Comparison of 2D debris-flow simulation models with field events

Three two-dimensional (2D) debris-flow simulation models are applied to two large well-documented debris-flow events which caused major deposition of solid material on the fan. The models are based on a Voellmy fluid rheology reflecting turbulent-like and basal frictional stresses, a quadratic rheologic formulation including Bingham, collisional and turbulent stresses, and a Herschel-Bulkley rheology representing a viscoplastic fluid. The rheologic or friction parameters of the models are either assumed a priori or adjusted to best match field observations. All three models are capable of reasonably reproducing the depositional pattern on the alluvial fan after the models have been calibrated using historical data from the torrent. Accurate representation of the channel and fan topography is especially important to achieve a good replication of the observed deposition patter

The use of airborne LiDAR data for the analysis of debris flow events in Switzerland

A methodology of magnitude estimates for debris flow events is described using airborne LiDAR data. Light Detection And Ranging (LiDAR) is a widely used technology to generate digital elevation information. LiDAR data in alpine regions can be obtained by several commercial companies where the automated filtering process is proprietary and varies from companies to companies. This study describes the analysis of geomorphologic changes using digital terrain models derived from commercial LiDAR data. The estimation of the deposition volumes is based on two digital terrain models covering the same area but differing in their time of survey. In this study two surveyed deposition areas of debris flows, located in the canton of Berne, Switzerland, were chosen as test cases. We discuss different grid interpolating techniques, other preliminary work and the accuracy of the used LiDAR data and volume estimates

Bedload transport fluctuations, flow conditions, and disequilibrium ratio at the Swiss Erlenbach stream: results from 27 years of high-resolution temporal measurements

Based on measurements with the Swiss plate geophone system with a 1 min temporal resolution, bedload transport fluctuations were analysed as a function of the flow and transport conditions in the Swiss Erlenbach stream. The study confirms a finding from an earlier event-based analysis of the same bedload transport data, which showed that the disequilibrium ratio of measured to calculated transport rate (disequilibrium condition) influences the sediment transport behaviour. To analyse the transport conditions, the following elements were examined to characterise bedload transport fluctuations: (i) the autocorrelation coefficient of bedload transport rates as a function of lag time (memory effect), (ii) the critical discharge at the start and end of a transport event, (iii) the variability in the bedload transport rates, and (iv) a hysteresis index as a measure of the strength of bedload transport during the rising and falling limb of the hydrograph. This study underlines that above-average disequilibrium conditions, which are associated with a larger sediment availability on the streambed, generally have a stronger effect on subsequent transport conditions than below-average disequilibrium conditions, which are associated with comparatively less sediment availability on the streambed. The findings highlight the important roles of the sediment availability on the streambed, the disequilibrium ratio, and the hydraulic forcing in view of a better understanding of the bedload transport fluctuations in a steep mountain stream.</p

Comparison of flow resistance relations for debris flows using a one-dimensional finite element simulation model

International audienceThis paper describes a one-dimensional finite element code for debris flows developed to model the flow within a steep channel and the stopping conditions on the fan. The code allows the systematic comparison of a wide variety of previously proposed one-phase flow resistance laws using the same finite element solution method. The one-dimensional depth-averaged equations of motion and the numerical model are explained. The model and implementation of the flow resistance relations was validated using published analytical results for the dam break case. Reasonable agreement for the front velocities and stopping location for a debris-flow event in the Kamikamihori torrent in Japan can be achieved with turbulent flow resistance relations including "stop" terms which allow the flow to come to rest on a gently sloping surface. While it is possible to match the overall bulk flow behavior using relatively simple flow resistance relations, they must be calibrated. A sensitivity analysis showed that the shape of the upstream input hydrograph does not much affect the flow conditions in the lower part of the flow path, whereas the event volume is much more important

Inertial drag and lift forces for coarse grains on rough alluvial beds measured using in-grain accelerometers

