790 research outputs found
âWiggle Matchingâ Radiocarbon Dates
This paper covers three different methods of matching radiocarbon dates to the âwigglesâ of the calibration curve in those situations where the age difference between the 14C dates is known. These methods are most often applied to tree-ring sequences. The simplest approach is to use a classical Chi-squared fit of the 14C data to the 14C curve. This gives the calendar date where the data fit best and allows tests of how good the fit is. The only drawback of this method is that it is difficult to ascertain the uncertainty in the date found in this way. An extension of this technique uses a Monte-Carlo simulation to sample possible 14C concentrations consistent with the measurement made and for each of these possibilities performs a Chi-squared fit. This method yields a distribution of values in the calendrical time-scale, from which the overall dating uncertainty can be derived. A third, rather different approach, based on Bayesian statistics, calculates the relative likelihood of each possible calendar year fit. This can then be used to calculate a range of most likely dates in a similar way to the probability method of 14C calibration. The theories underlying all three methods are discussed in this paper and a comparison made for the fitting of specific model sequences. All three methods are found to give consistent results and the application of any one of them depends on the nature of the scientific question being addressed
Radiocarbon dates from the Oxford AMS system: archaeometry datelist 35
This is the 35th list of AMS radiocarbon determinations measured at the Oxford Radiocarbon Accelerator Unit (ORAU). Amongst some of the sites included here are the latest series of determinations from the key sites of Abydos, El MirĂłn, Ban Chiang, Grotte de Pigeons (Taforalt), Alepotrypa and Oberkassel, as well as others dating to the Palaeolithic, Mesolithic and later periods. Comments on the significance of the results are provided by the submitters of the material
Recommended from our members
The resilience of postglacial hunter-gatherers to abrupt climate change
Understanding the resilience of early societies to climate change is an essential part of exploring the environmental sensitivity of human populations. There is significant interest in the role of abrupt climate events as a driver of early Holocene human activity, but there are very few well-dated records directly compared with local climate archives. Here, we present evidence from the internationally important Mesolithic site of Star Carr showing occupation during the early Holocene, which is directly compared with a high-resolution palaeoclimate record from neighbouring lake beds. We show that-once established-there was intensive human activity at the site for several hundred years when the community was subject to multiple, severe, abrupt climate events that impacted air temperatures, the landscape and the ecosystem of the region. However, these results show that occupation and activity at the site persisted regardless of the environmental stresses experienced by this society. The Star Carr population displayed a high level of resilience to climate change, suggesting that postglacial populations were not necessarily held hostage to the flickering switch of climate change. Instead, we show that local, intrinsic changes in the wetland environment were more significant in determining human activity than the large-scale abrupt early Holocene climate events
The RESET tephra database and associated analytical tools
An open-access database has been set up to support the research project study- ing the âResponse of Humans to Abrupt Environmental Transitionsâ (RESET). The main methodology underlying this project was to use tephra layers to tie together and synchronise the chronologies of stratigraphic records at archaeological and envi- ronmental sites. The database has information on occurrences, and chemical compo- sitions, of glass shards from tephra and cryptotephra deposits found across Europe. The data includes both information from the RESET project itself and from the published literature. With over 12,000 major element analyses and over 3000 trace element analyses on glass shards, relevant to 80 late Quaternary eruptions, the RESET project has generated an important archive of data. When added to the published information, the database described here has a total of more than 22,000 major element analyses and nearly 4000 trace element analyses on glass from over 240 eruptions. In addition to the database and its associated data, new methods of data analysis for assessing correlations have been developed as part of the project. In particular an approach using multi-dimensional kernel density estimates to evaluate the likelihood of tephra compositions matching is described here and tested on data generated as part of the RESET project.</p
Recommended from our members
Reconstructing the accumulation history of a saltmarsh sediment core: which age-depth model is best?
