Monovinyl sulfone beta-cyclodextrin. A flexible drug carrier system

Cyclodextrins have been conjugated to target various receptors and have also been functionalized with carbohydrates for targeting specific organs. However, this approach is based on a rigid design that implies the ad hoc synthesis of each cyclodextrin-targeting agent conjugate. We hypothesized that: 1) a modular design that decouples the carrier function from the targeting function leads to a flexible system, 2) combining the reactivity of the vinyl sulfone group toward biomolecules that act as targeting agents with the ability of cyclodextrin to form complexes with a wide range of drugs may yield a versatile system that allows the targeting of different organs with different drugs, and 3) the higher reactivity of histidine residues toward the vinyl sulfone group can be exploited to couple the cyclodextrin to the targeting system with a degree of regioselectivity. As a proof of concept, we synthesized a monovinyl sulfone beta-cyclodextrin (module responsible for the payload), which, after coupling to recombinant antibody fragments raised against Trypanosoma brucei (module responsible for targeting) and loading with nitrofurazone (module responsible for therapeutic action) resulted in an effective delivery system that targets the surface of the parasites and shows trypanocidal activity

Computational investigation of diesel nozzle internal flow during the complete injection event

[EN] Currently, diesel engines are calibrated using more and more complex multiple injection strategies. Under these conditions, the characteristics of the flow exiting the fuel injector are strongly affected by the transient interaction between the needle, the sac volume and the orifices, which are not yet clear. In the current paper, a methodology combining a 1D injector model and 3D-CFD simulations is proposed. First, the characteristics of the nozzle flow have been experimentally assessed in transient conditions by means of injection rate and momentum flux measurements. Later, the 3D-CFD modeling approach has been validated at steady-state fixed lift conditions. Finally, a previously developed 1D injector model has been used to extract the needle lift profiles and transient pressure boundary conditions used for the full-transient 3D-CFD simulations, using adaptive mesh refinement (AMR) strategies to be able to simulate the complete injection rate starting from 1 mu m lift.This work was partly sponsored by "Ministerio de Economia y Competitividad'', of the Spanish Government, in the frame of the Project "Estudio de la interaccion chorro-pared en condiciones realistas de motor'', Reference TRA2015-67679-c2-1-R. The authors would like also to thank the computer resources, technical expertise and assistance provided by Universidad de Valencia in the use of the supercomputer "Tirant''. Mr. Jaramillo's Thesis is funded by "Conselleria d'Educacio, Cultura i Esports'' of Generalitat Valenciana in the frame of the program "Programa VALI + D para investigadores en formacion, Reference ACIF/2015/040.Salvador, FJ.; De La Morena, J.; Bracho Leon, G.; Jaramillo-Císcar, D. (2018). Computational investigation of diesel nozzle internal flow during the complete injection event. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40(3):153-167. https://doi.org/10.1007/s40430-018-1074-zS153167403Hall CAS, Lambert JG, Balogh SB (2014) EROI of different fuels and the implications for society. Energy Policy 64:141–152. https://doi.org/10.1016/j.enpol.2013.05.049Lujan JM, Tormos B, Salvador FJ, Gargar K (2009) Comparative analysis of a DI diesel engine fuelled with biodiesel blends during the European MVEG-A cycle: preliminary study (I). Biomass Bioenergy 33:941–947. https://doi.org/10.1016/j.biombioe.2009.02.004Pickett LM, Siebers DL (2004) Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure. Combust Flame 138:114–135. https://doi.org/10.1016/j.combustflame.2004.04.006Dec JE (1997) A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging. SAE Tech. Pap. 970873Wang X, Huang Z, Zhang W et al (2011) Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray. Appl Energy 88:1620–1628. https://doi.org/10.1016/j.apenergy.2010.11.035Sayin C, Gumus M, Canakci M (2013) Influence of injector hole number on the performance and emissions of a di diesel engine fueled with biodiesel-diesel fuel blends. Appl Therm Eng 61:121–128. https://doi.org/10.1016/j.applthermaleng.2013.07.038Mohan B, Yang W, Chou SK (2013) Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review. Renew Sustain Energy Rev 28:664–676. https://doi.org/10.1016/j.rser.2013.08.051Payri R, Salvador FJ, Gimeno J, De la Morena J (2011) Influence of injector technology on injection and combustion development, Part 1: hydraulic characterization. Appl Energy 88:1068–1074. https://doi.org/10.1016/j.apenergy.2010.10.012Park SW, Kim JW, Lee CS (2006) Effect of injector type on fuel-air mixture formation of high-speed diesel sprays. Proc Inst Mech Eng D 220:647–659. https://doi.org/10.1243/09544070D20304Moon S, Komada K, Sato K et al (2015) Ultrafast X-ray study of multi-hole GDI injector sprays: effects of nozzle hole length and number on initial spray formation. Exp Therm Fluid Sci 68:68–81. https://doi.org/10.1016/j.expthermflusci.2015.03.027Powell CF, Kastengren AL, Liu Z, Fezzaa K (2010) The effects of diesel injector needle motion on spray structure. J Eng Gas Turbines Power 133:12802. https://doi.org/10.1115/1.4001073Huang W, Moon S, Ohsawa K (2016) Near-nozzle dynamics of diesel spray under varied needle lifts and its prediction using analytical model. Fuel 180:292–300. https://doi.org/10.1016/j.fuel.2016.04.042Sun Z-Y, Li G-X, Chen C et al (2015) Numerical investigation on effects of nozzle’s geometric parameters on the flow and the cavitation characteristics within injector’s nozzle for a high-pressure common-rail DI diesel engine. Energy Convers Manag 89:843–861. https://doi.org/10.1016/j.enconman.2014.10.047Devassy BM, Habchi C, Daniel E (2015) Atomization modelling of liquid jets using a two-surface density approach. At Sprays 25:47–80Moon S, Gao Y, Park S et al (2015) Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection. Fuel 