Quantifying the force regime that controls the movement of a single grain during fluvial transport has historically proven to be difficult. Inertial micro-electromechanical system (MEMS) sensors (sensor assemblies that mainly comprise micro-accelerometers and gyroscopes) can used to address this problem using a “smart pebble”: a mobile inertial measurement unit (IMU) enclosed in a stone-like assembly that can measure directly the forces on a particle during sediment transport. Previous research has demonstrated that measurements using MEMS sensors can be used to calculate the dynamics of single grains over short time periods, despite limitations in the accuracy of the MEMS sensors that have been used to date. This paper develops a theoretical framework for calculating drag and lift forces on grains based on IMU measurements. IMUs were embedded a spherical and an ellipsoidal grain and used in flume experiments in which flow was increased until the grain moved. Acceleration measurements along three orthogonal directions were then processed to calculate the threshold force for entrainment, resulting in a statistical approximation of inertial impulse thresholds for both the lift and drag components of grain inertial dynamics. The ellipsoid IMU was also deployed in a series of experiments in a steep stream (Erlenbach, Switzerland). The inertial dynamics from both sets of experiments provide direct measurement of the resultant forces on sediment particles during transport, which quantifies (a) the effect of grain shape and (b) the effect of varied-intensity hydraulic forcing on the motion of coarse sediment grains during bedload transport. Lift impulses exert a significant control on the motion of the ellipsoid across hydraulic regimes, despite the occurrence of higher-magnitude and longer-duration drag impulses. The first-order statistical generalisation of the results suggests that the kinetics of the ellipsoid are characterised by low- or no-mobility states and that the majority of mobility states are controlled by lift impulses

Hydrological Drivers of Bedload Transport in an Alpine Watershed

Understanding and predicting bedload transport is an important element of watershed management. Yet, predictions of bedload remain uncertain by up to several order(s) of magnitude. In this contribution, we use a 5-year continuous time series of streamflow and bedload transport monitoring in a 13.4-km2 snow-dominated Alpine watershed in the Western Swiss Alps to investigate hydrological drivers of bedload transport. Following a calibration of the bedload sensors, and a quantification of the hydraulic forcing of streamflow upon bedload, a hydrological analysis is performed to identify daily flow hydrographs influenced by different hydrological drivers: rainfall, snowmelt, and combined rain and snowmelt events. We then quantify their respective contribution to bedload transport. Results emphasize the importance of combined rain and snowmelt events, for both annual bedload volumes (77% on average) and peaks in bedload transport rate. A non-negligible, but smaller, amount of bedload transport may occur during late summer and autumn storms, once the snowmelt contribution and baseflow have significantly decreased (9% of the annual volume on average). Although rainfall-driven changes in flow hydrographs are responsible for a large majority of the annual bedload volumes (86% on average), the identified melt-only events also represent a substantial contribution (14% on average). The results of this study help to improve current predictions of bedload transport through a better understanding of the bedload magnitude-frequency relationship under different hydrological conditions. We further discuss how bedload transport could evolve under a changing climate through its effects on Alpine watershed hydrology

Characterization of wood-laden flows in rivers

Inorganic sediment is not the only solid‐fraction component of river flows; flows may also carry significant amounts of large organic material (i.e., large wood), but the characteristics of these wood‐laden flows (WLF) are not well understood yet. With the aim to shed light on these relatively unexamined phenomena, we collected home videos showing natural flows with wood as the main solid component. Analyses of these videos as well as the watersheds and streams where the videos were recorded allowed us to define for the first time WLF, describe the main characteristics of these flows and broaden the definition of wood transport regimes (adding a new regime called here hypercongested wood transport). According to our results, WLF may occur repeatedly, in a large range of catchment sizes, generally in steep, highly confined single thread channels in mountain areas. WLF are typically highly unsteady and the log motion is non‐uniform, as described for other inorganic sediment‐laden flows (e.g., debris flows). The conceptual integration of wood into our understanding of flow phenomena is illustrated by a novel classification defining the transition from clear water to hypercongested, wood and sediment‐laden flows, according to the composition of the mixture (sediment, wood, and water). We define the relevant metrics for the quantification and modelling of WLF, including an exhaustive discussion of different modelling approaches (i.e., Voellmy, Bingham and Manning) and provide a first attempt to simulate WLF. We draw attention to WLF phenomena to encourage further field, theoretical, and experimental investigations that may contribute to a better understanding of flows river basins, leading to more accurate predictions, and better hazard mitigation and management strategies

Design of a bed load and driftwood filtering dam, analysis of the phenomena and hydraulic design

