Effect of starvation and subsequent feeding on glycogen concentration, behavior and mortality in the golden mussel Limnoperna Fortunei (Dunker, 1857) (Bivalvia: Mytilidae)

The success of Limnoperna fortunei as an invasive species is related to its physiological plasticity that allows them to endure adverse environmental conditions. Starvation tolerance is considered to be an important trait associated with bivalve invasiveness. In natural ecosystems, food resources can vary during the year, exposing mussels to variable periods of starvation or limited food availability. Thus, mussels have developed physiological strategies to tolerate fluctuations in food availability. Glycogen concentration has been used in different monitoring studies as an indicator of the nutritional condition of bivalves. The aim of this study was to investigate the physiological responses of L. fortunei based on the glycogen concentrations of specimens under four treatments, comprising differentcombinations of feeding and starvation, during 125 days. The experiment was carried out in two phases. In the phase I, mussels were divided in two treatments: starvation (S) and feeding (F). After 100 days, tissue samples were collected to quantify glycogen concentrations and, each phase I group was divided in two subgroups: starvation (S) and feeding (F), resulting in four treatments. In the phase II, that lasted 25 days, starvation specimens (S) from phase I were allowed to feed (starvation-feeding treatment, or S-F), or continued to undergo starvation (starvation-starvation treatment, or S-S) and the feeding specimens (F) continued feeding (feeding-feeding group, or F-F), or were subjected to starvation (feeding-starvation treatment, or F-S). Behavior (valve-closing) and mortality were recorded in 24 h intervals. After the 25 days (phase II) all specimens were killed, and thei r soft tissue was removed to quantify glycogen concentrations. The glycogen concentration of the S-F treatment was lower than that of the F-S treatment, which was initially allowed to feed (phase I) and then subjected to starvation (phase II). Stability in the glycogen concentrations was observed when the phase II feeding conditions were maintained during the experiments, as observed in the S-S (continued starvation) and F-F (continued feeding) treatments. Based on our glycogen concentrations results, the golden mussel shows a higher tolerance to starvation (125 days) than has previously been published, which suggests that its tolerance strongly influences its invasive behavior.Facultad de Ciencias Naturales y Muse

Effect of starvation and subsequent feeding on glycogen concentration, behavior and mortality in the golden mussel Limnoperna Fortunei (Dunker, 1857) (Bivalvia: Mytilidae)

The success of Limnoperna fortunei as an invasive species is related to its physiological plasticity that allows them to endure adverse environmental conditions. Starvation tolerance is considered to be an important trait associated with bivalve invasiveness. In natural ecosystems, food resources can vary during the year, exposing mussels to variable periods of starvation or limited food availability. Thus, mussels have developed physiological strategies to tolerate fluctuations in food availability. Glycogen concentration has been used in different monitoring studies as an indicator of the nutritional condition of bivalves. The aim of this study was to investigate the physiological responses of L. fortunei based on the glycogen concentrations of specimens under four treatments, comprising differentcombinations of feeding and starvation, during 125 days. The experiment was carried out in two phases. In the phase I, mussels were divided in two treatments: starvation (S) and feeding (F). After 100 days, tissue samples were collected to quantify glycogen concentrations and, each phase I group was divided in two subgroups: starvation (S) and feeding (F), resulting in four treatments. In the phase II, that lasted 25 days, starvation specimens (S) from phase I were allowed to feed (starvation-feeding treatment, or S-F), or continued to undergo starvation (starvation-starvation treatment, or S-S) and the feeding specimens (F) continued feeding (feeding-feeding group, or F-F), or were subjected to starvation (feeding-starvation treatment, or F-S). Behavior (valve-closing) and mortality were recorded in 24 h intervals. After the 25 days (phase II) all specimens were killed, and thei r soft tissue was removed to quantify glycogen concentrations. The glycogen concentration of the S-F treatment was lower than that of the F-S treatment, which was initially allowed to feed (phase I) and then subjected to starvation (phase II). Stability in the glycogen concentrations was observed when the phase II feeding conditions were maintained during the experiments, as observed in the S-S (continued starvation) and F-F (continued feeding) treatments. Based on our glycogen concentrations results, the golden mussel shows a higher tolerance to starvation (125 days) than has previously been published, which suggests that its tolerance strongly influences its invasive behavior.Facultad de Ciencias Naturales y Muse

