Synthesis of recyclable tire additives via equilibrium ring-opening metathesis polymerization

Linear <i>trans</i>-polypentenamers are highly desired materials among synthetic tire additives due to their comparable physical properties to natural rubber. <i>trans</i>-Polypentenamer can be prepared by equilibrium ring-opening metathesis polymerization (ROMP) using well-defined ruthenium catalyst systems. This unique feature of the equilibrium polymerization reaction opens a way for the synthesis of durable, environmentally benign elastomers where polymers including synthetic tire additives can be synthesized and readily recycled using the same transition metal catalyst system. The addition of silica fillers significantly improves the physical properties of the composite materials in comparison to the use of polymeric material. It is also known that the structural effects and the polymer–filler surface interaction are of prime importance. Herein, we report on the synthesis of silica filler compatible recyclable polypentenamer copolymers via equilibrium ROMP of cyclopentene <b>1</b> and 4-(triethoxy)­siloxy cyclopentene <b>11</b>. It has been demonstrated that polypentenamer tire additives can be synthesized via equilibrium ROMP affording polymers with high yields (>80%) at 0 °C and can be readily depolymerized at 40 °C and/or under diluted conditions using the same metathesis catalyst systems. Furthermore, the polypentenamer can also be synthesized in neat at room temperature and at very low (10⁵) monomer/catalyst ratio. This methodology is based on the synthesis of polyolefins utilizing a ruthenium-based metathesis catalyst via equilibrium ROMP of cyclopentenes and their silylated derivatives

Synthesis and Characterization of Soluble Thiophene-Selenophene- and Tellurophene-Vinylene Copolymers

Organic electronic devices based on polymers received significant attention in the last decade, especially for organic photovoltaics (OPVs) and field-effect transistors (OFETs) despite their performances and stability clearly falling short of today's state-of-the-art crystalline silicon or copper indium germanium selenide (CIGS)-based devices. Flexibility in the manufacturing, light weight, lower fabrication cost, ease of integration into various devices, and large area coating are some of the major potential advantages of polymers over inorganic devices. 1 Among organic polymers, conjugated polymers attracted widespread attention for a wide range of applications. Thiophene-containing conjugated polymers, especially, poly(3-alkylthiophne) (P3AT) has been subjected to intensive research over last decade due to their excellent optical and electronic properties. 2 Moreover, poly(thienylenevinylene) (PTV) class of polymers displays high charge carrier mobilities in OFETs and promising performances in OPVs. 3 When a single solubilizing alkyl chain is included onto the PTV backbone, the resulting copolymer can be solution processed for optical devices. One simple strategy to manipulate the copolymer property is by changing the heteroatom of the thiophene from sulfur to other chalcogens, selenium or tellurium. 4 Theoretical calculations indicated that substitution with selenium or tellurium may reduce the optical band gap of the resulting polymer in comparison to their sulfur-containing analogues. Inclusion of larger and more polarizable selenium or tellurium also expected to have a strong influence on the charge transport properties. Notably, Heeney and co-workers showed that the band gap of P3AT can be reduced by as much as 0.3 eV by only substituting sulfur with selenium in the polymer backbone. 5 The reduction of band gap resulted from larger and more polarizable selenium facilitate better π orbital overlap with the polymer backbone and thus stabilize the polymer LUMO (lowest unoccupied molecular orbital). Low-lying LUMO levels are believe to facilitate both electron injection and transport. Recently, PBDTT-SeDPP polymer showed a high Jsc of 16.8 mA/cm2, a Voc of 0.69 V, and a FF of 62%, enabling the best PCE of 7.2%. 6 However, despite fascinating properties of selenium substituted polymers, tellurium containing polymers are less explored, may be due to challenging tellurium chemistry. Jahnke and co-workers recently reported first soluble tellurophene polymer, poly(3-alkyltellurophene) (P3ATe), prepared by both electrochemical and Kumuda coupling polymerization method. 7 Even though, preliminary PCE (1.1%) was modest, tellurium substitution resulted in red-shifted film absorption. In this contribution, we report the synthesis and characterization of vinylene copolymers containing 3-alkylthiophene, selenophene or tellurophene. This allows us systematically investigate the role of selenium or tellurium on the polymer properties. Here, we report the first synthesis of novel 2,5-dibrominated 3-alkyltellurophene monomer and its Pd[0]-catalyzed copolymerization with (E)1,2-bis(tributylstannyl)ethylene to afford poly(3-alkyltellurophenylenevinylene) (P3ATeV). 8 We compare the optoelectronic properties of P3ATeV with analogous sulfur (P3ATV) and selenium (P3ASV) containing polymers. Preliminary OFET data will also be incorporated. Scheme 1. Structures of P3AX, P3AXV copolymers.Qscienc

Syntheses, structures, and stabilities of aliphatic and aromatic fluorous iodine(I) and iodine(III) compounds::the role of iodine Lewis basicity

