Blocking phenomena in granular magnetic alloys through magnetization, Hall effect, and magnetoresistance experiments

Magnetization and magnetotransport were measured in CoxAg1-x granular composites as a function of temperature and applied magnetic field. A transition from blocked to superparamagnetic behavior with increasing temperatures can be observed in magnetization, giant magnetoresistance and the extraordinary Hall effect measurements. However, the blocking temperature determined from magnetotransport measurements is systematically lower than the one estimated from magnetic measurements. This is due to the selective magnetic scattering, which is enhanced for smaller particles, while the magnetization probes the whole particle size distribution. (C) 2003 American Institute of Physics.82576376

3D transient heat transfer numerical analysis of multiple energy piles

This paper presents a three-dimensional (3D) transient heat transfer numerical model for multiple energy piles based on the finite volume method (FVM). The initial and boundary conditions are established and the effects of “thermal short-circulating” between two pipes of a U-tube in energy pile are investigated. Thermal partial differential equations are discretized at the spatial nodal points and solved by linear approximation method. Temperature variations of working fluid, energy pile and its surrounding soil from simulation program are compared with experimental data to validate the developed model. In addition, the influences of fluid flow rate and U-tube shank spacing are analysed. It is established that the shank spacing should be set in a range of 0.06m to 0.10m to reduce heat transfer between the two pipes and meet the structural requirement. Meanwhile, the flow rate should be controlled in a range of 0.5m3/h to 0.7m3/h to avoid the low outlet fluid temperature and decrease the influence of “thermal short-circuiting”

Lettuce Cultivar Mediates Both Phyllosphere and Rhizosphere Activity of Escherichia coli O157:H7

Plant roots and leaves can be colonized by human pathogenic bacteria, and accordingly some of the largest outbreaks of foodborne illness have been associated with salad leaves contaminated by E. coli O157. Integrated disease management strategies often exploit cultivar resistance to provide a level of protection from economically important plant pathogens; however, there is limited evidence of whether the genotype of the plant can also influence the extent of E. coli O157 colonization. To determine cultivar-specific effects on colonization by E. coli O157, we used 12 different cultivars of lettuce inoculated with a chromosomally lux-marked strain of E. coli O157:H7. Lettuce seedlings grown gnotobiotically in vitro did exhibit a differential cultivar-specific response to E. coli O157 colonization, although importantly there was no relationship between metabolic activity (measured as bioluminescence) and cell numbers. Metabolic activity was highest and lowest on the cultivars Vaila-winter gem and Dazzle respectively, and much higher in endophytic and tightly bound cells than in epiphytic and loosely bound cells. The cultivar effect was also evident in the rhizosphere of plants grown in compost, which suggests that cultivar-specific root exudate influences E. coli O157 activity. However, the influence of cultivar in the rhizosphere was the opposite to that in the phyllosphere, and the higher number and activity of E. coli O157 cells in the rhizosphere may be a consequence of them not being able to gain entry to the plant as effectively. If metabolic activity in the phyllosphere corresponds to a more prepared state of infectivity during human consumption, leaf internalization of E. coli O157 may pose more of a public health risk than leaf surface contamination alone

Factors that affect proliferation of Salmonella in tomatoes post-harvest: the roles of seasonal effects, irrigation regime, crop and pathogen genotype

MAIN OBJECTIVES: Fresh fruits and vegetables become increasingly recognized as vehicles of human salmonellosis. Physiological, ecological, and environmental factors are all thought to contribute to the ability of Salmonella to colonize fruits and vegetables pre- and post-harvest. The goal of this study was to test how irrigation levels, fruit water congestion, crop and pathogen genotypes affect the ability of Salmonella to multiply in tomatoes post-harvest. EXPERIMENTAL DESIGN: Fruits from three tomato varieties, grown over three production seasons in two Florida locations, were infected with seven strains of Salmonella and their ability to multiply post-harvest in field-grown tomatoes was tested. The field experiments were set up as a two-factor factorial split plot experiment, with the whole-plot treatments arranged in a randomized complete-block design. The irrigation treatment (at three levels) was the whole-plot factor, and the split-plot factor was tomato variety, with three levels. The significance of the main, two-way, and three-way interaction effects was tested using the (type III) F-tests for fixed effects. Mean separation for each significant fixed effect in the model was performed using Tukey's multiple comparison testing procedure. MOST IMPORTANT DISCOVERIES AND SIGNIFICANCE: The irrigation regime per se did not affect susceptibility of the crop to post-harvest proliferation of Salmonella. However, Salmonella grew significantly better in water-congested tissues of green tomatoes. Tomato maturity and genotype, Salmonella genotype, and inter-seasonal differences were the strongest factors affecting proliferation. Red ripe tomatoes were significantly and consistently more conducive to proliferation of Salmonella. Tomatoes harvested in the driest, sunniest season were the most conducive to post-harvest proliferation of the pathogen. Statistically significant interactions between production conditions affected post-harvest susceptibility of the crop to the pathogen. UV irradiation of tomatoes post-harvest promoted Salmonella growth

