Mechanical study of PLA-PCL fibers during in vitro degradation

The aliphatic polyesters are widely used in biomedical applications since they are susceptible to hydrolytic and/or enzymatic chain cleavage, leading to alpha-hydroxyacids, generally metabolized in the human body. This is particularly useful for many biomedical applications, especially, for temporary mechanical supports in regenerative medical devices. Ideally, the degradation should be compatible with the tissue recovering. In this work, the evolution of mechanical properties during degradation is discussed based on experimental data. The decrease of tensile strength of PLA-PCL fibers follows the same trend as the decrease of molecular weight, and so it can also be modeled using a first order equation. For each degradation stage, hyperelastic models such as Neo-Hookean, Mooney-Rivlin and second reduced order, allow a reasonable approximation of the material behavior. Based on this knowledge, constitutive models that describe the mechanical behavior during degradation are proposed and experimentally validated. The proposed theoretical models and methods may be adapted and used in other biodegradable materials, and can be considered fundamental tools in the design of regenerative medical devices where strain energy is an important requirement, such as, for example, ligaments, cartilage and stents

Search for Supersymmetry with Gauge-Mediated Breaking in Diphoton Events with Missing Transverse Energy at CDF II

accepted to Phys. Rev. LettWe present the results of a search for supersymmetry with gauge-mediated breaking and \NONE\to\gamma\Gravitino in the $\gamma\gamma$+missing transverse energy final state. In 2.6$\pm$0.2 \invfb of $p{\bar p}$ collisions at $\sqrt{s}$$=$1.96 TeV recorded by the CDF II detector we observe no candidate events, consistent with a standard model background expectation of 1.4$\pm$0.4 events. We set limits on the cross section at the 95% C.L. and place the world's best limit of 149\gevc on the \none mass at $\tau_{\tilde{\chi}_1^0}$$We present the results of a search for supersymmetry with gauge-mediated breaking and χ˜10→γG˜ in the γγ+missing transverse energy final state. In 2.6±0.2  fb-1 of pp̅ collisions at √s=1.96  TeV recorded by the CDF II detector we observe no candidate events, consistent with a standard model background expectation of 1.4±0.4 events. We set limits on the cross section at the 95% C.L. and place the world’s best limit of 149  GeV/c2 on the χ˜10 mass at τχ˜10≪1  ns. We also exclude regions in the χ˜10 mass-lifetime plane for τχ˜10≲2  ns.Peer reviewe

Measurements of branching fraction ratios and CP asymmetries in B+/- ->D_CP K+/- decays in hadron collisions

We reconstruct B+/- -> D K+/- decays in a data sample collected by the CDF II detector at the Tevatron collider corresponding to 1 fb-1 of integrated luminosity. We select decay modes where the D meson decays to either K- pi+ (flavor eigenstate) or K- K+, pi- pi+ (CP-even eigenstates), and measure the direct CP asymmetry A_CP+ = 0.39 +/- 0.17(stat) +/- 0.04(syst), and the double ratio of CP-even to flavor eigenstate branching fractions R_CP+ = 1.30 +/- 0.24(stat) +/- 0.12(syst). These measurements will improve the determination of the CKM angle gamma. They are performed here for the first time using data from hadron collisions.We reconstruct B±→DK± decays in a data sample collected by the CDF II detector at the Tevatron collider corresponding to 1  fb-1 of integrated luminosity. We select decay modes where the D meson decays to either K-π+ (flavor eigenstate) or K-K+, π-π+ (CP-even eigenstates), and measure the direct CP asymmetry ACP+=0.39±0.17(stat)±0.04(syst), and the double ratio of CP-even to flavor eigenstate branching fractions RCP+=1.30±0.24(stat)±0.12(syst). These measurements will improve the determination of the Cabibbo-Kobayashi-Maskawa angle γ. They are performed here for the first time using data from hadron collisions.Peer reviewe

Inclusive Search for Standard Model Higgs Boson Production in the WW Decay Channel using the CDF II Detector

We present a search for standard model (SM) Higgs boson production using ppbar collision data at sqrt(s) = 1.96 TeV, collected with the CDF II detector and corresponding to an integrated luminosity of 4.8 fb-1. We search for Higgs bosons produced in all processes with a significant production rate and decaying to two W bosons. We find no evidence for SM Higgs boson production and place upper limits at the 95% confidence level on the SM production cross section (sigma(H)) for values of the Higgs boson mass (m_H) in the range from 110 to 200 GeV. These limits are the most stringent for m_H > 130 GeV and are 1.29 above the predicted value of sigma(H) for mH = 165 GeV.We present a search for standard model (SM) Higgs boson production using pp̅ collision data at √s=1.96  TeV, collected with the CDF II detector and corresponding to an integrated luminosity of 4.8  fb-1. We search for Higgs bosons produced in all processes with a significant production rate and decaying to two W bosons. We find no evidence for SM Higgs boson production and place upper limits at the 95% confidence level on the SM production cross section (σH) for values of the Higgs boson mass (mH) in the range from 110 to 200 GeV. These limits are the most stringent for mH>130  GeV and are 1.29 above the predicted value of σH for mH=165  GeV.Peer reviewe

Measurement of the Lambda_b Lifetime in Lambda_b -> Lambda_c+ pi- Decays in p-pbar Collisions at sqrt(s) = 1.96 TeV

