Why Levallois? A Morphometric Comparison of Experimental ‘Preferential’ Levallois Flakes versus Debitage Flakes

Background Middle Palaeolithic stone artefacts referred to as ‘Levallois’ have caused considerable debate regarding issues of technological predetermination, cognition and linguistic capacities in extinct hominins. Their association with both Neanderthals and early modern humans has, in particular, fuelled such debate. Yet, controversy exists regarding the extent of ‘predetermination’ and ‘standardization’ in so-called ‘preferential Levallois flakes’ (PLFs). Methodology/Principal Findings Using an experimental and morphometric approach, we assess the degree of standardization in PLFs compared to the flakes produced during their manufacture. PLFs possess specific properties that unite them robustly as a group or ‘category’ of flake. The properties that do so, relate most strongly to relative flake thicknesses across their surface area. PLFs also exhibit significantly less variability than the flakes generated during their production. Again, this is most evident in flake thickness variables. A further aim of our study was to assess whether the particular PLF attributes identified during our analyses can be related to current knowledge regarding flake functionality and utility. Conclusions/Significance PLFs are standardized in such a manner that they may be considered ‘predetermined’ with regard to a specific set of properties that distinguishes them statistically from a majority of other flakes. Moreover, their attributes can be linked to factors that, based on current knowledge, are desirable features in flake tools (e.g. durability, capacity for retouch, and reduction of torque). As such, our results support the hypothesis that the lengthy, multi-phase, and hierarchically organized process of Levallois reduction was a deliberate, engineered strategy orientated toward specific goals. In turn, our results support suggestions that Levallois knapping relied on a cognitive capacity for long-term working memory. This is consistent with recent evidence suggesting that cognitive distinctions between later Pleistocene hominins such as the Neanderthals and anatomically modern humans were not as sharp as some scholars have previously suggested

Estimating the Richness of a Population When the Maximum Number of Classes Is Fixed: A Nonparametric Solution to an Archaeological Problem

Background: Estimating assemblage species or class richness from samples remains a challenging, but essential, goal. Though a variety of statistical tools for estimating species or class richness have been developed, they are all singly-bounded: assuming only a lower bound of species or classes. Nevertheless there are numerous situations, particularly in the cultural realm, where the maximum number of classes is fixed. For this reason, a new method is needed to estimate richness when both upper and lower bounds are known. Methodology/Principal Findings: Here, we introduce a new method for estimating class richness: doubly-bounded confidence intervals (both lower and upper bounds are known). We specifically illustrate our new method using the Chao1 estimator, rarefaction, and extrapolation, although any estimator of asymptotic richness can be used in our method. Using a case study of Clovis stone tools from the North American Lower Great Lakes region, we demonstrate that singly-bounded richness estimators can yield confidence intervals with upper bound estimates larger than the possible maximum number of classes, while our new method provides estimates that make empirical sense. Conclusions/Significance: Application of the new method for constructing doubly-bound richness estimates of Clovis stone tools permitted conclusions to be drawn that were not otherwise possible with singly-bounded richness estimates, namely, that Lower Great Lakes Clovis Paleoindians utilized a settlement pattern that was probably more logistical in nature than residential. However, our new method is not limited to archaeological applications. It can be applied to any set of data for which there is a fixed maximum number of classes, whether that be site occupancy models, commercial products (e.g. athletic shoes), or census information (e.g. nationality, religion, age, race)

Early stage blunting causes rapid reductions in stone tool performance

Palaeolithic stone technologies have never been investigated in terms of how sharpness influences their ability to cut. In turn, there is little understanding of how quickly stone cutting edges blunt, how past populations responded to any consequent changes in performance, or how these factors influenced the Palaeolithic archaeological record. Presented here is experimental data quantitatively detailing how variation in edge sharpness influences stone tool cutting performance. Significant increases in force (N) and material displacement (mm) requirements occur rapidly within early stages of blunting, with a single abrasive cutting stroke causing, on average, a 38% increase in the force needed to initiate a cut. In energetic terms, this equates to a 70% increase in work (J). Subsequent to early stages of blunting we identify a substantial drop in the impact of additional edge abrasion. We also demonstrate how edge (included) angle significantly influences cutting force and energy requirements and how it co-varies with sharpness. Amongst other conclusions, we suggest that rapid reductions in performance due to blunting may account for the abundance of lithic artefacts at some archaeological sites, the speed that resharpening behaviours altered tool forms, and the lack of microscopic wear traces on many lithic implements

The exceptional abandonment of metal tools by North American hunter-gatherers, 3000 B.P.

