nonlinear model predictive control strategy for steam turbine rotor stress

Abstract The paper proposes a Nonlinear Model Predictive Control strategy for the control of steam turbines rotor thermal stresses, which exploits the approximation of the turbine rotor as an infinite cylinder subjected to external convection. The Nonlinear Model Predictive Control allows optimizing the control strategy in the long term, by significantly reducing the machine start-up time during the power up ramp. This study proposes two different control strategies: the former one is based on the control of the Heat Transfer Coefficient, correlated to the inlet valve stroke. The latter one is based on the control of Heat Transfer Coefficient and the boiler steam temperature reference. Both strategies achieve good results in shortening the start-up time. The overall approach is validated and currently under development on Programmable Logic Controller platforms to the aim of code optimization

Una procedura per la stima delle tensioni termo-meccaniche in alberi intagliati

Nei componenti meccanici dalla geometria complessa l’analisi delle tensioni termomeccaniche è comunemente effettuata tramite FEM. Questa analisi risulta onerosa a livello computazionale e la validità dei risultati è limitata ai casi specifici considerati. Per tali motivi può risultare utile un approccio analitico, seppure semplificato, che sia in grado di fornire una ragionevole stima delle tensioni termo-meccaniche per classi di geometrie simili. Nel presente lavoro, è stato considerato il caso di alberi intagliati; in particolare, si è preso a riferimento un albero a due diametri soggetto a convezione con fluido sulla superficie esterna. Ci si è quindi proposti di verificare se fosse possibile definire un fattore di concentrazione delle tensioni termo-meccaniche per stimare lo stato di tensione nella zona di raccordo a partire dalla soluzione numerica nota per il cilindro infinito. È stato verificato che è possibile esprimere tale coefficiente tramite il rapporto tra i picchi delle tensioni misurate durante il transitorio nella zona di intaglio ed in quella cilindrica. Nel lavoro viene inoltre discusso l’effetto delle dimensioni del componente sullo stato di sollecitazione, tramite il numero di Biot. Nel caso delle tensioni termomeccaniche, infatti, l’effetto della concentrazione di tensione non è riconducibile ad un semplice problema di forma

Multicentre observational study on multisystem inflammatory syndrome related to COVID-19 in Argentina