Arthropod communities in fungal fruitbodies are weakly structured by climate and biogeography across European beech forests

Aim The tinder fungus Fomes fomentarius is a pivotal wood decomposer in European beech Fagus sylvatica forests. The fungus, however, has regionally declined due to centuries of logging. To unravel biogeographical drivers of arthropod communities associated with this fungus, we investigated how space, climate and habitat amount structure alpha and beta diversity of arthropod communities in fruitbodies of F. fomentarius. Location Temperate zone of Europe. Taxon Arthropods. Methods We reared arthropods from fruitbodies sampled from 61 sites throughout the range of European beech and identified 13 orders taxonomically or by metabarcoding. We estimated the total number of species occurring in fruitbodies of F. fomentarius in European beech forests using the Chao2 estimator and determined the relative importance of space, climate and habitat amount by hierarchical partitioning for alpha diversity and generalized dissimilarity models for beta diversity. A subset of fungi samples was sequenced for identification of the fungus’ genetic structure. Results The total number of arthropod species occurring in fruitbodies of F. fomentarius across European beech forests was estimated to be 600. Alpha diversity increased with increasing fruitbody biomass; it decreased with increasing longitude, temperature and latitude. Beta diversity was mainly composed by turnover. Patterns of beta diversity were only weakly linked to space and the overall explanatory power was low. We could distinguish two genotypes of F. fomentarius, which showed no spatial structuring. Main conclusion Fomes fomentarius hosts a large number of arthropods in European beech forests. The low biogeographical and climatic structure of the communities suggests that fruitbodies represent a habitat that offers similar conditions across large gradients of climate and space, but are characterized by high local variability in community composition and colonized by species with high dispersal ability. For European beech forests, retention of trees with F. fomentarius and promoting its recolonization where it had declined seems a promising conservation strategy

Optimization of growth media components for polyhydroxyalkanoate (PHA) production from organic acids by Ralstonia eutropha

We employed systematic mixture analysis to determine optimal levels of acetate, propionate, and butyrate for cell growth and polyhydroxyalkanoate (PHA) production by Ralstonia eutropha H16. Butyrate was the preferred acid for robust cell growth and high PHA production. The 3-hydroxyvalerate content in the resulting PHA depended on the proportion of propionate initially present in the growth medium. The proportion of acetate dramatically affected the final pH of the growth medium. A model was constructed using our data that predicts the effects of these acids, individually and in combination, on cell dry weight (CDW), PHA content (%CDW), PHA production, 3HV in the polymer, and final culture pH. Cell growth and PHA production improved approximately 1.5-fold over initial conditions when the proportion of butyrate was increased. Optimization of the phosphate buffer content in medium containing higher amounts of butyrate improved cell growth and PHA production more than 4-fold. The validated organic acid mixture analysis model can be used to optimize R. eutropha culture conditions, in order to meet targets for PHA production and/or polymer HV content. By modifying the growth medium made from treated industrial waste, such as palm oil mill effluent, more PHA can be produced.Malaysia. Ministry of Science, Technology and Innovation (MOSTI

Measurement of the Decay Amplitudes of B0 --> J/psi K* and B0s --> J/psi phi Decays

A full angular analysis has been performed for the pseudo-scalar to vector-vector decays, B0 --> J/psi K* and B_s --> J/psi phi, to determine the amplitudes for decays with parity-even longitudinal and transverse polarization and parity-odd transverse polarization. The measurements are based on 190 B0 candidates and 40 B_s candidates collected from a data set corresponding to 89 inverse pb of pbarp collisions at root(s) = 1.8 TeV at the Fermilab Tevatron. In both decays the decay amplitude for longitudinal polarization dominates and the parity-odd amplitude is found to be small.Comment: 7 pages, 3 figures, 1 tabl