Effect of starvation and subsequent feeding on glycogen concentration, behavior and mortality in the golden mussel Limnoperna Fortunei (Dunker, 1857) (Bivalvia: Mytilidae)

The success of Limnoperna fortunei as an invasive species is related to its physiological plasticity that allows them to endure adverse environmental conditions. Starvation tolerance is considered to be an important trait associated with bivalve invasiveness. In natural ecosystems, food resources can vary during the year, exposing mussels to variable periods of starvation or limited food availability. Thus, mussels have developed physiological strategies to tolerate fluctuations in food availability. Glycogen concentration has been used in different monitoring studies as an indicator of the nutritional condition of bivalves. The aim of this study was to investigate the physiological responses of L. fortunei based on the glycogen concentrations of specimens under four treatments, comprising differentcombinations of feeding and starvation, during 125 days. The experiment was carried out in two phases. In the phase I, mussels were divided in two treatments: starvation (S) and feeding (F). After 100 days, tissue samples were collected to quantify glycogen concentrations and, each phase I group was divided in two subgroups: starvation (S) and feeding (F), resulting in four treatments. In the phase II, that lasted 25 days, starvation specimens (S) from phase I were allowed to feed (starvation-feeding treatment, or S-F), or continued to undergo starvation (starvation-starvation treatment, or S-S) and the feeding specimens (F) continued feeding (feeding-feeding group, or F-F), or were subjected to starvation (feeding-starvation treatment, or F-S). Behavior (valve-closing) and mortality were recorded in 24 h intervals. After the 25 days (phase II) all specimens were killed, and thei r soft tissue was removed to quantify glycogen concentrations. The glycogen concentration of the S-F treatment was lower than that of the F-S treatment, which was initially allowed to feed (phase I) and then subjected to starvation (phase II). Stability in the glycogen concentrations was observed when the phase II feeding conditions were maintained during the experiments, as observed in the S-S (continued starvation) and F-F (continued feeding) treatments. Based on our glycogen concentrations results, the golden mussel shows a higher tolerance to starvation (125 days) than has previously been published, which suggests that its tolerance strongly influences its invasive behavior.Fil: Cordeiro, Nelmara I. S.. Universidade Federal de Minas Gerais; BrasilFil: Andrade, Jennifer T. M.. Universidade Federal de Minas Gerais; BrasilFil: Montresor, Lângia C.. Fundación Oswaldo Cruz; BrasilFil: Luz, Dalva M. R.. Universidade Federal de Minas Gerais; BrasilFil: Martinez, Carlos B.. Universidade Federal de Minas Gerais; BrasilFil: Darrigran, Gustavo Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de la Plata. Facultad de Ciencias Naturales y Museo. División Zoología Invertebrados; ArgentinaFil: Pinheiro, Jairo. Universidade Federal Rural Do Rio de Janeiro;Fil: Vidigal, Teofânia H. D. A.. Universidade Federal de Minas Gerais; Brasi

Photography-based taxonomy is inadequate, unnecessary, and potentially harmful for biological sciences

The question whether taxonomic descriptions naming new animal species without type specimen(s) deposited in collections should be accepted for publication by scientific journals and allowed by the Code has already been discussed in Zootaxa (Dubois & Nemésio 2007; Donegan 2008, 2009; Nemésio 2009a–b; Dubois 2009; Gentile & Snell 2009; Minelli 2009; Cianferoni & Bartolozzi 2016; Amorim et al. 2016). This question was again raised in a letter supported by 35 signatories published in the journal Nature (Pape et al. 2016) on 15 September 2016. On 25 September 2016, the following rebuttal (strictly limited to 300 words as per the editorial rules of Nature) was submitted to Nature, which on 18 October 2016 refused to publish it. As we think this problem is a very important one for zoological taxonomy, this text is published here exactly as submitted to Nature, followed by the list of the 493 taxonomists and collection-based researchers who signed it in the short time span from 20 September to 6 October 2016