Submitted to Phys. Rev. LettWe report a measurement of the lifetime of the Lambda_b baryon in decays to the Lambda_C+ pi- final state in a sample corresponding to 1.1 fb^-1 collected in p-pbar collisions at sqrt(s) = 1.96 TeV by the CDF II detector at the Tevatron collider. Using a sample of about 3000 fully reconstructed Lambda_b events we measure tau(Lambda_b) = 1.401 +- 0.046 (stat) +- 0.035 (syst) ps (corresponding to c.tau(Lambda_b) = 420.1 +- 13.7 (stat) +- 10.6 (syst) um, where c is the speed of light). The ratio of this result and the world average B^0 lifetime yields tau(Lambda_b)/tau(B^0) = 0.918 +- 0.038 (stat and syst), in good agreement with recent theoretical predictions.We report a measurement of the lifetime of the Λb0 baryon in decays to the Λc+π- final state in a sample corresponding to 1.1  fb-1 collected in pp̅ collisions at √s=1.96  TeV by the CDF II detector at the Tevatron collider. Using a sample of about 3000 fully reconstructed Λb0 events we measure τ(Λb0)=1.401±0.046(stat)±0.035(syst)  ps (corresponding to cτ(Λb0)=420.1±13.7(stat)±10.6(syst)  μm, where c is the speed of light). The ratio of this result and the world average B0 lifetime yields τ(Λb0)/τ(B0)=0.918±0.038 (stat) and (syst), in good agreement with recent theoretical predictions.Peer reviewe

Measurement of the Top Quark Mass and ppbar -> ttbar Cross Section in the All-Hadronic Mode with the CDFII Detector

Submitted to Phys. Rev. DWe present a measurement of the top quark mass and of the top-antitop pair production cross section using p-pbar data collected with the CDFII detector at the Tevatron Collider at the Fermi National Accelerator Laboratory and corresponding to an integrated luminosity of 2.9 fb-1. We select events with six or more jets satisfying a number of kinematical requirements imposed by means of a neural network algorithm. At least one of these jets must originate from a b quark, as identified by the reconstruction of a secondary vertex inside the jet. The mass measurement is based on a likelihood fit incorporating reconstructed mass distributions representative of signal and background, where the absolute jet energy scale (JES) is measured simultaneously with the top quark mass. The measurement yields a value of 174.8 +- 2.4(stat+JES) ^{+1.2}_{-1.0}(syst) GeV/c^2, where the uncertainty from the absolute jet energy scale is evaluated together with the statistical uncertainty. The procedure measures also the amount of signal from which we derive a cross section, sigma_{ttbar} = 7.2 +- 0.5(stat) +- 1.0 (syst) +- 0.4 (lum) pb, for the measured values of top quark mass and JES.We present a measurement of the top quark mass and of the top-antitop (tt̅ ) pair production cross section using pp̅ data collected with the CDF II detector at the Tevatron Collider at the Fermi National Accelerator Laboratory and corresponding to an integrated luminosity of 2.9  fb-1. We select events with six or more jets satisfying a number of kinematical requirements imposed by means of a neural-network algorithm. At least one of these jets must originate from a b quark, as identified by the reconstruction of a secondary vertex inside the jet. The mass measurement is based on a likelihood fit incorporating reconstructed mass distributions representative of signal and background, where the absolute jet energy scale (JES) is measured simultaneously with the top quark mass. The measurement yields a value of 174.8±2.4(stat+JES)-1.0+1.2(syst)  GeV/c2, where the uncertainty from the absolute jet energy scale is evaluated together with the statistical uncertainty. The procedure also measures the amount of signal from which we derive a cross section, σtt̅ =7.2±0.5(stat)±1.0(syst)±0.4(lum)  pb, for the measured values of top quark mass and JES.Peer reviewe

Genomic-Assisted Enhancement in Stress Tolerance for Productivity Improvement in Sorghum

Sorghum [Sorghum bicolor (L.) Moench], the fifth most important cereal crop in the world after wheat, rice, maize, and barley, is a multipurpose crop widely grown for food, feed, fodder, forage, and fuel, vital to the food security of many of the world’s poorest people living in fragile agroecological zones. Globally, sorghum is grown on ~42 million hectares area in ~100 countries of Africa, Asia, Oceania, and the Americas. Sorghum grain is used mostly as food (~55%), in the form of flat breads and porridges in Asia and Africa, and as feed (~33%) in the Americas. Stover of sorghum is an increasingly important source of dry season fodder for livestock, especially in South Asia. In India, area under sorghum cultivation has been drastically come down to less than one third in the last six decades but with a limited reduction in total production suggesting the high-yield potential of this crop. Sorghum productivity is far lower compared to its genetic potential owing to a limited exploitation of genetic and genomic resources developed in the recent past. Sorghum production is challenged by various abiotic and biotic stresses leading to a significant reduction in yield. Advances in modern genetics and genomics resources and tools could potentially help to further strengthen sorghum production by accelerating the rate of genetic gains and expediting the breeding cycle to develop cultivars with enhanced yield stability under stress. This chapter reviews the advances made in generating the genetic and genomics resources in sorghum and their interventions in improving the yield stability under abiotic and biotic stresses to improve the productivity of this climate-smart cereal