150:112–122. https://doi.org/10.1016/j.fuel.2015.01.097Payri R, Salvador FJ, Carreres M, De la Morena J (2016) Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis. Energy Convers Manag 114:376–391. https://doi.org/10.1016/j.enconman.2016.02.043Plamondon E, Seers P (2014) Development of a simplified dynamic model for a piezoelectric injector using multiple injection strategies with biodiesel/diesel-fuel blends. Appl Energy 131:411–424. https://doi.org/10.1016/j.apenergy.2014.06.039Postrioti L, Malaguti S, Bosi M et al (2014) Experimental and numerical characterization of a direct solenoid actuation injector for diesel engine applications. Fuel 118:316–328. https://doi.org/10.1016/j.fuel.2013.11.001Desantes JM, Salvador FJ, Lopez JJ, De la Morena J (2011) Study of mass and momentum transfer in diesel sprays based on X-ray mass distribution measurements and on a theoretical derivation. Exp Fluids 50:233–246. https://doi.org/10.1007/s00348-010-0919-8De la Morena J, Neroorkar K, Plazas AH et al (2013) Numerical analysis of the influence of diesel nozzle design on internal flow characteristics for 2-valve diesel engine application. At Sprays 23:97–118. https://doi.org/10.1615/AtomizSpr.2013006361Duke DJ, Schmidt DP, Neroorkar K et al (2013) High-resolution large eddy simulations of cavitating gasoline-ethanol blends. Int J Engine Res 14:578–589. https://doi.org/10.1177/1468087413501824Mitroglou N, McLorn M, Gavaises M et al (2014) Instantaneous and ensemble average cavitation structures in diesel micro-channel flow orifices. Fuel 116:736–742. https://doi.org/10.1016/j.fuel.2013.08.060Wang X, Li K, Su W (2012) Experimental and numerical investigations on internal flow characteristics of diesel nozzle under real fuel injection conditions. Exp Therm Fluid Sci 42:204–211. https://doi.org/10.1016/j.expthermflusci.2012.04.022Sou A, Pratama RH (2016) Effects of asymmetric inflow on cavitation in fuel injector and discharged liquid jet. At Sprays 26:939–959. https://doi.org/10.1615/AtomizSpr.2015013501Xue Q, Battistoni M, Powell CF et al (2015) An Eulerian CFD model and X-ray radiography for coupled nozzle flow and spray in internal combustion engines. Int J Multiph Flow 70:77–88. https://doi.org/10.1016/j.ijmultiphaseflow.2014.11.012Castilla R, Gamez-Montero PJ, Ertrk N et al (2010) Numerical simulation of turbulent flow in the suction chamber of a gearpump using deforming mesh and mesh replacement. Int J Mech Sci 52:1334–1342. https://doi.org/10.1016/j.ijmecsci.2010.06.009Parlak Z, Engin T (2012) Time-dependent CFD and quasi-static analysis of magnetorheological fluid dampers with experimental validation. Int J Mech Sci 64:22–31. https://doi.org/10.1016/j.ijmecsci.2012.08.006Chiatti G, Chiavola O, Palmieri F (2009) Spray modeling for diesel engine performance analysis. SAE Tech Pap 2009-01-0835. https://doi.org/10.4271/2009-01-0835Marcer R, Audiffren C, Viel A, et al (2010) Coupling 1D system AMESim and 3D CFD EOLE models for diesel injection simulation Renault. In: ILASS—Eur. 2010, 23rd Annu. Conf. Liq. At. Spray Syst., pp 1–10Desantes JM, Salvador FJ, Carreres M, Martínez-López J (2014) Large-eddy simulation analysis of the influence of the needle lift on the cavitation in diesel injector nozzles. Proc Inst Mech Eng D 229:407–423. https://doi.org/10.1177/0954407014542627Battistoni M, Xue Q, Som S (2016) Large-eddy simulation (LES) of spray transients: start and end of injection phenomena. Oil Gas Sci Technol 71:24. https://doi.org/10.2516/ogst/2015024CONVERGE is a trade mark of convergent science. https://convergecfd.comMacian V, Bermúdez V, Payri R, Gimeno J (2003) New technique for determination of internal geometry of a diesel nozzle with the use of silicone methodology. Exp Tech 27:39–43. https://doi.org/10.1111/j.1747-1567.2003.tb00107.xDabiri S, Sirignano WA, Joseph DD (2007) Cavitation in an orifice flow. Phys Fluids 19:72112. https://doi.org/10.1063/1.2750655Mohan B, Yang W, Chou SK (2014) Cavitation in injector nozzle holes—a parametric study. Eng Appl Comput Fluid Mech 8:70–81Salvador FJ, Hoyas S, Novella R, Martinez-Lopez J (2011) Numerical simulation and extended validation of two-phase compressible flow in diesel injector nozzles. Proc Inst Mech Eng D 225:545–563. https://doi.org/10.1177/09544070JAUTO1569Som S, Longman DE, Ramirez AI, Aggarwal S (2012) Influence of nozzle orifice geometry and fuel properties on flow and cavitation characteristics of a diesel injector. In: Fuel Inject. Automot. Eng., pp 112–126Desantes JM, Salvador FJ, Carreres M, Jaramillo D (2015) Experimental characterization of the thermodynamic properties of diesel fuels over a wide range of pressures and temperatures. SAE Int J Fuels Lubr 8:2015-01-0951. https://doi.org/10.4271/2015-01-0951Bosch W (1966) The fuel rate indicator: a new measuring instrument for display of the characteristics of individual injection. SAE Pap. 660749Payri R, Salvador FJ, Gimeno J, Bracho G (2008) A new methodology for correcting the signal cumulative phenomenon on injection rate measurements. Exp Tech 32:46–49. https://doi.org/10.1111/j.1747-1567.2007.00188.xPayri F, Payri R, Salvador FJ, Martínez-López J (2011) A contribution to the understanding of cavitation effects in diesel injector nozzles through a combined experimental and computational investigation. Comput Fluids 58:88–101. https://doi.org/10.1016/j.compfluid.2012.01.005Lichtarowicz AK, Duggins RK, Markland E (1965) Discharge coefficients for incompressible non-cavitating flow through long orifices. J Mech Eng Sci 7:210–219. https://doi.org/10.1243/JMES_JOUR_1965_007_029_02Lopez JJ, Salvador FJ, De la Garza OA, Arrègle J (2012) Characterization of the pressure losses in a common rail diesel injector. Proc Inst Mech Eng D 226:1697–1706. https://doi.org/10.1177/0954407012447020Salvador FJ, Carreres M, Jaramillo D, Martínez-López J (2015) Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics. Energy Convers Manag 103:284–299. https://doi.org/10.1016/j.enconman.2015.05.062LMS (2010) Imagine.Lab AMESim v.10. User’s manualPayri R, Salvador FJ, Martí-Aldaraví P, Martínez-López J (2012) Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: detailed injection system model. Energy Convers Manag 54:90–99. https://doi.org/10.1016/j.enconman.2011.10.00