Is There Scientific Evidence Favoring The Substitution Of Commercially Pure Titanium With Titanium Alloys For The Manufacture Of Dental Implants?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)The development of Ti alloys to manufacture dental implants has emerged in recent years due to the increased failure of commercially pure titanium (cpTi) implants. Thus, this study reviews existing information about the mechanical, chemical, electrochemical, and biological properties of the main Ti alloys developed over the past few years to provide scientific evidence in favor of using Ti-based alloys as alternative to cpTi. Ti alloys may be considered viable substitutes in the fabrication of dental:implants. Such evidence is given by the enhanced properties of alloys, such as a low elastic modulus, high tensile strength, satisfactory biocompatibility, and good corrosion and wear resistances. In addition, Ti alloys may be modified at the structural, chemical, and thermomechanical levels, which allows the development of materials in accordance with the demands of several situations encountered in clinical practice. Although several in vitro studies have established the superiority of Ti alloys over cpTi, mainly in terms of their mechanical properties, there is no scientific evidence that supports the total replacement of this material in vivo. This review demonstrates the superiority of (3-type alloys. However, it is evident that in vivo studies are encouraged to test new alloys to consolidate their use as substitutes for cpTi. (C) 2016 Elsevier B.V. All rights reserved.7112011215Sao Paulo State Research Foundation (FAPESP), Brazil [2014/26853-2]Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

Citric acid reduces oral biofilm and influences the electrochemical behavior of titanium : an in situ and in vitro study

Citric acid (CA) has been suggested as an effective antimicrobial agent against biofilms formed on titanium. However, the antimicrobial effect of CA in biofilms formed in the oral environment and its effects on the physical properties of titanium surface remain unknown. Therefore, this study evaluated the antimicrobial effect of CA on in situ biofilm, whether this treatment favors the bacteria recolonization and its effect on the electrochemical properties of titanium.In the in situ test, volunteers wore a palatal appliance containing titanium discs. After 7 days, the discs (N = 21) were exposed in vitro to the following treatments: immersion in 0.9% sodium chloride (control); 40% CA immersion; and 40% CA rubbing. Afterwards, these discs (N = 18) were exposed in vitro to new bacterial adhesion with Streptococcus sanguinis. New discs (N = 18) without biofilm were exposed to the treatments and subjected to electrochemical tests and surface characterization. Data were analyzed by one‐way ANOVA followed by Tukey's HSD test.The CA groups showed a significant reduction (≈ 5‐log reduction) in the biofilm formed in situ compared with the control group (p < 0.05), but no difference was found between CA application methods (p = 0.680). The acid treatment did not favor the recolonization of bacteria (p = 0.629). CA treatment did not influence the polarization resistance and capacitance of the oxide film, but statistically enhanced the electrochemical stability of titanium.Citric acid appears to be an effective clinical alternative for treatment of the main etiologic factor in dental implant failure, biofilm formation, enhancing electrochemical behavior of titanium.902149158FAPESP – Fundação de Amparo à Pesquisa Do Estado De São Paulo2015/23118‐

Functionalization of an experimental Ti-Nb-Zr-Ta alloy with a biomimetic coating produced by plasma electrolytic oxidation

This study developed an experimental quaternary titanium (Ti) alloy and evaluated its surface properties and electrochemical stability. The viability for a biofunctional surface treatment was also tested. Ti-35Nb-7Zr-5Ta (wt%) alloy was developed from pure metals. Commercially pure titanium (cpTi) and Ti-6Al-4V were used as controls. All groups had two surface conditions: untreated (machined surface) and modified by plasma electrolytic oxidation (PEO) (treated surface). The experimental alloy was successfully synthesized and exhibited β microstructure. PEO treatment created a porous surface with increased roughness, surface free energy, hardness and electrochemical stability (p < 0.05). For the machined surfaces, the Ti-Nb-Zr-Ta alloy presented the lowest hardness and elastic modulus (p < 0.05) and displayed greater polarization resistance relative to cpTi. Only PEO-treated cpTi and Ti-Al-V alloys exhibited anatase and rutile as crystalline structures. The β experimental Ti-Nb-Zr-Ta alloy seems to be a good alternative for the manufacture of dental implants, since it presents elastic modulus closer to that of bone, feasibility for surface treatment, electrochemical stability and absence of toxic elements77010381048FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP2016/11470-6; 2017/01320-0This work was supported by the São Paulo State Research Foundation (FAPESP), Brazil (grant numbers 2016/11470-6 and 2017/01320-0). The authors express their gratitude to Jamille Altheman for her contribution and support at the Laboratory of Technological Plasmas at Univ. Estadual Paulista (UNESP), to Dr Richard Landers and Rita Vinhas from the University of Campinas (Institute of Physics Gleb Wataghin) for providing the XPS facility, to Dr Mathew T Mathew from the University of Illinois at Rockford (College of Medicine at Rockford, Department of Biomedical Sciences) for the donation of the electrochemical cell, and to the Brazilian Nanotechnology National Laboratory (LNNano) at the Brazilian Center of Research in Energy and Materials (CNPEM) for the XRD facilit