Background: The impact of the pediatric inflammatory multisystem syndrome temporally associated with SARS-CoV-2 (PIMS-TS) in low- and middle-income countries remains poorly understood. Our aim was to understand the characteristics and outcomes of PIMS-TS in Argentina. Methods: This observational, prospective, and retrospective multicenter study enrolled patients younger than 18 years-old manifesting PIMS-TS, Kawasaki disease (KD) or Kawasaki shock syndrome (KSS) between March 2020 and May 2021. Patients were followed-up until hospital discharge or death (one case). The primary outcome was pediatric intensive care unit (PICU) admission. Multiple logistic regression was used to identify variables predicting PICU admission. Results: Eighty-one percent, 82%, and 14% of the 176 enrolled patients fulfilled the suspect case criteria for PIMS-TS, KD, and KSS, respectively. Temporal association with SARS-CoV-2 was confirmed in 85% of the patients and 38% were admitted to the PICU. The more common clinical manifestations were fever, abdominal pain, rash, and conjunctival injection. Lymphopenia was more common among PICU-admitted patients (87% vs. 51%, p < 0.0001), who also showed a lower platelet count and higher plasmatic levels of inflammatory and cardiac markers. Mitral valve insufficiency, left ventricular wall motion alterations, pericardial effusion, and coronary artery alterations were observed in 30%, 30%, 19.8%, and 18.6% of the patients, respectively. Days to initiation of treatment, rash, lymphopenia, and low platelet count were significant independent contributions to PICU admission. Conclusion: Rates of severe outcomes of PIMS-TS in the present study agreed with those observed in high-income countries. Together with other published studies, this work helps clinicians to better understand this novel clinical entity.Fil: Vainstein, Eduardo. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Baleani, Silvia. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Urrutia, Luis. Gobierno de la Ciudad de Buenos Aires. Hospital de Pediatría "Juan P. Garrahan"; ArgentinaFil: Affranchino, Nicolás. Gobierno de la Ciudad de Buenos Aires. Hospital de Pediatría "Juan P. Garrahan"; ArgentinaFil: Ackerman, Judith. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños Pedro Elizalde (ex Casa Cuna); ArgentinaFil: Cazalas, Mariana. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Goldsman, Alejandro. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Sardella, Angela. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Tolin, Ana Laura. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Goldaracena, Pablo. Provincia de Buenos Aires. Ministerio de Salud. Hospital de Niños "Sor María Ludovica" de La Plata; ArgentinaFil: Fabi, Mariana. Provincia de Buenos Aires. Ministerio de Salud. Hospital de Niños "Sor María Ludovica" de La Plata; ArgentinaFil: Cosentino, Mariana. Hospital Británico de Buenos Aires; ArgentinaFil: Magliola, Ricardo. Hospital Británico de Buenos Aires; ArgentinaFil: Roggiero, Gustavo. Provincia de Buenos Aires. Ministerio de Salud. Hospital Alta Complejidad en Red El Cruce Dr. Néstor Carlos Kirchner Samic; ArgentinaFil: Manso, Paula. Provincia de Buenos Aires. Ministerio de Salud. Hospital Alta Complejidad en Red El Cruce Dr. Néstor Carlos Kirchner Samic; ArgentinaFil: Triguy, Jésica. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Ballester, Celeste. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Cervetto, Vanesa. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños Pedro Elizalde (ex Casa Cuna); ArgentinaFil: Vaccarello, María. Sanatorio de la Trinidad; ArgentinaFil: De Carli, Domingo Norberto. Clínica del Niño de Quilmes; ArgentinaFil: De Carli, Maria Estela. Clínica del Niño de Quilmes; ArgentinaFil: Ciotti, Ana Laura. Hospital Nacional Profesor Alejandro Posadas; ArgentinaFil: Sicurello, María Irene. Gobierno de la Ciudad de Buenos Aires. Hospital General de Niños "Ricardo Gutiérrez"; ArgentinaFil: Rios Leiva, Cecilia. Provincia de Buenos Aires. Ministerio de Salud. Hospital Interzonal de Agudos "Eva Perón"; ArgentinaFil: Villalba, Claudia. Gobierno de la Ciudad de Buenos Aires. Hospital de Pediatría "Juan P. Garrahan"; ArgentinaFil: Hortas, María. Sanatorio de la Trinidad; ArgentinaFil: Peña, Sonia. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: González, Gabriela. Gobierno de la Provincia de Mendoza. Hospital Pediátrico Humberto Notti; ArgentinaFil: Zold, Camila Lidia. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Fisiología y Biofísica Bernardo Houssay. Universidad de Buenos Aires. Facultad de Medicina. Instituto de Fisiología y Biofísica Bernardo Houssay; ArgentinaFil: Murer, Mario Gustavo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Fisiología y Biofísica Bernardo Houssay. Universidad de Buenos Aires. Facultad de Medicina. Instituto de Fisiología y Biofísica Bernardo Houssay; ArgentinaFil: Grippo, M.. No especifíca;Fil: Vázquez, H.. No especifíca;Fil: Morós, C.. No especifíca;Fil: Di Santo, M.. No especifíca;Fil: Villa, A.. No especifíca;Fil: Lazota, P.. No especifíca;Fil: Foti, M.. No especifíca;Fil: Napoli, N.. No especifíca;Fil: Katsikas, M. M.. No especifíca;Fil: Tonello, L.. No especifíca;Fil: Peña, J.. No especifíca;Fil: Etcheverry, M.. No especifíca;Fil: Iglesias, D.. No especifíca;Fil: Alcalde, A. L.. No especifíca;Fil: Bruera, M.J.. No especifíca;Fil: Bruzzo, V.. No especifíca;Fil: Giordano, P.. No especifíca;Fil: Pena Acero, F.. No especifíca;Fil: Netri Pelandi, G.. No especifíca;Fil: Pastaro, D.. No especifíca;Fil: Bleiz, J.. No especifíca;Fil: Rodríguez, M. F.. No especifíca;Fil: Laghezza, L.. No especifíca;Fil: Molina, M. B.. No especifíca;Fil: Patynok, N.. No especifíca;Fil: Chatelain, M. S.. No especifíca;Fil: Aguilar, M. J.. No especifíca;Fil: Gamboa, J.. No especifíca;Fil: Cervan, M.. No especifíca;Fil: Ruggeri, A.. No especifíca;Fil: Marinelli, I.. No especifíca;Fil: Checcacci, E.. No especifíca;Fil: Meregalli, C.. No especifíca;Fil: Damksy Barbosa, J.. No especifíca;Fil: Fernie, L.. No especifíca;Fil: Fernández, M. J.. No especifíca;Fil: Saenz Tejeira, M.M.. No especifíca;Fil: Cereigido, C.. No especifíca;Fil: Nunell, A.. No especifíca;Fil: Villar, D.. No especifíca;Fil: Mansilla, A. D.. No especifíca;Fil: Darduin, M. D.. No especifíca

Laparoscopic right hemicolectomy: the SICE (Societ\ue0 Italiana di Chirurgia Endoscopica e Nuove Tecnologie) network prospective trial on 1225 cases comparing intra corporeal versus extra corporeal ileo-colic side-to-side anastomosis