Most prehistoric societies that experimented with copper as a tool raw material eventually abandoned stone as their primary medium for tool making. However, after thousands of years of experimentation with this metal, North American hunter-gatherers abandoned it and returned to the exclusive use of stone. Why? We experimentally confirmed that replica copper tools are inferior to stone ones when each is sourced in the same manner as their archaeological counterparts and subjected to identical tasks. Why, then, did copper consistently lead to more advanced metallurgy in most other areas of the world? We suggest that it was the unusual level of purity in the North American copper sourced by North American groups, and that naturally occurring alloys yielded sufficiently superior tools to encourage entry into the copper-bronze-iron continuum of tool manufacture in other parts of the world

Modern thermoplastic (hot glue) versus organic-based adhesives and haft bond failure rate in experimental prehistoric ballistics

Abstract: The prehistoric production of composite technologies throughout human evolution was facilitated greatly by the use of adhesives. One such technology was projectile weaponry, which used adhesive to attach a stone point to a wooden shaft. Prehistoric projectile weaponry is often studied via experimental archaeology, which recreates ancient technologies to understand their manufacture and function. Here, we explore whether a modern thermoplastic adhesive can serve as a suitable replacement for two organic adhesives that would have been used by past peoples – pine resin and hide glue – in modern experimental tests of prehistoric weaponry. We conducted a ballistics experiment and shot groups of stone-tipped arrows, each group hafted with one of the three adhesives, and assessed the haft bond failure rate. The modern thermoplastic adhesive was similar to that of the pine resin and significantly failed less often than the hide glue. We conclude that in some cases modern thermoplastic adhesive can be substituted for organic-based adhesives in experimental archaeology. Our results also show that hafting bond failure rate was significantly different between the pine resin and the hide glue, suggesting that prehistoric hunter-gatherers faced costs or benefits in selecting adhesives for hafting

Why invent the handle? Electromyography (EMG) and efficiency of use data investigating the prehistoric origin and selection of hafted stone knives

Abstract: For over 3 million years hominins held stone-cutting tools in the hand, gripping the portion of tool displaying a sharp cutting edge directly. During the late Middle Pleistocene human populations started to produce hafted composite knives, where the stone element displaying a sharp cutting edge was secured in a handle. Prevailing archaeological literature suggests that handles convey benefits to tool users by increasing cutting performance and reducing musculoskeletal stresses, yet to date these hypotheses remain largely untested. Here, we compare the cutting performance of hafted knives, ‘basic’ flake tools, and large bifacial tools during two standardized cutting tasks. Going further, we examine the comparative ergonomics of each tool type through electromyographic (EMG) analysis of nine upper limb muscles. Results suggest that knives (1) recruit muscles responsible for digit flexion (i.e. gripping) and in-hand manipulation relatively less than alternative stone tool types and (2) may convey functional performance benefits relative to unhafted stone tool alternatives when considered as a generalised cutting tool. Furthermore, our data indicate that knives facilitate greater muscle activity in the upper arm and forearm, potentially resulting in the application of greater cutting forces during tool use. Compared to unhafted prehistoric alternatives, hafted stone knives demonstrate increased ergonomic properties and some functional performance benefits. These factors would likely have contributed to the invention and widespread adoption of hafted stone knives during the late Middle Pleistocene

Miniaturization optimized weapon killing power during the social stress of late pre-contact North America (AD 600-1600)