Analysis and design methods for energy geostructures

Based on discussions at the international workshop on “Thermoactive geotechnical systems for near-surface geothermal energy”, hosted at École Polytechnique Fédérale de Lausanne (EPFL), Switzerland (http://www.olgun.cee.vt.edu/workshop/), this article attempts to provide a broad overview of the analysis methods used for evaluation of systems that use either boreholes or geo-structures for heat exchange. It identifies commonalities where knowledge transfer from the former to the latter can be made, and highlights where there are significant differences that may limit this cross-fertilisation. The article then focusses on recent developments and current understanding pertaining to the analysis of the thermo-mechanical interaction between a geostructure and the ground, and how this may be incorporated into the geotechnical design of energy geostructures

Large-Scale Model-Based Assessment of Deer-Vehicle Collision Risk

Ungulates, in particular the Central European roe deer Capreolus capreolus and the North American white-tailed deer Odocoileus virginianus, are economically and ecologically important. The two species are risk factors for deer–vehicle collisions and as browsers of palatable trees have implications for forest regeneration. However, no large-scale management systems for ungulates have been implemented, mainly because of the high efforts and costs associated with attempts to estimate population sizes of free-living ungulates living in a complex landscape. Attempts to directly estimate population sizes of deer are problematic owing to poor data quality and lack of spatial representation on larger scales. We used data on 74,000 deer–vehicle collisions observed in 2006 and 2009 in Bavaria, Germany, to model the local risk of deer–vehicle collisions and to investigate the relationship between deer–vehicle collisions and both environmental conditions and browsing intensities. An innovative modelling approach for the number of deer–vehicle collisions, which allows nonlinear environment–deer relationships and assessment of spatial heterogeneity, was the basis for estimating the local risk of collisions for specific road types on the scale of Bavarian municipalities. Based on this risk model, we propose a new “deer–vehicle collision index” for deer management. We show that the risk of deer–vehicle collisions is positively correlated to browsing intensity and to harvest numbers. Overall, our results demonstrate that the number of deer–vehicle collisions can be predicted with high precision on the scale of municipalities. In the densely populated and intensively used landscapes of Central Europe and North America, a model-based risk assessment for deer–vehicle collisions provides a cost-efficient instrument for deer management on the landscape scale. The measures derived from our model provide valuable information for planning road protection and defining hunting quota. Open-source software implementing the model can be used to transfer our modelling approach to wildlife–vehicle collisions elsewhere

Active Suppression of Early Immune Response in Tobacco by the Human Pathogen Salmonella Typhimurium

The persistence of enteric pathogens on plants has been studied extensively, mainly due to the potential hazard of human pathogens such as Salmonella enterica being able to invade and survive in/on plants. Factors involved in the interactions between enteric bacteria and plants have been identified and consequently it was hypothesized that plants may be vectors or alternative hosts for enteric pathogens. To survive, endophytic bacteria have to escape the plant immune systems, which function at different levels through the plant-bacteria interactions. To understand how S. enterica survives endophyticaly we conducted a detailed analysis on its ability to elicit or evade the plant immune response. The models of this study were Nicotiana tabacum plants and cells suspension exposed to S. enterica serovar Typhimurium. The plant immune response was analyzed by looking at tissue damage and by testing oxidative burst and pH changes. It was found that S. Typhimurium did not promote disease symptoms in the contaminated plants. Live S. Typhimurium did not trigger the production of an oxidative burst and pH changes by the plant cells, while heat killed or chloramphenicol treated S. Typhimurium and purified LPS of Salmonella were significant elicitors, indicating that S. Typhimurium actively suppress the plant response. By looking at the plant response to mutants defective in virulence factors we showed that the suppression depends on secreted factors. Deletion of invA reduced the ability of S. Typhimurium to suppress oxidative burst and pH changes, indicating that a functional SPI1 TTSS is required for the suppression. This study demonstrates that plant colonization by S. Typhimurium is indeed an active process. S. Typhimurium utilizes adaptive strategies of altering innate plant perception systems to improve its fitness in the plant habitat. All together these results suggest a complex mechanism for perception of S. Typhimurium by plants