Measurement of the fraction of t-tbar production via gluon-gluon fusion in p-pbar collisions at sqrt(s)=1.96 TeV

We present a measurement of the ratio of t-tbar production cross section via gluon-gluon fusion to the total t-tbar production cross section in p-pbar collisions at sqrt{s}=1.96 TeV at the Tevatron. Using a data sample with an integrated luminosity of 955/pb recorded by the CDF II detector at Fermilab, we select events based on the t-tbar decay to lepton+jets. Using an artificial neural network technique we discriminate between t-tbar events produced via q-qbar annihilation and gluon-gluon fusion, and find Cf=(gg->ttbar)/(pp->ttbar)<0.33 at the 68% confidence level. This result is combined with a previous measurement to obtain the most precise measurement of this quantity, Cf=0.07+0.15-0.07.Comment: submitted to Phys. Rev.

Measurement of Resonance Parameters of Orbitally Excited Narrow B^0 Mesons

We report a measurement of resonance parameters of the orbitally excited (L=1) narrow B^0 mesons in decays to B^{(*)+}\pi^- using 1.7/fb of data collected by the CDF II detector at the Fermilab Tevatron. The mass and width of the B^{*0}_2 state are measured to be m(B^{*0}_2) = 5740.2^{+1.7}_{-1.8}(stat.) ^{+0.9}_{-0.8}(syst.) MeV/c^2 and \Gamma(B^{*0}_2) = 22.7^{+3.8}_{-3.2}(stat.) ^{+3.2}_{-10.2}(syst.) MeV/c^2. The mass difference between the B^{*0}_2 and B^0_1 states is measured to be 14.9^{+2.2}_{-2.5}(stat.) ^{+1.2}_{-1.4}(syst.) MeV/c^2, resulting in a B^0_1 mass of 5725.3^{+1.6}_{-2.2}(stat.) ^{+1.4}_{-1.5}(syst.) MeV/c^2. This is currently the most precise measurement of the masses of these states and the first measurement of the B^{*0}_2 width.Comment: 7 pages, 1 figure, 1 table. Submitted to Phys.Rev.Let

Design hazard identification and the link to site experience

The training, development and routes to charteredship of building design engineers have undergone a major transformation in recent years. Additionally, the duration and quality of site experience being gained by designers is reducing. While accident causation is often complex, previous research shows a potential link between design and construction accidents. The effectiveness of the UK’s Construction (Design and Management) (CDM) Regulations is being questioned, and designers regularly do not recognise the impact they can make on site safety. A newly developed hazard perception test was used to determine if students and design practitioners are able to identify hazards in designs and to establish if site experience impacts hazard identification. The results of the tests show an association between the ability to identify and mitigate hazards and possession of site experience. The results provide empirical evidence that supports previous anecdotal evidence. The results also question if the design engineers of today are suitably equipped to fulfil the designer’s responsibilities under the CDM Regulations

Rural men and mental health: their experiences and how they managed

There is a growing awareness that a primary source of information about mental health lies with the consumers. This article reports on a study that interviewed rural men with the aim of exploring their mental health experiences within a rural environment. The results of the interviews are a number of stories of resilience and survival that highlight not only the importance of exploring the individuals' perspective of their issues, but also of acknowledging and drawing on their inner strengths. Rural men face a number of challenges that not only increase the risk of mental illness but also decrease the likelihood of them seeking and/or finding professional support. These men's stories, while different from each other, have a common thread of coping. Despite some support from family and friends participants also acknowledged that seeking out professional support could have made the recovery phase easier. Mental health nurses need to be aware, not only of the barrier to professional support but also of the significant resilience that individuals have and how it can be utilised

Top Quark Mass Measurement in the Lepton plus Jets Channel Using a Modified Matrix Element Method