Saltmarsh-based reconstructions of relative sea-level (RSL) change play a central role in current efforts seeking to quantify the relationship between climate and sea-level rise. The development of an accurate chronology is pivotal, since errors in age-depth relationships will propagate to the final record as alterations in both the timing and magnitude of reconstructed change. A range of age-depth modelling packages are available but differences in their theoretical basis and practical operation mean contrasting accumulation histories can be produced from the same dataset.
We compare the performance of five age-depth modelling programs (Bacon, Bchron, Bpeat, Clam and OxCal) when applied to the kinds of data used in high resolution, saltmarsh-based RSL reconstructions. We investigate their relative performance by comparing modelled accumulation curves against known age-depth relationships generated from simulated stratigraphic sequences. Bpeat is particularly sensitive to non-linearities which, whilst maximising the detection of small rate changes, has the potential to generate spurious variations, particularly in the last 400 years. Bacon generally replicates the pattern and magnitude of change but with notable offsets in timing. Bchron and OxCal successfully constrain the known accumulation history within their error envelopes although the best-fit solutions tend to underestimate the magnitude of change. The best-fit solutions of Clam generally replicate the timing and magnitude of changes well, but are sensitive to the underlying shape of the calibration curve, performing poorly where plateaus in atmospheric 14C concentration exist.
We employ an ensemble of age-depth models to reconstruct a 1500 year accumulation history for a saltmarsh core recovered from Connecticut, USA based on a composite chronology comprising 26 AMS radiocarbon dates, 210Pb, 137Cs radionuclides and an historical pollen chronohorizon. The resulting record reveals non-linear accumulation during the late Holocene with a marked increase in rate around AD1800. With the exception of the interval between AD1500 and AD1800, all modelsproduce accumulation curves that agree to within ~10 cm at the century-scale. The accumulation rate increase around AD1800 is associated with the transition from a radiocarbon-based to a 210Pb dominated chronology. Whilst repeat analysis excluding the 210Pb data alters the precise timing and magnitude of this acceleration, a shift to faster accumulation compared to the long-term rate is a robust feature of the record and not simply an artefact of the switch in dating methods. Simulation indicates that a rise of similar magnitude to the post-AD1800 increase (detrended increase of ~16 cm) is theoretically constrained and detectable within the radiocarbon-dated portion of the record. The absence of such a signal suggests that the recent rate of accumulation is unprecedented in the last 1500 years. Our results indicate that reliable (sub)century-scale age-depth models can be developed from saltmarsh sequences, and that the vertical uncertainties associated with them translate to RSL reconstruction errors that are typically smaller than those associated with the most precise microfossil-based estimates of palaeomarsh-surface elevation
Recent developments in calibration for archaeological and environmental samples
The curves recommended for calibrating radiocarbon (14C) dates into absolute dates have been updated. For calibrating atmospheric samples from the Northern Hemisphere, the new curve is called IntCal20. This is accompanied by associated curves SHCal20 for the Southern Hemisphere, and Marine20 for marine samples. In this âcompanion articleâ we discuss advances and developments that have led to improvements in the updated curves and highlight some issues of relevance for the general readership. In particular the dendrochronological based part of the curve has seen a significant increase in data, with single-year resolution for certain time ranges, extending back to 13,910 calBP. Beyond the tree rings, the new curve is based upon an updated combination of marine corals, speleothems, macrofossils, and varved sediments and now reaches back to 55,000 calBP. Alongside these data advances, we have developed a new, bespoke statistical curve construction methodology to allow better incorporation of the diverse constituent records and produce a more robust curve with uncertainties. Combined, these data and methodological advances offer the potential for significant new insight into our past. We discuss some implications for the user, such as the dating of the Santorini eruption and also some consequences of the new curve for Paleolithic archaeology
A RESPONSE TO COMMUNITY QUESTIONS ON THE MARINE20 RADIOCARBON AGE CALIBRATION CURVE: MARINE RESERVOIR AGES AND THE CALIBRATION OF 14C SAMPLES FROM THE OCEANS