Visible-light-induced photocatalytic and antibacterial activity of TiO2 codoped with nitrogen and bismuth: new perspectives to control implant-biofilm-related diseases

Biofilm-associated diseases are one of the main causes of implant failure. Currently, the development of process and focuses on the creation of surfaces with implant surface treatment goes beyond the osseointegration antimicrobial action and with the possibility to be re-activated (i.e., light source activation). Titanium dioxide (TiO2), an excellent photocatalyst used for photocatalytic antibacterial applications, could be a great alternative, but its efficiency is limited to the ultraviolet (UV) range of the electromagnetic spectrum. Since UV radiation has carcinogenic potential, we created a functional TiO2 coating codoped with nitrogen and bismuth via the plasma electrolytic oxidation (PEO) of titanium to achieve an antibacterial effect under visible light with re-activation potential. A complex surface topography was demonstrated by scanning electron microscopy and three-dimensional confocal laser scanning microscopy. Additionally, PEO-treated surfaces showed greater hydrophilicity and albumin adsorption compared to control, untreated titanium. Bismuth incorporation shifted the band gap of TiO2 to the visible region and facilitated higher degradation of methyl orange (MO) in the dark, with a greater reduction in the concentration of MO after visible-light irradiation even after 72 h of aging. These results were consistent with the in vitro antibacterial effect, where samples with nitrogen and bismuth in their composition showed the greatest bacterial reduction after 24 h of dual-species biofilm formation (Streptococcus sanguinis and Actinomyces naeslundii) in darkness with a superior effect at 30 min of visible-light irradiation. In addition, such a coating presents reusable photocatalytic potential and good biocompatibility by presenting a noncytotoxicity effect on human gingival fibroblast cells. Therefore, nitrogen and bismuth incorporation into TiO2 via PEO can be considered a promising alternative for dental implant application with antibacterial properties in darkness, with a stronger effect after visible-light application11201818618202COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPsem informação2017/00314-6; 2017/01320-0; 2016/11470-6This study was financed by the State of Sao Paulo Research Foundation (FAPESP) (grant numbers 2017/00314-6, 2017/01320-0 and 2016/11470-6) and the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)—Finance Code 001. We thank the Oral Biochemistry Lab at Piracicaba Dental School, University of Campinas, for providing their microbiology facility and the Brazilian Nanotechnology National Laboratory (LNNano) at the Brazilian Center of Research in Energy and Materials (CNPEM) for the CLSM, XPS, and XRD facilities. We also thank Professor Dr Ricardo Armini Caldas for his contribution to the elaboration of a table of contents graphic desig

Development of binary and ternary titanium alloys for dental implants

FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPObjective. The aim of this study was to develop binary and ternary titanium (Ti) alloys containing zirconium (Zr) and niobium (Nb) and to characterize them in terms of microstructural, mechanical, chemical, electrochemical, and biological properties. Methods. The experimental alloys - (in wt%) Ti-5Zr, Ti-10Zr, Ti-35Nb-5Zr, and Ti-35Nb-10Zr-were fabricated from pure metals. Commercially pure titanium (cpTi) and Ti-6Al-4V wereused as controls. Microstructural analysis was performed by means of X-ray diffraction and scanning electron microscopy. Vickers microhardness, elastic modulus, dispersive energy spectroscopy, X-ray excited photoelectron spectroscopy, atomic force microscopy, surface roughness, and surface free energy were evaluated. The electrochemical behavior analysis was conducted in a body fluid solution (pH 7.4). The albumin adsorption was measured by the bicinchoninic acid method. Data were evaluated through one-way ANOVA and the Tukey test (alpha = 0.05). Results. The alloying elements proved to modify the alloy microstructure and to enhance the mechanical properties, improving the hardness and decreasing the elastic modulus of the binary and ternary alloys, respectively. Ti-Zr alloys displayed greater electrochemical stability relative to that of controls, presenting higher polarization resistance and lower capacitance. The experimental alloys were not detrimental to albumin adsorption. Significance. The experimental alloys are suitable options for dental implant manufacturing, particularly the binary system, which showed a better combination of mechanical and electrochemical properties without the presence of toxic elements.331112441257FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP2013/08451-12014/26853-22015/25562-72016/11470-