The title molecules are sought in connection with various synthetic applications. The aliphatic fluorous alcohols RfnCH2OH (Rfn = CF3(CF2)n–1; n = 11, 13, 15) are converted to the triflates RfnCH2OTf (Tf2O, pyridine; 22–61%) and then to RfnCH2I (NaI, acetone; 58–69%). Subsequent reactions with NaOCl/HCl give iodine(III) dichlorides RfnCH2ICl2 (n = 11, 13; 33–81%), which slowly evolve Cl2. The ethereal fluorous alcohols CF3CF2CF2O(CF(CF3)CF2O)xCF(CF3)CH2OH (x = 2–5) are similarly converted to triflates and then to iodides, but efforts to generate the corresponding dichlorides fail. Substrates lacking a methylene group, RfnI, are also inert, but additions of TMSCl to bis(trifluoroacetates) RfnI(OCOCF3)2 appear to generate RfnICl2, which rapidly evolve Cl2. The aromatic fluorous iodides 1,3-Rf6C6H4I, 1,4-Rf6C6H4I, and 1,3-Rf10C6H4I are prepared from the corresponding diiodides, copper, and RfnI (110–130 °C, 50–60%), and afford quite stable RfnC6H4ICl2 species upon reaction with NaOCl/HCl (80–89%). Iodinations of 1,3-(Rf6)2C6H4 and 1,3-(Rf8CH2CH2)2C6H4 (NIS or I2/H5IO6) give 1,3,5-(Rf6)2C6H3I and 1,2,4-(Rf8CH2CH2)2C6H3I (77–93%). The former, the crystal structure of which is determined, reacts with Cl2 to give a 75:25 ArICl2/ArI mixture, but partial Cl2 evolution occurs upon work-up. The latter gives the easily isolated dichloride 1,2,4-(Rf8CH2CH2)2C6H3ICl2 (89%). The relative thermodynamic ease of dichlorination of these and other iodine(I) compounds is probed by DFT calculations

Polyisobutylene (PIB)-NHC Supported Catalysts for Cross-Coupling Reactions: A Green and Sustainable Protocol

N-Heterocyclic Carbenes (NHCs): Over the last two decades N-Heterocyclic carbenes (NHCs) have immensely attracted chemists in nearly all fields of chemistry. N-Heterocyclic carbenes are commonly encountered in coordination chemistry, they are extensively used as ligands for organometallic complexes. Perhaps the biggest hit of NHCs ligands was their use in Grubbs II catalyst for olefin metathesis chemistry. It is noteworthy that the success of NHCs ligands in catalysis is due to several factors favoring their high activity, selectivity and stability when compared to the phosphine counterparts in Grubbs I catalyst [1]. Supported Catalysts: Increased environmental and health awareness requires that designing new metal-catalysts should focus not only on increasing activity and selectivity but also on finding new strategies that help chemists recycle and separate the metal-catalyst from the reaction mixture. In general, homogenous catalysis is preferred over heterogeneous catalysis. This is due to the higher turnover number, better selectivity and usually lower operating temperatures required. On the other hand, heterogeneous catalysis has the advantage of the ease of separation of the catalyst from the final products and is generally less expensive. One important strategy is to use catalysts attached to a heterogeneous support and separate them from the products by simple filtration. Alternatively, homogeneous catalysts that can self-separate from the products by selective solvent extraction would be of great interest. The frequency of their reuse would be environmentally beneficial and to a higher extent this should overcome the lower activity of conventional heterogeneous catalysts. Metal catalysts that can self-separate from the reaction mixture are of great importance due to the reduced metal leaching into the product mixture. In addition, their reuse and recovery make this overall process much greener compared to the conventional homogeneous/heterogeneous catalysis systems. Ever since Herrmann et al. [2] reported the polystyrene supported NHC-palladium catalyst, studies have largely been focused on the use of polymeric supports for NHC-palladium catalysts. While polyethylene-glycol-supported catalyst can be extracted with a polar solvent, Bergbreiter et al. [3] and others have showed that polyisobutylene (PIB) is a useful support for ligands and their metal catalysts (Pd, Ru...) having preferable solubility towards solvents with low polarities such as hexanes, heptanes and decanes. In all of these biphasic systems for cross-coupling/olefin metathesis, the design is mainly focused on the recovery and the reuse of the supported catalysts. Biphasic catalysis having thermomorphic behavior have witnessed great developments due to their temperature-dependent miscibility [4]. While reactions in these biphasic mixtures can be conducted under homogeneous conditions at high-temperatures, the supported catalysts and the products/by-products can be efficiently separated by restoring the biphasic conditions at a low-temperature (Scheme 1). Herein we report the synthesis of new PIB-supported N-heterocyclic carbenes ligands having two different frameworks and their Pd-complexes, 1 and 2. The use, recovery and effectiveness of catalysts are detailed in both Heck and Suzuki cross-coupling reactions (Scheme 2). Metal leaching to the polar phase will be discussed too. Scheme 2: Heck cross-coupling and Suzuki cross-coupling using catalysts 1 and 2.qscienc

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries