In vivo assessment of a novel biodegradable ureteral stent

Purpose: To perform an in vivo assessment of a newly developed biodegradable ureteral stent (BUS) produced with natural-based polymers. Methods: The BUS is based on a patented technology combining the injection process with the use of supercritical fluid technology. The study was conducted at ICVS-University of Minho (Braga, Portugal) and a total of ten domestic pigs were used. In seven animals, the experimental BUS stent was inserted, whereas in the remaining a commercially available stent was used (6-Fr Biosoft(®) duo stents, Porges Coloplast, Denmark). Post-stenting intravenous pyelogram was used to evaluate the degree of hydronephrosis. The in vivo stent degradation was measured as a function of the weight loss. Moreover, the tensile properties of the BUS were tested during in vivo degradation. After maximum 10 days, animals were killed and necropsy was performed. Tissues were compared between the stented groups as well as between the non-stented contralateral ureters and stented ureters in each group. Biocompatibility was assessed by histopathological grading. Results: In all cases, the BUS was only visible during the first 24 h on X-ray, and in all cases, the BUS was completely degraded in urine after 10 days, as confirmed on necropsy. During the degradation process, the mechanical properties of the BUS decreased, while the commercial ureteral stents remained constant. At all time-points after stent insertion, the level of hydronephrosis was minimal. Overall, animals stented with BUS had an average grade of hydronephrosis which was lower compared to the controls. The BUS showed better pathological conditions, and hence better biocompatibility when compared with commercial stents. Conclusions: Notwithstanding the limitations of the present study, the in vivo testing of our novel natural origin polymer-based BUS suggests this device to feature homogeneous degradation, good urine drainage, and high biocompatibility. Next steps will be to increase its stability and to improve the radiopacity without compromising its degradation. Ultimately, clinical studies will be required to determine the safety and feasibility of its use in humans.FCT -Fuel Cell Technologies Program(POCI-01-0145-FEDER-007038)info:eu-repo/semantics/publishedVersio

Retropubic, laparoscopic and mini-laparoscopic radical prostatectomy : a prospective assessment of patient scar satisfaction

Published online: 26 October 2014PURPOSE: To compare patient scar satisfaction after retropubic, standard laparoscopic, mini-laparoscopic (ML) and open radical prostatectomy (RP). METHODS: Patients undergoing RP for a diagnosis of localized prostate cancer at a single academic hospital between September 2012 and December 2013 were enrolled in this prospective nonrandomized study. The patients were included in three study arms: open surgery, VLP and ML. A skin stapler was used for surgical wound closure in all cases. Demographic and main surgical outcomes, including perioperative complications, were analyzed. Surgical scar satisfaction was measured using the Patient and Observer Scar Assessment Questionnaire (POSAS) and the two Body Image Questionnaire (BIQ) scales, respectively, recorded at skin clips removal and either at 6 months after surgery. RESULTS: Overall, 32 patients were enrolled and completed the 6 month of follow-up. At clips removal, laparoscopic approaches offered better scar result than open surgery according to the POSAS. However, at 6 months, no differences were detected between VLP and open, whereas ML was still associated with a better scar outcome (p = 0.001). This finding was also confirmed by both BIQ scales, including the body image score (ML 9.8 ± 1.69, open 15.73 ± 3.47, VLP 13.27 ± 3.64; p = 0.001) and the cosmetic score (ML 16.6 ± 4.12, open 10 ± 1.9, LP 12.91 ± 3.59; p = 0.001). Small sample size and lack of randomization represent the main limitations of this study. CONCLUSIONS: ML RP offers a better cosmetic outcome when compared to both open and standard laparoscopic RP, representing a step toward minimal surgical scar. The impact of scar outcome on RP patients' quality of life remains to be determined

Effects of Wolves on Elk and Cattle Behaviors: Implications for Livestock Production and Wolf Conservation