Monoolein Lipid Phases as Incorporation and Enrichment Materials for Membrane Protein Crystallization

The crystallization of membrane proteins in amphiphile-rich materials such as lipidic cubic phases is an established methodology in many structural biology laboratories. The standard procedure employed with this methodology requires the generation of a highly viscous lipidic material by mixing lipid, for instance monoolein, with a solution of the detergent solubilized membrane protein. This preparation is often carried out with specialized mixing tools that allow handling of the highly viscous materials while minimizing dead volume to save precious membrane protein sample. The processes that occur during the initial mixing of the lipid with the membrane protein are not well understood. Here we show that the formation of the lipidic phases and the incorporation of the membrane protein into such materials can be separated experimentally. Specifically, we have investigated the effect of different initial monoolein-based lipid phase states on the crystallization behavior of the colored photosynthetic reaction center from Rhodobacter sphaeroides. We find that the detergent solubilized photosynthetic reaction center spontaneously inserts into and concentrates in the lipid matrix without any mixing, and that the initial lipid material phase state is irrelevant for productive crystallization. A substantial in-situ enrichment of the membrane protein to concentration levels that are otherwise unobtainable occurs in a thin layer on the surface of the lipidic material. These results have important practical applications and hence we suggest a simplified protocol for membrane protein crystallization within amphiphile rich materials, eliminating any specialized mixing tools to prepare crystallization experiments within lipidic cubic phases. Furthermore, by virtue of sampling a membrane protein concentration gradient within a single crystallization experiment, this crystallization technique is more robust and increases the efficiency of identifying productive crystallization parameters. Finally, we provide a model that explains the incorporation of the membrane protein from solution into the lipid phase via a portal lamellar phase