Flood protection often calls on to the realization of retention works for bed load as well as wood and debris flow. Certain relatively recent arrangements did not perform according to their intended function, what shows the complexity of the design and the implementation of such works. Adaptations were necessary to reach the security objectives. The design of a retention dam for solid materials and floating driftwood requires the consideration of numerous hydraulic and material transport processes. The analyses and design validation can be made with two approaches: physical modelling by the construction of a reduced scale model and the test realization or numerical simulation, by means of software packages such as GESMAT (1D) or TOPOFLOW (2D). The present work consists in implementing both approaches, in estimating and in comparing the answers which could be given for a bed load and debris flow filtering dam on a river with a slope of the order of 10%. Thanks to water level gauges and visual observations during tests on the physical model, the progression of the obstructions by driftwood and bed load is well understood, and the effectiveness of these obstructions proven. The tested work plays at first a role of filtering and retention and secondly a role of side overflow towards a zone with low damage potential, when the capacity of the in-stream retention space is reached. The performed numerical simulations, essentially in 1D, reproduce well the phenomena of bed load aggradation. Moreover, the potential obstruction by floating wood is considered and influences the behavior of the structure. By putting in parallel physical and numerical models, it was possible thanks to the results from the physical scale model to refine the numerical simulation tools taking into consideration additional components and behavior-type rules. These further established rules can now be used for other cases where physical modelling is not foreseen

Testing fluvial erosion models using the transient response of bedrock rivers to tectonic forcing in the Apennines, Italy

The transient response of bedrock rivers to a drop in base level can be used to discriminate between competing fluvial erosion models. However, some recent studies of bedrock erosion conclude that transient river long profiles can be approximately characterized by a transport‐limited erosion model, while other authors suggest that a detachment‐limited model best explains their field data. The difference is thought to be due to the relative volume of sediment being fluxed through the fluvial system. Using a pragmatic approach, we address this debate by testing the ability of end‐member fluvial erosion models to reproduce the well‐documented evolution of three catchments in the central Apennines (Italy) which have been perturbed to various extents by an independently constrained increase in relative uplift rate. The transport‐limited model is unable to account for the catchments’response to the increase in uplift rate, consistent with the observed low rates of sediment supply to the channels. Instead, a detachment‐limited model with a threshold corresponding to the field‐derived median grain size of the sediment plus a slope‐dependent channel width satisfactorily reproduces the overall convex long profiles along the studied rivers. Importantly, we find that the prefactor in the hydraulic scaling relationship is uplift dependent, leading to landscapes responding faster the higher the uplift rate, consistent with field observations. We conclude that a slope‐ dependent channel width and an entrainment/erosion threshold are necessary ingredients when modeling landscape evolution or mapping the distribution of fluvial erosion rates in areas where the rate of sediment supply to channels is low

Reduction of Long-Term Bedrock Incision Efficiency by Short-Term Alluvial Cover Intermittency

International audienceFluctuations of the sediment volume stored in mountain channels are driven by stochastic variations of discharge and sediment supply and can inhibit bedrock incision if sediment thickness is too large. Here, I study how this shortƒ]term stochasticity propagates into the longƒ]term reduction of bedrock incision efficiency (the cover effect) at geological time scales. I introduce a new numerical model that resolves sediment transport and bedrock incision at daily time scales, and is run for thousands of years. It incorporates (1) a transport threshold and daily stochastic variations in water discharge and sediment supply, (2) a freely evolving channel width and slope, and (3) an explicit treatment of alluvial thickness variations and corresponding bed incision reduction. For typical mountain river conditions the model predicts that alluvial cover oscillates between complete and negligible incision reduction. In this intermittent regime the longƒ]term cover effect is mainly set by the fraction of time spent in full cover, and the presentƒ]day extent of alluvial cover is not representative of longƒ]term dynamics. The longƒ]term dynamics. The longƒterm integrated cover effect law differs strongly from proposed theoretical and experimental models, and it is controlled by sediment supply stochasticity rather than the details of cover development at the hydraulic time scale. Model results also suggest that steady state channel configuration always depends on sediment supply rate, while being never limited by transport capacity or strictly detachment limited. These results point out that discharge and sediment supply stochasticity should not be considered less important than the intricate details of incision laws to model long-term bedrock channel dynamics