Optimization of optical transmission capacity

A method for transmitting a coherent optical data signal includes receiving a data signal from an interface, and encoding the data signal with a forward error correcting (FEC) encoder according to a mix of modulation formats. The FEC encoder generates an FEC encoded signal which is used to generate modulation symbols according to the modulation formats. The FEC encoded signal of modulation symbols is spectrally shaped to generate a shaped signal, and pre-distorted before transmission. The shaped signal is pre-distorted by adding a predetermined amount of chromatic dispersion to generate a smoothed signal, and the smoothed signal is transmitted according to the modulation formats

Compensation of intra-channel nonlinear fibre impairments using simplified digital back-propagation algorithm

We investigate a digital back-propagation simplification method to enable computationally-efficient digital nonlinearity compensation for a coherently-detected 112 Gb/s polarization multiplexed quadrature phase shifted keying transmission over a 1,600 km link (20x80km) with no inline compensation. Through numerical simulation, we report up to 80% reduction in required back-propagation steps to perform nonlinear compensation, in comparison to the standard back-propagation algorithm. This method takes into account the correlation between adjacent symbols at a given instant using a weighted-average approach, and optimization of the position of nonlinear compensator stage to enable practical digital back-propagation

Intra-channel nonlinearity compensation for PM-16QAM traffic co-propagating with 28Gbaud m-ary QAM neighbours

We quantify the benefits of intra-channel nonlinear compensation in meshed optical networks, in view of network configuration, fibre design aspect, and dispersion management. We report that for a WDM optical transport network employing flexible 28Gbaud PM-mQAM transponders with no in-line dispersion compensation, intrachannel nonlinear compensation, for PM-16QAM through traffic, offers significant improvements of up to 4dB in nonlinear tolerance (Q-factor) irrespective of the co-propagating modulation format, and that this benefit is further enhanced (1.5dB) by increasing local link dispersion. For dispersion managed links, we further report that advantages of intra-channel nonlinear compensation increase with in-line dispersion compensation ratio, with 1.5dB improvements after 95% in-line dispersion compensation, compared to uncompensated transmission

Noise and transmission performance improvement of broadband distributed Raman amplifier using bidirectional Raman pumping with dual order co-pumps

We demonstrate a low noise bidirectional broadband distributed Raman pumping scheme combining dual order co-propagated pumps without increasing the signal RIN level. The noise performance improvement is compared experimentally and numerically with conventional counter-pumping only and bidirectional pumping with only a 2nd order co-pump for a 70nm bandwidth and 61.5km distributed Raman amplifier. The proposed broadband pumping scheme shows 1.2dB maximum noise figure improvement and extends the long-haul transmission reach up to 6150km with a Q-factor improvement of ~0.7dB compared with counter-pumping only scheme

Polarization multiplexed 16QAM transmission employing modified digital back-propagation

We experimentally demonstrate performance enhancements enabled by weighted digital back propagation method for 28 Gbaud PM-16QAM transmission systems, over a 250 km ultra-large area fibre, using only one back-propagation step for the entire link, enabling up to 3 dB improvement in power tolerance with respect to linear compensation only. We observe that this is roughly the same improvement that can be obtained with the conventional, computationally heavy, non-weighted digital back propagation compensation with one step per span. As a further benchmark, we analyze performance improvement as a function of number of steps, and show that the performance improvement saturates at approximately 20 steps per span, at which a 5 dB improvement in power tolerance is obtained with respect to linear compensation only. Furthermore, we show that coarse-step self-phase modulation compensation is inefficient in wavelength division multiplexed transmission

Optical performance monitoring from FIR filter coefficients in coherent receivers

Abstract: We present a robust and precise optical performance monitoring technique from FIR filter coefficients in coherent receivers with digital equalization. Residual chromatic dispersion, DGD and OSNR are simultaneously estimated from measured 111 Gbit/s data

Optical Fiber Networks for Remote Fiber Optic Sensors

This paper presents an overview of optical fiber sensor networks for remote sensing. Firstly, the state of the art of remote fiber sensor systems has been considered. We have summarized the great evolution of these systems in recent years; this progress confirms that fiber-optic remote sensing is a promising technology with a wide field of practical applications. Afterwards, the most representative remote fiber-optic sensor systems are briefly explained, discussing their schemes, challenges, pros and cons. Finally, a synopsis of the main factors to take into consideration in the design of a remote sensor system is gathered