Background: While laparoscopic approach for right hemicolectomy (LRH) is considered appropriate for the surgical treatment of both malignant and benign diseases of right colon, there is still debate about how to perform the ileo-colic anastomosis. The ColonDxItalianGroup (CoDIG) was designed as a cohort, observational, prospective, multi-center national study with the aims of evaluating the surgeons\u2019 attitude regarding the intracorporeal (ICA) or extra-corporeal (ECA) anastomotic technique and the related surgical outcomes. Methods: One hundred and twenty-five Surgical Units experienced in colorectal and advanced laparoscopic surgery were invited and 85 of them joined the study. Each center was asked not to change its surgical habits. Data about demographic characteristics, surgical technique and postoperative outcomes were collected through the official SICE website database. One thousand two hundred and twenty-five patients were enrolled between March 2018 and September 2018. Results: ICA was performed in 70.4% of cases, ECA in 29.6%. Isoperistaltic anastomosis was completed in 85.6%, stapled in 87.9%. Hand-sewn enterotomy closure was adopted in 86%. Postoperative complications were reported in 35.4% for ICA and 50.7% for ECA; no significant difference was found according to patients\u2019 characteristics and technologies used. Median hospital stay was significantly shorter for ICA (7.3 vs. 9 POD). Postoperative pain in patients not prescribed opioids was significantly lower in ICA group. Conclusions: In our survey, a side-to-side isoperistaltic stapled ICA with hand-sewn enterotomy closure is the most frequently adopted technique to perform ileo-colic anastomosis after any indications for elective LRH. According to literature, our study confirmed better short-term outcomes for ICA, with reduction of hospital stay and postoperative pain. Trial registration: Clinical trial (Identifier: NCT03934151)

Evaluation of appendicitis risk prediction models in adults with suspected appendicitis

Background Appendicitis is the most common general surgical emergency worldwide, but its diagnosis remains challenging. The aim of this study was to determine whether existing risk prediction models can reliably identify patients presenting to hospital in the UK with acute right iliac fossa (RIF) pain who are at low risk of appendicitis. Methods A systematic search was completed to identify all existing appendicitis risk prediction models. Models were validated using UK data from an international prospective cohort study that captured consecutive patients aged 16–45 years presenting to hospital with acute RIF in March to June 2017. The main outcome was best achievable model specificity (proportion of patients who did not have appendicitis correctly classified as low risk) whilst maintaining a failure rate below 5 per cent (proportion of patients identified as low risk who actually had appendicitis). Results Some 5345 patients across 154 UK hospitals were identified, of which two‐thirds (3613 of 5345, 67·6 per cent) were women. Women were more than twice as likely to undergo surgery with removal of a histologically normal appendix (272 of 964, 28·2 per cent) than men (120 of 993, 12·1 per cent) (relative risk 2·33, 95 per cent c.i. 1·92 to 2·84; P < 0·001). Of 15 validated risk prediction models, the Adult Appendicitis Score performed best (cut‐off score 8 or less, specificity 63·1 per cent, failure rate 3·7 per cent). The Appendicitis Inflammatory Response Score performed best for men (cut‐off score 2 or less, specificity 24·7 per cent, failure rate 2·4 per cent). Conclusion Women in the UK had a disproportionate risk of admission without surgical intervention and had high rates of normal appendicectomy. Risk prediction models to support shared decision‐making by identifying adults in the UK at low risk of appendicitis were identified

A model-based prediction of balancing behavior of rotors above the speed range in available balancing systems

Rotor balancing is probably the most discussed topic in the entire literature about rotor dynamics. It would therefore seem that, from the point of view of theory, this is a problem of little interest, however, balancing is very relevant in the industrial practice and sometimes there are very particular cases that cannot be addressed and solved by traditional methods. Moreover, many papers deal with only simulated results or with small-scale tests-rigs, which can hardly reproduce the behavior of real rotors. The case described in this paper is just one of these and presents what could be defined as “predicting the effect of balancing” at rotational speeds that are higher than those possible on balancing machines. Rotordynamics modeling, identification techniques developed by the authors and the available vibration measurements allow the simulation of the behavior, i.e. the vibrations, of the considered turbine rotor on the balancing machine,even at rotational speeds higher than those are possible to be reached, but that correspond to the trip speed in the plant

A Navigation Interface Based on Head Tracking by Accelerometers

This work presents a novel user interface for navigation in virtual environments and remote control of devices. The proposed system is head-mounted, allowing for the control of up to six degrees of freedom while leaving the user with free hands. The device is composed of six linear accelerometers arranged on a couple of glasses and a specific embedded controller that allows for the measuring of glass acceleration information. This is then translated in motion control information for navigation in virtual environments and/or as other devices input. The specific algorithms to integrate the motion acceleration cues sensed from the glasses while filtering the drifting errors and effect related to head rotations are presented herein

Full-scale vibration testing of nozzle guide vanes

An increasing number of turboexpanders are equipped with Nozzle Guide Vane (NGV) as the first stator stage. By varying the throat area of the first stator vane the NGV enables an additional control methodology to the line-up power output allowing higher operational flexibility and higher efficiency at partial load and partial speed. The design of this component might become critical for enabling high expander availability considering its exposure to high temperature, thermal loading, and fluid induced vibrations. This is especially true also considering that the vibration frequencies of this sub-assembly are influenced by internal clearances and by the value of the friction coefficient, which leaves a relevant margin of error when using numerical methods (such as FEM) for predicting the actual structural behavior of this component. In this paper, the design of a full-scale test bench for the determination of both friction coefficients and modal behavior of a nozzle guide vane geometry is described. The bench enables us to simulate the pre-load due to aerodynamic forces on the NGV airfoil simulating the actual working conditions of bushes and bearings