Influence Of A Cobalt-chromium Metal Framework On Surface Roughness And Knoop Hardness Of Visible Light-polymerized Acrylic Resins

Although visible light-polymerized acrylic resins have been used in removable partial dentures, it is not clear whether the presence of a metal framework could interfere with their polymerization, by possibly reflecting the light and affecting important properties, such as roughness and hardness, which would consequently increase biofilm accumulation. The aim of this study was to compare the roughness and Knoop hardness of a visible light-polymerized acrylic resin and to compare these values to those of water-bath- and microwave-polymerized resins, in the presence of a metal framework. Thirty-six specimens measuring 30.0 x 4.0 ± 0.5 mm of a microwave- (Onda Cryl), a visible light- (Triad) and a water-bath-polymerized (Clássico) (control) acrylic resins containing a cobalt-chromium metal bar were prepared. After processing, specimens were ground with 360 to 1000-grit abrasive papers in a polishing machine, followed by polishing with cloths and 1-μm diamond particle suspension. Roughness was evaluated using a profilometer (Surfcorder SE 1700) and Knoop hardness (Kg/mm 2) was assayed using a microhardness tester (Shimadzu HMV 2000) at distances of 50, 100, 200, 400 and 800 μm from the metal bar. Roughness and Knoop hardness means were submitted to two-way ANOVA and compared by Tukey and Kruskal Wallis tests at a 5% significance level Statistically significant differences were found (p<0.05) for roughness and Knoop hardness, with light-polymerized resin presenting the highest values (Ra = 0.11 μm and hardness between 20.2 and 21.4 Kg/mm 2). Knoop values at different distances from the metal bar did not differ statistically (p>0.05). Within the limitations of this in vitro study, it was concluded that the presence of metal did not influence roughness and hardness values of any of the tested acrylic resins.143208212Anusavice, K.J., (2003) Philip's Science of Dental Materials. 11 th Ed., p. 96. , 11 St. Louis: Elsevier ScienceBollen, C.M.L., Lambrechts, P., Quirynen, M., Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature (1997) Dent Mater, 13 (4), pp. 258-269Borchers, L., Tavassol, F., Tschernitschek, H., Surface quality achieved by polishing and by varnishing of temporary crown and fixed partial denture resins (1999) J Prosthet Dent, 82 (5), pp. 550-556Braun, K.O., Del Bel Cury, A.A., Cury, J.A., Use of microwave energy for processing acrylic resin near metal (1998) Braz Oral Res, 12 (2), pp. 173-180Curtis, D.A., Eggleston, T.L., Marshall, S.J., Watanabe, L.G., Shear bond strength of visible-light-cured resin relative to heat-cured resin (1989) Dental Mater, 5 (7), pp. 314-318De Clerck, J.P., Microwave polymerization of acrylic resins used in dental prosthesis (1987) J Prosthet Dent, 57 (5), pp. 650-658Khan, Z., Von Fraunhofer, J.A., Razavi, R., The staining characteristics, transverse strength, and microhardness of a visible light-cured denture base material (1987) J Prosthet Dent, 57 (3), pp. 384-386Levin, B., Sanders, J.L., Reitz, P.V., The use of microwave energy for processing acrylic resins (1989) J Prosthet Dent, 61 (3), pp. 381-383Ogle, R.E., Sorensen, S.E., Lewis, E.A., A new visible light-cured resin system applied to removable prosthodontics (1986) J Prosthet Dent, 56 (4), pp. 497-506Quirynen, M., Cml, B., Willems, G., Van Steenberghe, D., Comparison of surface characteristics of six commercially pure titanium abutments (1994) JOMI, 9 (1), pp. 71-76Reitz, P.V., Sanders, J.L., Levin, B., The curing of denture acrylic resins by microwave energy. Physical properties (1985) Quintessence Int, 6 (8), pp. 547-551Rodrigues Garcia, R.C.M., Souza Jr., J.A., Rached, R.N., Del Bel Cury, A.A., Effect of denture cleansers on the surface roughness and hardness of a microwave-cured acrylic resin and dental alloys (2004) J Prosthodont, 13 (3), pp. 1-6Rueggeberg, F.A., Goughman, W.F., Curtis Jr., J.W., Effect of light intensity and exposure duration on cure of resin composite (1994) Oper Dent, 19 (1), pp. 26-32Truong, V.T., Thomasz, F.G., Comparison of denture acrylic resins cured by boiling water and microwave energy (1988) Aust Dent J, 33 (3), pp. 201-204Ulusoy, M., Ulusoy, N., Aydin, A.K., An evaluation of polishing technique on surface roughness of acrylic rsins (1986) J Prosthetic Dent, 56 (1), pp. 107-11

