Architectural mismatch tolerance

The integrity of complex software systems built from existing components is becoming more dependent on the integrity of the mechanisms used to interconnect these components and, in particular, on the ability of these mechanisms to cope with architectural mismatches that might exist between components. There is a need to detect and handle (i.e. to tolerate) architectural mismatches during runtime because in the majority of practical situations it is impossible to localize and correct all such mismatches during development time. When developing complex software systems, the problem is not only to identify the appropriate components, but also to make sure that these components are interconnected in a way that allows mismatches to be tolerated. The resulting architectural solution should be a system based on the existing components, which are independent in their nature, but are able to interact in well-understood ways. To find such a solution we apply general principles of fault tolerance to dealing with arch itectural mismatche

DOES AEROBIC EXERCISE TRAINING PROMOTE CHANGES IN STRUCTURAL AND BIOMECHANICAL PROPERTIES OF THE TENDONS IN EXPERIMENTAL ANIMALS? A SYSTEMATIC REVIEW

To develop a systematic review to evaluate, through the best scientific evidence available, the effectiveness of aerobic exercise in improving the biomechanical characteristics of tendons in experimental animals. Two independent assessors conducted a systematic search in the databases Medline/PUBMED and Lilacs/BIREME, using the following descriptors of Mesh in animal models. The ultimate load of traction and the elastic modulus tendon were used as primary outcomes and transverse section area, ultimate stress and tendon strain as secondary outcomes. The assessment of risk of bias in the studies was carried out using the following methodological components: light/dark cycle, temperature, nutrition, housing, research undertaken in conjunction with an ethics committee, randomization, adaptation of the animals to the training and preparation for the mechanical test. Eight studies, comprising 384 animals, were selected; it was not possible to combine them into one meta-analysis due to the heterogeneity of the samples. There was a trend to increasing ultimate load without changes in the other outcomes studied. Only one study met more than 80% of the quality criteria. Physical training performed in a structured way with imposition of overloads seems to be able to promote changes in tendon structure of experimental models by increasing the ultimate load supported. However, the results of the influence of exercise on the elastic modulus parameters, strain, transverse section area and ultimate stress, remain controversial and inconclusive. Such a conclusion must be evaluated with reservation as there was low methodological control in the studies included in this review

Measurements of long-range near-side angular correlations in sNN=5\sqrt{s_{\text{NN}}}=5TeV proton-lead collisions in the forward region

Two-particle angular correlations are studied in proton-lead collisions at a nucleon-nucleon centre-of-mass energy of $\sqrt{s_{\text{NN}}}=5$TeV, collected with the LHCb detector at the LHC. The analysis is based on data recorded in two beam configurations, in which either the direction of the proton or that of the lead ion is analysed. The correlations are measured in the laboratory system as a function of relative pseudorapidity, $\Delta\eta$, and relative azimuthal angle, $\Delta\phi$, for events in different classes of event activity and for different bins of particle transverse momentum. In high-activity events a long-range correlation on the near side, $\Delta\phi \approx 0$, is observed in the pseudorapidity range $2.0<\eta<4.9$. This measurement of long-range correlations on the near side in proton-lead collisions extends previous observations into the forward region up to $\eta=4.9$. The correlation increases with growing event activity and is found to be more pronounced in the direction of the lead beam. However, the correlation in the direction of the lead and proton beams are found to be compatible when comparing events with similar absolute activity in the direction analysed.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-040.htm

Study of the production of Λb0\Lambda_b^0 and B‾0\overline{B}^0 hadrons in pppp collisions and first measurement of the Λb0→J/ψpK−\Lambda_b^0\rightarrow J/\psi pK^- branching fraction

The product of the $\Lambda_b^0$ ($\overline{B}^0$) differential production cross-section and the branching fraction of the decay $\Lambda_b^0\rightarrow J/\psi pK^-$ ($\overline{B}^0\rightarrow J/\psi\overline{K}^*(892)^0$) is measured as a function of the beauty hadron transverse momentum, $p_{\rm T}$, and rapidity, $y$. The kinematic region of the measurements is $p_{\rm T}<20~{\rm GeV}/c$ and $2.0<y<4.5$. The measurements use a data sample corresponding to an integrated luminosity of $3~{\rm fb}^{-1}$ collected by the LHCb detector in $pp$ collisions at centre-of-mass energies $\sqrt{s}=7~{\rm TeV}$ in 2011 and $\sqrt{s}=8~{\rm TeV}$ in 2012. Based on previous LHCb results of the fragmentation fraction ratio, $f_{\Lambda_B^0}/f_d$, the branching fraction of the decay $\Lambda_b^0\rightarrow J/\psi pK^-$ is measured to be \begin{equation*} \mathcal{B}(\Lambda_b^0\rightarrow J/\psi pK^-)= (3.17\pm0.04\pm0.07\pm0.34^{+0.45}_{-0.28})\times10^{-4}, \end{equation*} where the first uncertainty is statistical, the second is systematic, the third is due to the uncertainty on the branching fraction of the decay $\overline{B}^0\rightarrow J/\psi\overline{K}^*(892)^0$, and the fourth is due to the knowledge of $f_{\Lambda_b^0}/f_d$. The sum of the asymmetries in the production and decay between $\Lambda_b^0$ and $\overline{\Lambda}_b^0$ is also measured as a function of $p_{\rm T}$ and $y$. The previously published branching fraction of $\Lambda_b^0\rightarrow J/\psi p\pi^-$, relative to that of $\Lambda_b^0\rightarrow J/\psi pK^-$, is updated. The branching fractions of $\Lambda_b^0\rightarrow P_c^+(\rightarrow J/\psi p)K^-$ are determined.Comment: 29 pages, 19figures. All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-032.htm

