Depth model building by constrained magnetotelluric inversion

In this paper we describe an approach aimed at integrating seismic and magnetotelluric data in a complex geological setting, characterised by thrust structures, in Southern Apennine, Southern Italy. Seismic data were collected by the «Global Offset» technique that is designed to record hight fold data in a wide range of offsets, without losing the benefit of near vertical reflection seismic. First arrivals picked from short to long offsets and the main reflections were inverted in order to produce a tomographic velocity-interface model. It was converted into a resistivity section applying an empirical relationship, obtained by well logs, between resistivity and velocity. That section was used as a reliable reference model for 2D inversion of magnetotelluric data collected along a parallel section very close to the seismic profile. The process was iterative and interactive and was aimed at producing consistent velocity and resistivity sections, honouring seismic and MT data set. The final MT model fits very well the observed apparent resistivity and phase, reproduces the main geological trends and its constrained by a well drilled close to the line

Virtual Surgical Reduction in Atrophic Edentulous Mandible Fractures: A Novel Approach Based on “in House” Digital Work-Flow

Featured Application: Virtual Surgical Planning in Cranio-Facial Traumatology. Atrophic edentulous mandible fractures are a challenge for maxillo-facial surgeons because of low vascularization, low bone regeneration, and lack of occlusion. Whereas occlusion is the main guide in the reduction of mandibular fractures, the aim of our study is to show the advantages of using virtual surgical planning (VSP) in surgery when the occlusal guide is absent. This work is a prospective study that shows the in-house digital workflow for the management of these fractures in the Maxillo-Facial Surgery Unit of Federico II University Hospital of Naples. Four patients who satisfied the criteria were included in the study. For each patient, the same defined CAD/CAM-based was applied. The workflow followed four steps: (1) bone segmentation and virtual reduction of fracture fragments; (2) three-dimensional printing of virtually reduced mandible and modelling of 2.4 reconstruction plate on printed resin model; (3) surgery aided by the pre-formed plate; (4) digital and clinical outcomes analysis. In the last step, a distance colour map was conducted to compare the virtual planning and postoperative CT outcome. In all cases, the discrepancies values between the two images were lower than 1.5 mm, and good clinical outcomes in terms of facial symmetry, absence of sensory disturbance, and possibility of prosthetic rehabilitation were obtained. In conclusion, the VSP, with our in-house workflow brings benefits in the management of atrophic edentulous mandible fractures in terms of the high accuracy of bone repositioning

Surgical management of pleomorphic adenoma of parotid gland in elderly patients: Role of morphological features.

The neoplasms of the salivary glands account for 2% of head and neck tumors and the most common form is the Pleomorphic Adenoma (PA). Parotid gland is affected from 80% to 90% of cases. In elderly this tumors occurs mostly in females. These benign tumors are composed of epithelial and myoepithelial cells that are arranged with various morphological patterns and subtypes. The classification of these tumors is also based on the amount and nature of the stroma. In literature there is a almost complete consensus that, in the major salivary glands, PAs are enclosed by a layer of fibrous tissue often called "capsule" but there is disagreement about the form, extention and thickness of this layer. The treatment is surgical and there are two main different surgical approaches: an enucleation (local dissection) or so-called subtotal superficial parotidectomy and lateral or superficial total parotidectomy. Histopathological characteristics of PAs especially of capsular alterations such as thin capsule areas, capsule-free regions, capsule penetration, satellite nodules and pseudopodia in the different subtypes are important for the choice of surgical treatment and the first explanation for tumor recurrence. In our study we describe a morphological features of 84 cases of pleomorphic adenoma of parotid gland from elderly patients treated by a surgical "enucleation like" method called nucleoresection

Postoperative Management of Zygomatic Arch Fractures: In-House Rapid Prototyping System for the Manufacture of Protective Facial Shields