Pesquisa anatômica da glândula pineal em capivaras (Hydrochoerus hydrochoeris)

A glândula pineal foi estudada macro e microscopicamente em 19 capivaras (Hydrochoerus hydrochoeris) jovens e adultas, fêmeas e machos. A pineal, presente em todos os espécimes, estava localizada entre o cérebro e o cerebelo, e era formada por uma base com dois pedúnculos, uma haste e um ápice. A glândula localizava-se no teto do III ventrículo, próximo ao colículorostral, mostrando-se esbranquiçada ou acastanhada. O ápice continha uma cavidade. O comprimento médio da glândula na base foi de 1,3 mm; 1,2 mm; 2,0 mm na sua haste e ápice respectivamente. Revestida por uma cápsula de tecido conjuntivo contendo, pelo menos em parte do seu contorno, vasos sangüíneos, o parênquima pineal mostrou pinealócitos com grânulosnucleares e células intersticiais.The pineal gland was studied macro-and microscopically in 19 adult and young capybaras (Hydrochoerus hydrochoeris) 13 females and 6 males. Pineal gland was present in all specimens between the cerebrum and the cerebellum and was formed by a base with two peduncles, a stem and an apex. The gland was in the roof of the III ventricle, next to the rostral coliculi, eitherwhish or brownish.The apex contained a cavity. Pineal gland was 2.2 cm long, and dimensions of the base, stem and apex were 1.3 mm, 1.2 mm and 2.0 mm respectively. The connective tissue capsule at least in part, contained blood vessels. Pineal parenchyma exhibited pinealocytes, with nuclear and interstitial cells

Recomendações Para O Tratamento Da Crise Migranosa - Um Consenso Brasileiro

In this article, a group of experts in headache management of the Brazilian Headache Society developed through a consensus strategic measurements to treat a migraine attack in both the child and the adult. Particular emphasis was laid on the treatment of migraine in women, including at pregnancy, lactation and perimenstrual period. © 2016, Associacao Arquivos de Neuro-Psiquiatria. All rights reserved.74326227

Soil biochemistry and microbial activity in vineyards under conventional and organic management at Northeast Brazil.

The São Francisco Submedium Valley is located at the Brazilian semiarid region and is an important center for irrigated fruit growing. This region is responsible for 97% of the national exportation of table grapes, including seedless grapes. Based on the fact that orgThe São Francisco Submedium Valley is located at the Brazilian semiarid region and is an important center for irrigated fruit growing. This region is responsible for 97% of the national exportation of table grapes, including seedless grapes. Based on the fact that organic fertilization can improve soil quality, we compared the effects of conventional and organic soil management on microbial activity and mycorrhization of seedless grape crops. We measured glomerospores number, most probable number (MPN) of propagules, richness of arbuscular mycorrhizal fungi (AMF) species, AMF root colonization, EE-BRSP production, carbon microbial biomass (C-MB), microbial respiration, fluorescein diacetate hydrolytic activity (FDA) and metabolic coefficient (qCO2). The organic management led to an increase in all variables with the exception of EE-BRSP and qCO2. Mycorrhizal colonization increased from 4.7% in conventional crops to 15.9% in organic crops. Spore number ranged from 4.1 to 12.4 per 50 g-1 soil in both management systems. The most probable number of AMF propagules increased from 79 cm-3 soil in the conventional system to 110 cm-3 soil in the organic system. Microbial carbon, CO2 emission, and FDA activity were increased by 100 to 200% in the organic crop. Thirteen species of AMF were identified, the majority in the organic cultivation system. Acaulospora excavata, Entrophospora infrequens, Glomus sp.3 and Scutellospora sp. were found only in the organically managed crop. S. gregaria was found only in the conventional crop. Organically managed vineyards increased mycorrhization and general soil microbial activity

