields of ultrafast thermal management as well as magnetic and thermal remote sensing.Comment: 6 pages, 4 figure

    Factores anatómicos y químicos del xilema de Ulmus minor Mill. relacionados con la resistencia a Ophiostoma novo-ulmi Brasier

    Full text link
    Las poblaciones de Ulmus minor europeas se encuentran seriamente amenazadas por la grafiosis, la enfermedad más devastadora y difundida de los olmos. Ophiostoma novo-ulmi se desarrolla en el interior de los vasos del xilema cusando su cavitación. Este proceso origina marchitamiento foliar y, en la casi totalidad de los casos, la muerte del árbol. En el presente trabajo, se ha estudiado en U. minor la variación de la susceptibilidad con la edad y su posible relación con la variación de las características anatómicas del xilema, y se ha comparado la formación estacional del xilema en U. minor con la de una especie tolerante a la grafiosis, U. pumila. Asimismo, se ha aplicado espectroscopia de infrarrojo de transformada de Fourier (FT-IR), junto con técnicas de análisis multivariante, para analizar cambios metabólicos en tejidos de xilema de U. minor infectados con O. novo-ulmi, y para comparar perfiles metabólicos de olmos de diferente grado de resistencia. Los resultados mostraron resistencia juvenil en olmos de dos y tres savias. Se observó una relación significativa entre la variación de la susceptibilidad con la edad y la variación de determinados factores anatómicos. Un menor diámetro medio de los vasos, una menor conductancia hidráulica teórica, y una menor proporción de vasos de grandes dimensiones en la madera temprana se asociaron con mayores niveles de resistencia. Se piensa que estos factores contribuyen a una menor expansión del patógeno por el sistema vascular y a una mayor facilidad para la compartimentación de la enfermedad. U.minor formó vasos de mayores diámetros que U. pumila al comienzo del periodo vegetativo, pero a partir del 15 de junio los diámetros de los vasos fueron mayores en U. pumila. Tras la inoculación de U. minor con O. novo-ulmi, se produjo una reducción en los niveles de polisacáridos del xilema y un aumento en los niveles de compuestos fenólicos. Se observó la formación de barreras de compartimentación de la enfermedad, formadas por células de parénquima axial suberizadas. A los 15 días tras la inoculación, individuos de U.minor resistentes presentaron mayores niveles de almidón que individuos susceptibles. Se diferenciaron químicamente tejidos sanos del xilema de U. minor y U. pumila, así como de individuos resistentes y susceptibles de U. minor. Nuevamente, contenidos elevados de almidón se asociaron con niveles elevados de resistencia, lo cual puede estar relacionado con una mayor capacidad energética del árbol para activar los mecanismos de defensa. No obstante, otros componentes químicos, tales como los niveles de celulosa, lignina y pectina, también contribuyeron a la distinción entre grupos de susceptibilidad. Los resultados confirman que la resistencia de los olmos a la grafiosis es de carácter poligénico, actuando factores de resistencia preexistentes a la infección, como las dimensiones de los elementos vasculares o la composición química del xilema, y factores inducidos por la infección, como la formación de barreras de compartimentación o la producción de compuestos fenólicos

    Análisis espacial medioambiental de la mortalidad en el municipio de Madrid.

    Get PDF
    The first purpose of this study is to compare mortality indicators in the 21 districts of Madrid for 1987-88 and 1995-96 periods. Mortality indicator used Aceptado: 15/V/2001. * Departamento de Ecología Humana y Población. Universidad Complutense de Madrid. 353 Jaime Martín Moreno, et al. Análisis espacial medioambiental de la mortalidad... were the comparative mortality figure with the direct method. The second purpose is to identify differences in mortality between districts in function of certain socioeconomic factors. Socioeconomic indicators were the rate of unemployed, rate of people without studies, rate of people with high studies, rate of unskilled workers and the rate of managerial workers. The statistical correlation between socioeconomic indicators and mortality indicators was studied by Spearman's rank correlation coefficient. This study has detected significant differences in mortality between the 21 districts of Madrid and high correlation between mortality and socioeconomic indicators.El primer objetivo del estudio es comparar la mortalidad en los 21 distritos de Madrid para los periodos 1987-88 y 1995-96. El indicador de mortalidad utilizado fue la tasa comparativa de mortalidad mediante el método directo. El segundo objetivo es identificar diferencias en mortalidad entre distritos en función de ciertos factores socioeconómicos. Los factores socioeconómicos que se han tenido en cuenta son la tasa de desempleo, la tasa de personas sin estudios, tasa de personas con estudios universitarios, tasa de trabajadores no cualificados y tasa de trabajadores dentro de la categoría de directivos. Se ha utilizado el coeficiente de correlación de Spearman. En el estudio se han detectado importantes diferencias de mortalidad entre los 21 distritos de Madrid, observándose una fuerte correlación entre la mortalidad y los indicadores socioeconómicos utilizados
    corecore