BACKGROUND: In many areas, livestock are grazed within wolf (Canis lupus) range. Predation and harassment of livestock by wolves creates conflict and is a significant challenge for wolf conservation. Wild prey, such as elk (Cervus elaphus), perform anti-predator behaviors. Artificial selection of cattle (Bos taurus) might have resulted in attenuation or absence of anti-predator responses, or in erratic and inconsistent responses. Regardless, such responses might have implications on stress and fitness. METHODOLOGY/PRINCIPAL FINDINGS: We compared elk and cattle anti-predator responses to wolves in southwest Alberta, Canada within home ranges and livestock pastures, respectively. We deployed satellite- and GPS-telemetry collars on wolves, elk, and cattle (n = 16, 10 and 78, respectively) and measured seven prey response variables during periods of wolf presence and absence (speed, path sinuosity, time spent head-up, distance to neighboring animals, terrain ruggedness, slope and distance to forest). During independent periods of wolf presence (n = 72), individual elk increased path sinuosity (Z = -2.720, P = 0.007) and used more rugged terrain (Z = -2.856, P = 0.004) and steeper slopes (Z = -3.065, P = 0.002). For cattle, individual as well as group behavioral analyses were feasible and these indicated increased path sinuosity (Z = -2.720, P = 0.007) and decreased distance to neighbors (Z = -2.551, P = 0.011). In addition, cattle groups showed a number of behavioral changes concomitant to wolf visits, with variable direction in changes. CONCLUSIONS/SIGNIFICANCE: Our results suggest both elk and cattle modify their behavior in relation to wolf presence, with potential energetic costs. Our study does not allow evaluating the efficacy of anti-predator behaviors, but indicates that artificial selection did not result in their absence in cattle. The costs of wolf predation on livestock are often compensated considering just the market value of the animal killed. However, society might consider refunding some additional costs (e.g., weight loss and reduced reproduction) that might be associated with the changes in cattle behaviors that we documented

Oral maxillofacial neoplasms in an East African population a 10 year retrospective study of 1863 cases using histopathological reports

<p>Abstract</p> <p>Background</p> <p>Neoplasms of the oral maxillofacial area are an interesting entity characterized by differences in nomenclature and classification at different centers.</p> <p>We report neoplastic histopathological diagnoses seen at the departments of oral maxillofacial surgery of Muhimbili and Mulago referral hospitals in Tanzania and Uganda respectively over a 10-year period.</p> <p>Methods</p> <p>We retrieved histopathological reports archived at the departments of oral maxillofacial surgery of Muhimbili and Mulago referral hospitals in Tanzania and Uganda respectively over a 10-year period from June 1989–July 1999.</p> <p>Results</p> <p>In the period between June 1989 and July 1999, 565 and 1298 neoplastic oro-facial cases were retrieved of which 284 (50.53%) and 967 (74.54%) were malignant neoplasms at Muhimbili and Mulago hospitals respectively. Overall 67.28% of the diagnoses recorded were malignant with Kaposi's sarcoma (21.98%), Burkiits lymphoma (20.45%), and squamous cell carcinoma (15.22%) dominating that group while ameloblastoma (9.23%), fibromas (7.3%) and pleomorphic adenoma (4.95%) dominated the benign group.</p> <p>The high frequency of malignancies could be due to inclusion criteria and the clinical practice of selective histopathology investigation. However, it may also be due to higher chances of referrals in case of malignancies.</p> <p>Conclusion</p> <p>There is need to reexamine the slides in these two centers in order to bring them in line with the most recent WHO classification so as to allow for comparison with reports from else where.</p

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Are isomeric alkenes used in species recognition among neo-tropical stingless bees (Melipona spp)

The majority of our understanding of the role of cuticular hydrocarbons (CHC) in recognition is based largely on temperate ant species and honey bees. The stingless bees remain relatively poorly studied, despite being the largest group of eusocial bees, comprising more than 400 species in some 60 genera. The Meliponini and Apini diverged between 80-130 Myr B.P. so the evolutionary trajectories that shaped the chemical communication systems in ants, honeybees and stingless bees may be very different. Therefore, the main aim of this study was to study if a unique species CHC signal existed in Neotropical stingless bees, as shown for many temperate species, and if so what compounds are involved. This was achieved by collecting CHC data from 24 colonies belonging to six species of Melipona from North-eastern Brazil and comparing this new data with all previously published CHC studies on Melipona. We found that each of the eleven Melipona species studied so far each produced a unique species CHC signal based around their alkene isomer production. A remarkable number of alkene isomers, up to 25 in M. asilvai, indicated the diversification of alkene positional isomers among the stingless bees. The only other group to have really diversified in alkene isomer production are the primitively eusocial Bumblebees (Bombus spp), which are the sister group of the stingless bees. Furthermore, among the eleven Neotropical Melipona species we could detect no effect of the environment on the proportion of alkane production as has been suggested for some other species