ABSTRACT
Radiocarbon (14C) concentrations in the oceans are different from those in the atmosphere. Understanding these ocean-atmospheric 14C differences is important both to estimate the calendar ages of samples which obtained their 14C in the marine environment, and to investigate the carbon cycle. The Marine20 radiocarbon age calibration curve is created to address these dual aims by providing a global-scale surface ocean record of radiocarbon from 55,000â0 cal yr BP that accounts for the smoothed response of the ocean to variations in atmospheric 14C production rates and factors out the effect of known changes in global-scale palaeoclimatic variables. The curve also serves as a baseline to study regional oceanic 14C variation. Marine20 offers substantial improvements over the previous Marine13 curve. In response to community questions, we provide a short intuitive guide, intended for the lay-reader, on the construction and use of the Marine20 calibration curve. We describe the choices behind the making of Marine20, as well as the similarities and differences compared with the earlier Marine calibration curves. We also describe how to use the Marine20 curve for calibration and how to estimate ÎRâthe localized variation in the oceanic 14C levels due to regional factors which are not incorporated in the global-scale Marine20 curve. To aid understanding, illustrative worked examples are provided.</jats:p
Testing and improving the IntCal20 calibration curve with independent records
Connecting calendar ages to radiocarbon (14C) ages, i.e. constructing a calibration curve, requires 14C samples that represent, or are closely connected to, atmospheric 14C values and that can also be independently dated. In addition to these data, there is information that can serve as independent tests of the calibration curve. For example, information from ice core radionuclide data cannot be directly incorporated into the calibration curve construction as it delivers less direct information on the 14C ageâcalendar age relationship but it can provide tests of the quality of the calibration curve. Furthermore, ice core ages on 14C-dated volcanic eruptions provide key information on the agreement of ice core and radiocarbon time scales. Due to their scarcity such data would have little impact if directly incorporated into the calibration curve. However, these serve as important âanchor pointsâ in time for independently testing the calibration curve and/or ice-core time scales. Here we will show that such information largely supports the new IntCal20 calibration record. Furthermore, we discuss how floating tree-ring sequences on ice-core time scales agree with the new calibration curve. For the period around 40,000 years ago we discuss unresolved differences between ice core 10Be and 14C records that are possibly related to our limited understanding of carbon cycle influences on the atmospheric 14C concentration during the last glacial period. Finally, we review the results on the time scale comparison between the Greenland ice-core time scale (GICC05) and IntCal20 that effectively allow a direct comparison of 14C-dated records with the Greenland ice core data
An extended and revised Lake Suigetsu varve chronology from âŒ50 to âŒ10 ka BP based on detailed sediment micro-facies analyses
Lake Suigetsu (Japan) is a key site for radiocarbon (14C) calibration and palaeo-environmental reconstruction in East Asia. Here we present a description of the sediment (micro)facies, which in combination with a new approach to varve interpolation allows construction of a revised varve based chronology that extends the previous 2012 varve based chronology by âŒ10 ka, back to âŒ50 ka BP. Challenges in varve counting and interpolation, which were previously discussed in detail only for the Last Glacial-Interglacial Transition, are described here back to âŒ50 ka BP. Furthermore, the relative merits of varve counting by ÎŒXRF scanning and by thin-section microscopy are discussed. Facies analysis reveals four facies zones, their transitions driven by both local and climatic controls. The lamination quality of the sediment is highly variable and varve interpolation reveals that in the analysed time interval, on average, only 50% of the annual cycles are represented by seasonal layers. In the remaining years seasonal layers are indistinguishable, i.e. either did not form or were not preserved. For varve interpolation an advanced version of the Varve Interpolation Program was used, which enabled the construction of the longest, purely varve dated chronology published, despite long intervals of poor lamination quality. The calculated interpolation uncertainty is +8.9% and â4.6%, which is well within expectations considering the high degree of interpolation and the length of the record
- âŠ