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Background: Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. // Methods: We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung's disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. // Findings: We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung's disease) from 264 hospitals (89 in high-income countries, 166 in middle-income countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in low-income countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. // Interpretation: Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between low-income, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

Pooled analysis of WHO Surgical Safety Checklist use and mortality after emergency laparotomy

Background The World Health Organization (WHO) Surgical Safety Checklist has fostered safe practice for 10 years, yet its place in emergency surgery has not been assessed on a global scale. The aim of this study was to evaluate reported checklist use in emergency settings and examine the relationship with perioperative mortality in patients who had emergency laparotomy. Methods In two multinational cohort studies, adults undergoing emergency laparotomy were compared with those having elective gastrointestinal surgery. Relationships between reported checklist use and mortality were determined using multivariable logistic regression and bootstrapped simulation. Results Of 12 296 patients included from 76 countries, 4843 underwent emergency laparotomy. After adjusting for patient and disease factors, checklist use before emergency laparotomy was more common in countries with a high Human Development Index (HDI) (2455 of 2741, 89.6 per cent) compared with that in countries with a middle (753 of 1242, 60.6 per cent; odds ratio (OR) 0.17, 95 per cent c.i. 0.14 to 0.21, P <0001) or low (363 of 860, 422 per cent; OR 008, 007 to 010, P <0.001) HDI. Checklist use was less common in elective surgery than for emergency laparotomy in high-HDI countries (risk difference -94 (95 per cent c.i. -11.9 to -6.9) per cent; P <0001), but the relationship was reversed in low-HDI countries (+121 (+7.0 to +173) per cent; P <0001). In multivariable models, checklist use was associated with a lower 30-day perioperative mortality (OR 0.60, 0.50 to 073; P <0.001). The greatest absolute benefit was seen for emergency surgery in low- and middle-HDI countries. Conclusion Checklist use in emergency laparotomy was associated with a significantly lower perioperative mortality rate. Checklist use in low-HDI countries was half that in high-HDI countries.Peer reviewe

Global variation in anastomosis and end colostomy formation following left-sided colorectal resection

Background End colostomy rates following colorectal resection vary across institutions in high-income settings, being influenced by patient, disease, surgeon and system factors. This study aimed to assess global variation in end colostomy rates after left-sided colorectal resection. Methods This study comprised an analysis of GlobalSurg-1 and -2 international, prospective, observational cohort studies (2014, 2016), including consecutive adult patients undergoing elective or emergency left-sided colorectal resection within discrete 2-week windows. Countries were grouped into high-, middle- and low-income tertiles according to the United Nations Human Development Index (HDI). Factors associated with colostomy formation versus primary anastomosis were explored using a multilevel, multivariable logistic regression model. Results In total, 1635 patients from 242 hospitals in 57 countries undergoing left-sided colorectal resection were included: 113 (6·9 per cent) from low-HDI, 254 (15·5 per cent) from middle-HDI and 1268 (77·6 per cent) from high-HDI countries. There was a higher proportion of patients with perforated disease (57·5, 40·9 and 35·4 per cent; P < 0·001) and subsequent use of end colostomy (52·2, 24·8 and 18·9 per cent; P < 0·001) in low- compared with middle- and high-HDI settings. The association with colostomy use in low-HDI settings persisted (odds ratio (OR) 3·20, 95 per cent c.i. 1·35 to 7·57; P = 0·008) after risk adjustment for malignant disease (OR 2·34, 1·65 to 3·32; P < 0·001), emergency surgery (OR 4·08, 2·73 to 6·10; P < 0·001), time to operation at least 48 h (OR 1·99, 1·28 to 3·09; P = 0·002) and disease perforation (OR 4·00, 2·81 to 5·69; P < 0·001). Conclusion Global differences existed in the proportion of patients receiving end stomas after left-sided colorectal resection based on income, which went beyond case mix alone