Before Europeans arrived to Eastern North America, prehistoric, indigenous peoples experienced a number of changes that culminated in the development of sedentary, maize agricultural lifeways of varying complexity. Inherent to these lifeways were several triggers of social stress including population nucleation and increase, intergroup conflict (warfare), and increased territoriality. Here, we examine whether this period of social stress co-varied with deadlier weaponry, specifically, the design of the most commonly found prehistoric archery component in late pre-contact North America: triangular stone arrow tips (TSAT). The examination of modern metal or carbon projectiles, arrows, and arrowheads has demonstrated that smaller arrow tips penetrate deeper into a target than do larger ones. We first experimentally confirm that this relationship applies to arrow tips made from stone hafted onto shafts made from wood. We then statistically assess a large sample (n = 742) of late pre-contact TSAT and show that these specimens are extraordinarily small. Thus, by miniaturizing their arrow tips, prehistoric people in Eastern North America optimized their projectile weaponry for maximum penetration and killing power in warfare and hunting. Finally, we verify that these functional advantages were selected across environmental and cultural boundaries. Thus, while we cannot and should not rule out stochastic, production economizing, or non-adaptive cultural processes as an explanation for TSAT, overall our results are consistent with the hypothesis that broad, socially stressful demographic changes in late pre-contact Eastern North America resulted in the miniaturization–and augmented lethality–of stone tools across the region

Comparing the use of meat and clay during cutting and projectile research

Diverse disciplines investigate how muscular tissue (i.e. ‘meat’) responds to being cut and deformed, however, large-scale, empirically robust investigations into these matters are often impractical and expensive. Previous research has used clay as an alternative to meat. To establish whether clay is a reliable proxy for meat, we directly compare the two materials via a series of cutting and projectile tests. Results confirm that the two materials display distinct cutting mechanics, resistance to penetration and are not comparable. Under certain conditions clay can be used as an alternative to meat, although distinctions between the two may lead to experimental limitations

Search for new particles in events with energetic jets and large missing transverse momentum in proton-proton collisions at root s=13 TeV

A search is presented for new particles produced at the LHC in proton-proton collisions at root s = 13 TeV, using events with energetic jets and large missing transverse momentum. The analysis is based on a data sample corresponding to an integrated luminosity of 101 fb(-1), collected in 2017-2018 with the CMS detector. Machine learning techniques are used to define separate categories for events with narrow jets from initial-state radiation and events with large-radius jets consistent with a hadronic decay of a W or Z boson. A statistical combination is made with an earlier search based on a data sample of 36 fb(-1), collected in 2016. No significant excess of events is observed with respect to the standard model background expectation determined from control samples in data. The results are interpreted in terms of limits on the branching fraction of an invisible decay of the Higgs boson, as well as constraints on simplified models of dark matter, on first-generation scalar leptoquarks decaying to quarks and neutrinos, and on models with large extra dimensions. Several of the new limits, specifically for spin-1 dark matter mediators, pseudoscalar mediators, colored mediators, and leptoquarks, are the most restrictive to date.Peer reviewe

MUSiC : a model-unspecific search for new physics in proton-proton collisions at root s=13TeV

Results of the Model Unspecific Search in CMS (MUSiC), using proton-proton collision data recorded at the LHC at a centre-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 35.9 fb(-1), are presented. The MUSiC analysis searches for anomalies that could be signatures of physics beyond the standard model. The analysis is based on the comparison of observed data with the standard model prediction, as determined from simulation, in several hundred final states and multiple kinematic distributions. Events containing at least one electron or muon are classified based on their final state topology, and an automated search algorithm surveys the observed data for deviations from the prediction. The sensitivity of the search is validated using multiple methods. No significant deviations from the predictions have been observed. For a wide range of final state topologies, agreement is found between the data and the standard model simulation. This analysis complements dedicated search analyses by significantly expanding the range of final states covered using a model independent approach with the largest data set to date to probe phase space regions beyond the reach of previous general searches.Peer reviewe