Spectroscopy studies of 4H-SiC

Calculations of the total dielectric functions and the optical bandgap energy (OBGE) of 4HSiC were performed by the full-potential linear muffin-tin-orbital method. The results are compared to spectroscopic ellipsometry dielectric measurements agreeing closely over in a wide range of energies. The obtained theoretical value of the (OBGE) agrees very closely with the measured ones obtained by transmission and photoacoustic spectroscopies at room temperature performed on 470 µm thick wafer and a 25 µm thick homoepitaxial layer of 4H-SiC samples grown (n-type, Siface) by hot wall CVD

The Fluorescence Detector of the Pierre Auger Observatory

The Pierre Auger Observatory is a hybrid detector for ultra-high energy cosmic rays. It combines a surface array to measure secondary particles at ground level together with a fluorescence detector to measure the development of air showers in the atmosphere above the array. The fluorescence detector comprises 24 large telescopes specialized for measuring the nitrogen fluorescence caused by charged particles of cosmic ray air showers. In this paper we describe the components of the fluorescence detector including its optical system, the design of the camera, the electronics, and the systems for relative and absolute calibration. We also discuss the operation and the monitoring of the detector. Finally, we evaluate the detector performance and precision of shower reconstructions.Comment: 53 pages. Submitted to Nuclear Instruments and Methods in Physics Research Section

Update on the correlation of the highest energy cosmic rays with nearby extragalactic matter

Data collected by the Pierre Auger Observatory through 31 August 2007 showed evidence for anisotropy in the arrival directions of cosmic rays above the Greisen-Zatsepin-Kuz'min energy threshold, \nobreak{$6\times 10^{19}$eV}. The anisotropy was measured by the fraction of arrival directions that are less than $3.1^\circ$ from the position of an active galactic nucleus within 75 Mpc (using the V\'eron-Cetty and V\'eron $12^{\rm th}$ catalog). An updated measurement of this fraction is reported here using the arrival directions of cosmic rays recorded above the same energy threshold through 31 December 2009. The number of arrival directions has increased from 27 to 69, allowing a more precise measurement. The correlating fraction is $(38^{+7}_{-6})$, compared with $21$ expected for isotropic cosmic rays. This is down from the early estimate of $(69^{+11}_{-13})$. The enlarged set of arrival directions is examined also in relation to other populations of nearby extragalactic objects: galaxies in the 2 Microns All Sky Survey and active galactic nuclei detected in hard X-rays by the Swift Burst Alert Telescope. A celestial region around the position of the radiogalaxy Cen A has the largest excess of arrival directions relative to isotropic expectations. The 2-point autocorrelation function is shown for the enlarged set of arrival directions and compared to the isotropic expectation.Comment: Accepted for publication in Astroparticle Physics on 31 August 201

Advanced functionality for radio analysis in the Offline software framework of the Pierre Auger Observatory

The advent of the Auger Engineering Radio Array (AERA) necessitates the development of a powerful framework for the analysis of radio measurements of cosmic ray air showers. As AERA performs "radio-hybrid" measurements of air shower radio emission in coincidence with the surface particle detectors and fluorescence telescopes of the Pierre Auger Observatory, the radio analysis functionality had to be incorporated in the existing hybrid analysis solutions for fluoresence and surface detector data. This goal has been achieved in a natural way by extending the existing Auger Offline software framework with radio functionality. In this article, we lay out the design, highlights and features of the radio extension implemented in the Auger Offline framework. Its functionality has achieved a high degree of sophistication and offers advanced features such as vectorial reconstruction of the electric field, advanced signal processing algorithms, a transparent and efficient handling of FFTs, a very detailed simulation of detector effects, and the read-in of multiple data formats including data from various radio simulation codes. The source code of this radio functionality can be made available to interested parties on request.Comment: accepted for publication in NIM A, 13 pages, minor corrections to author list and references in v