46 pages, 16 figures. Edited in response to referee comments and resubmitted to Phys. Rev. DWe report a measurement of the top quark mass, m_t, obtained from ppbar collisions at sqrt(s) = 1.96 TeV at the Fermilab Tevatron using the CDF II detector. We analyze a sample corresponding to an integrated luminosity of 1.9 fb^-1. We select events with an electron or muon, large missing transverse energy, and exactly four high-energy jets in the central region of the detector, at least one of which is tagged as coming from a b quark. We calculate a signal likelihood using a matrix element integration method, with effective propagators to take into account assumptions on event kinematics. Our event likelihood is a function of m_t and a parameter JES that determines /in situ/ the calibration of the jet energies. We use a neural network discriminant to distinguish signal from background events. We also apply a cut on the peak value of each event likelihood curve to reduce the contribution of background and badly reconstructed events. Using the 318 events that pass all selection criteria, we find m_t = 172.7 +/- 1.8 (stat. + JES) +/- 1.2 (syst.) GeV/c^2.We report a measurement of the top quark mass, mt, obtained from pp̅ collisions at √s=1.96  TeV at the Fermilab Tevatron using the CDF II detector. We analyze a sample corresponding to an integrated luminosity of 1.9  fb-1. We select events with an electron or muon, large missing transverse energy, and exactly four high-energy jets in the central region of the detector, at least one of which is tagged as coming from a b quark. We calculate a signal likelihood using a matrix element integration method, where the matrix element is modified by using effective propagators to take into account assumptions on event kinematics. Our event likelihood is a function of mt and a parameter JES (jet energy scale) that determines in situ the calibration of the jet energies. We use a neural network discriminant to distinguish signal from background events. We also apply a cut on the peak value of each event likelihood curve to reduce the contribution of background and badly reconstructed events. Using the 318 events that pass all selection criteria, we find mt=172.7±1.8(stat+JES)±1.2(syst)  GeV/c2.Peer reviewe

Search for a Higgs Boson Decaying to Two W Bosons at CDF

We present a search for a Higgs boson decaying to two W bosons in ppbar collisions at sqrt(s)=1.96 TeV center-of-mass energy. The data sample corresponds to an integrated luminosity of 3.0 fb-1 collected with the CDF II detector. We find no evidence for production of a Higgs boson with mass between 110 and 200 GeV/c^2, and determine upper limits on the production cross section. For the mass of 160 GeV/c^2, where the analysis is most sensitive, the observed (expected) limit is 0.7 pb (0.9 pb) at 95% Bayesian credibility level which is 1.7 (2.2) times the standard model cross section

Search for Long-Lived Massive Charged Particles in 1.96 TeV \bar{p}p} Collisions

16 pages, 2 figures; Revision to fix PDF errors on some displays/printersWe performed a signature-based search for long-lived charged massive particles (CHAMPs) produced in 1.0 $\rm{fb}^{-1}$ of $\bar{p}p$ collisions at $\sqrt{s}=1.96$ TeV, collected with the CDF II detector using a high transverse-momentum ($p_T$) muon trigger. The search used time-of-flight to isolate slowly moving, high-$p_T$ particles. One event passed our selection cuts with an expected background of $1.9 \pm 0.2$ events. We set an upper bound on the production cross section, and, interpreting this result within the context of a stable scalar top quark model, set a lower limit on the particle mass of 249 GeV/$c^2$ at 95% C.L.We performed a signature-based search for long-lived charged massive particles produced in 1.0  fb-1 of pp̅ collisions at √s=1.96  TeV, collected with the CDF II detector using a high transverse-momentum (pT) muon trigger. The search used time of flight to isolate slowly moving, high-pT particles. One event passed our selection cuts with an expected background of 1.9±0.2 events. We set an upper bound on the production cross section and, interpreting this result within the context of a stable scalar top-quark model, set a lower limit on the particle mass of 249  GeV/c2 at 95% C.L.Peer reviewe

Search for WW and WZ production in lepton plus jets final state at CDF

submitted to Phys. Rev. D (RC)We present a search for WW and WZ production in final states that contain a charged lepton (electron or muon) and at least two jets, produced in sqrt(s) = 1.96 TeV ppbar collisions at the Fermilab Tevatron, using data corresponding to 1.2 fb-1 of integrated luminosity collected with the CDF II detector. Diboson production in this decay channel has yet to be observed at hadron colliders due to the large single W plus jets background. An artificial neural network has been developed to increase signal sensitivity, as compared with an event selection based on conventional cuts. We set a 95% confidence level upper limit of sigma_{WW}* BR(W->lnu,W->jets)+ sigma_{WZ}*BR(W->lnu,Z->jets)We present a search for WW and WZ production in final states that contain a charged lepton (electron or muon) and at least two jets, produced in √s=1.96  TeV pp̅ collisions at the Fermilab Tevatron, using data corresponding to 1.2  fb-1 of integrated luminosity collected with the CDF II detector. Diboson production in this decay channel has yet to be observed at hadron colliders due to the large single W plus jets background. An artificial neural network has been developed to increase signal sensitivity, as compared with an event selection based on conventional cuts. We set a 95% confidence level upper limit of σWW×BR(W→ℓνℓ,W→jets)+σWZ×BR(W→ℓνℓ,Z→jets)<2.88  pb, which is consistent with the standard model next-to-leading-order cross section calculation for this decay channel of 2.09±0.12  pb.Peer reviewe