Evidence for the strangeness-changing weak decay Ξb−→Λb0π−\Xi_b^-\to\Lambda_b^0\pi^-

Using a $pp$ collision data sample corresponding to an integrated luminosity of 3.0~fb$^{-1}$, collected by the LHCb detector, we present the first search for the strangeness-changing weak decay $\Xi_b^-\to\Lambda_b^0\pi^-$. No $b$ hadron decay of this type has been seen before. A signal for this decay, corresponding to a significance of 3.2 standard deviations, is reported. The relative rate is measured to be ${{f_{\Xi_b^-}}\over{f_{\Lambda_b^0}}}{\cal{B}}(\Xi_b^-\to\Lambda_b^0\pi^-) = (5.7\pm1.8^{+0.8}_{-0.9})\times10^{-4}$, where $f_{\Xi_b^-}$ and $f_{\Lambda_b^0}$ are the $b\to\Xi_b^-$ and $b\to\Lambda_b^0$ fragmentation fractions, and ${\cal{B}}(\Xi_b^-\to\Lambda_b^0\pi^-)$ is the branching fraction. Assuming $f_{\Xi_b^-}/f_{\Lambda_b^0}$ is bounded between 0.1 and 0.3, the branching fraction ${\cal{B}}(\Xi_b^-\to\Lambda_b^0\pi^-)$ would lie in the range from $(0.57\pm0.21)\%$ to $(0.19\pm0.07)\%$.Comment: 7 pages, 2 figures, All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-047.htm

BB flavour tagging using charm decays at the LHCb experiment

An algorithm is described for tagging the flavour content at production of neutral $B$ mesons in the LHCb experiment. The algorithm exploits the correlation of the flavour of a $B$ meson with the charge of a reconstructed secondary charm hadron from the decay of the other $b$ hadron produced in the proton-proton collision. Charm hadron candidates are identified in a number of fully or partially reconstructed Cabibbo-favoured decay modes. The algorithm is calibrated on the self-tagged decay modes $B^+ \to J/\psi \, K^+$ and $B^0 \to J/\psi \, K^{*0}$ using $3.0\mathrm{\,fb}^{-1}$ of data collected by the LHCb experiment at $pp$ centre-of-mass energies of $7\mathrm{\,TeV}$ and $8\mathrm{\,TeV}$. Its tagging power on these samples of $B \to J/\psi \, X$ decays is $(0.30 \pm 0.01 \pm 0.01) \%$.Comment: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-027.htm

Phenotypic, additive genetic and environment correlations of maize landraces populations in family farm systems

Knowledge of the association between characters is very important in the genetic breeding programs, but there is limited information about correlations between traits in maize landraces in the current literature. The objectives of this study were to estimate phenotypic, additive genetic and environment correlations among traits in maize landraces, which were cultivated in family farm systems, in order to guide the participatory breeding on maize landraces. Between 294 and 400 half-sib progenies from the six populations were evaluated, subdivided in triple 7X7 and 10X10 lattice design, respectively, with single row plots of 4 m long and spaced 1.00 × 0.20 m. Estimates of correlation coefficients are reported for nine traits: grain yield (GY), relation grain weight per ear weight (GE), ears per plant (EP), days to flower (DF), plant height (PH), ear height (EH), percentage of root loding (%L), percentage of stalk loding (%BS) and percentage of damaged ears (%DE). A high number of additive genetic correlation (rA) was obtained between grain yield and the other traits, in maize landraces populations, cycles and locations. For grain yield, the highest averages of the rA estimate were with EP (0.67), GE (0.47) and %DE (-0.63). In contrast to the current published researches, negative correlations between grain yield and days to flower were observed.O conhecimento da associação entre caracteres é de grande importância nos programas de melhoramento genético, contudo a literatura apresenta limitadas informações sobre correlações em populações de milho crioulo. Os objetivos deste estudo foram estimar correlações fenotípicas, genéticas aditivas e ambientais entre caracteres de populações de milho crioulo, cultivados em sistemas de agricultura familiar, para orientar o programa de melhoramento genético participativo. Entre 294 e 400 de progênies de meios-irmãos de seis populações, foram avaliadas em látices triplos 7X7 e 10X10, respectivamente, com parcelas de 4 m de comprimento e espaçadas 1,00 × 0,20 m. Os coeficientes de correlações foram estimados para nove características: produtividade de grãos total (GY), relação peso de grãos por peso de espiga (GE), nº de espigas por planta (EP), nº de dias do florescimento (DF), altura da planta (PH), altura espiga (EH), porcentagem de acamamento (%L), porcentagem de colmos quebrados (%BS) e porcentagem de espigas danificadas (%DE). Houve um alto número de correlação genética aditiva (rA) entre produtividade de grãos e as demais características, nas populações de milho crioulo, ciclos e locais. As maiores médias das estimativas rA para o produtividade de grãos foram com EP (0,67), GE (0,47) e DE% (-0,63). Diferentemente dos trabalhos publicados, foram observadas correlações negativas entre produtividade de grãos e dias para florescimento