Zygomatic fractures account for 10% to 15% of all facial fractures. The surgical management of isolated zygomatic arch fractures usually requires open reduction treatment without fixation through an intraoral access. Therefore, the main problem in the non-fixed treatment of zygomatic arch fractures is related to the difficulty in obtaining a stable reduction for a period long enough to guarantee the physiological bone healing process. We propose an innovative "in-house" rapid prototyping (RP) protocol for the 3D-zygoma mask manufacture of a patient-specific protective device to apply after zygomatic arch fracture reduction. Our study includes 16 consecutive patients who underwent surgical open reduction for an isolated zygoma fracture without fixation between January 2017 and February 2018. The patients received regular postoperative checks at weeks 1 and 2. Before the device was removed, a multiple choice questionnaire was administered to measure the degree of wearability of the mask. The estimated cost of the production is around &OV0556;5 per case and the construction time is around 90 minutes. Based on the encouraging results, obtained in our experience, we hope that other studies can be conducted to confirm our procedure and improve its functionality in the field of facial trauma

Application of AI in cardiovascular multimodality imaging

Technical advances in artificial intelligence (AI) in cardiac imaging are rapidly improving the reproducibility of this approach and the possibility to reduce time necessary to generate a report. In cardiac computed tomography angiography (CCTA) the main application of AI in clinical practice is focused on detection of stenosis, characterization of coronary plaques, and detection of myocardial ischemia. In cardiac magnetic resonance (CMR) the application of AI is focused on post-processing and particularly on the segmentation of cardiac chambers during late gadolinium enhancement. In echocardiography, the application of AI is focused on segmentation of cardiac chambers and is helpful for valvular function and wall motion abnormalities. The common thread represented by all of these techniques aims to shorten the time of interpretation without loss of information compared to the standard approach. In this review we provide an overview of AI applications in multimodality cardiac imaging

A New Academic Quality at Work Tool (AQ@workT) to Assess the Quality of Life at Work in the Italian Academic Context

The present study provides evidence for a valid and reliable tool, the Academic Quality at Work Tool (AQ@workT), to investigate the quality of life at work in academics within the Italian university sector. The AQ@workT was developed by the QoL@Work research team, namely a group of expert academics in the field of work and organizational psychology affiliated with the Italian Association of Psychologists. The tool is grounded in the job demands-resources model and its psychometric properties were assessed in three studies comprising a wide sample of lecturers, researchers, and professors: a pilot study (N = 120), a calibration study (N = 1084), and a validation study (N = 1481). Reliability and content, construct, and nomological validity were supported, as well as measurement invariance across work role (researchers, associate professors, and full professors) and gender. Evidence from the present study shows that the AQ@workT represents a useful and reliable tool to assist university management to enhance quality of life, to manage work-related stress, and to mitigate the potential for harm to academics, particularly during a pandemic. Future studies, such as longitudinal tests of the AQ@workT, should test predictive validity among the variables in the tool

Molecular analysis of the apoptotic effects of BPA in acute myeloid leukemia cells

<p>Abstract</p> <p>Background:</p> <p>BPA (bisphenol A or 2,2-bis(4-hydroxy-phenol)propane) is present in the manufacture of polycarbonate plastic and epoxy resins, which can be used in impact-resistant safety equipment and baby bottles, as protective coatings inside metal food containers, and as composites and sealants in dentistry. Recently, attention has focused on the estrogen-like and carcinogenic adverse effects of BPA. Thus, it is necessary to investigate the cytotoxicity and apoptosis-inducing activity of this compound.</p> <p>Methods:</p> <p>Cell cycle, apoptosis and differentiation analyses; western blots.</p> <p>Results:</p> <p>BPA is able to induce cell cycle arrest and apoptosis in three different acute myeloid leukemias. Although some granulocytic differentiation concomitantly occurred in NB4 cells upon BPA treatment, the major action was the induction of apoptosis. BPA mediated apoptosis was caspase dependent and occurred by activation of extrinsic and intrinsic cell death pathways modulating both FAS and TRAIL and by inducing BAD phosphorylation in NB4 cells. Finally, also non genomic actions such as the early decrease of both ERK and AKT phosphorylation were induced by BPA thus indicating that a complex intersection of regulations occur for the apoptotic action of BPA.</p> <p>Conclusion:</p> <p>BPA is able to induce apoptosis in leukemia cells via caspase activation and involvement of both intrinsic and extrinsic pathways of apoptosis.</p