Perovskite-perovskite tandem photovoltaics with optimized bandgaps

We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs

Assessing the suitability of copper thiocyanate as a hole-transport layer in inverted CsSnI3 perovskite photovoltaics

We report the fndings of a study into the suitability of copper (I) thiocyanate (CuSCN) as a hole-transport layer in inverted photovoltaic (PV) devices based on the black gamma phase (B-γ) of CsSnl3 perovskite. Remarkably, when B-γ-CsSnI3 perovskite is deposited from a dimethylformamide solution onto a 180–190nm thick CuSCN flm supported on an indium-tin oxide (ITO) electrode, the CuSCN layer is completely displaced leaving a perovskite layer with high uniformity and coverage of the underlying ITO electrode. This fnding is confrmed by detailed analysis of the thickness and composition of the film that remains after perovskite deposition, together with photovoltaic device studies. The results of this study show that, whilst CuSCN has proved to be an excellent hole-extraction layer for high performance lead-perovskite and organic photovoltaics, it is unsuitable as a hole-transport layer in inverted B-γCsSnI3 perovskite photovoltaics processed from solution

Metal halide perovskites for energy applications

Exploring prospective materials for energy production and storage is one of the biggest challenges of this century. Solar energy is one of the most important renewable energy resources, due to its wide availability and low environmental impact. Metal halide perovskites have emerged as a class of semiconductor materials with unique properties, including tunable bandgap, high absorption coefficient, broad absorption spectrum, high charge carrier mobility and long charge diffusion lengths, which enable a broad range of photovoltaic and optoelectronic applications. Since the first embodiment of perovskite solar cells showing a power conversion efficiency of 3.8%, the device performance has been boosted up to a certified 22.1% within a few years. In this Perspective, we discuss differing forms of perovskite materials produced via various deposition procedures. We focus on their energy-related applications and discuss current challenges and possible solutions, with the aim of stimulating potential new applications

Perceptions of complementary/alternative medicine use and influence on evidence-based asthma medicine adherence in Malaysian children

Abstract Complementary and alternative medicine (CAM) is widely used especially in Asia including for childhood asthma. The use of CAM could influence adherence to evidence-based (E-B) medicine. We explored the views of carers of Malaysian children with asthma regarding the use of CAM for childhood asthma, and its relationship with self-reported adherence to E-B medicine. We used a screening questionnaire to identify children diagnosed with asthma from seven suburban primary schools in Malaysia. Informed consent was obtained prior to the interviews. We conducted the interviews using a semi-structured topic guide in participants’ preferred language (Malay, Mandarin, or Tamil). All interviews were audio-recorded, transcribed verbatim and coded using Nvivo. Analysis was performed thematically, informed by the Necessity-Concerns Framework. A total of 46 carers (16 Malays, 21 Indians, 9 Chinese) contributed to 12 focus groups and one individual interview. We categorised participants’ as ‘Non-CAM’; ‘CAM’; or ‘combination’ user. Cultural practices and beliefs in the efficacy of CAM resulted in widespread use of CAM. Most carers used CAM as ‘complementary’ to E-B medicine. Concerns about dependence on or side effects of E-B treatment influenced carers’ decisions to rely on CAM as an ‘alternative’, with an important minority of accounts describing potentially harmful CAM-use. Healthcare professionals should discuss beliefs about the necessity for and concerns about use of both E-B medicine and CAM, and provide balanced information about effectiveness and safety. The aim is to improve adherence to regular E-B preventer medication and prevent delays in seeking medical advice and harmful practices associated with CAM

Integrated Hybrid Life Cycle Assessment and Supply Chain Environmental Profile Evaluations of Lead-based (Lead Zirconate Titanate) versus Lead-free (Potassium Sodium Niobate) Piezoelectric Ceramics

The increasing awareness of the environmental and health threats of lead as well as environmental legislation, both in the EU and around the world targeted at decreasing the use of hazardous substances in electrical appliances and products has reinvigorated the race to develop lead-free alternatives to lead zirconate titanate (PZT), which presently dominates the market for piezoelectric materials. Emphasis has been placed on one of the most likely piezoelectric materials, potassium sodium niobate (KNN), as a lead-free replacement for PZT. KNN has been speculated to have better environmental credentials and is considered as a “greener” replacement to PZT. However, a comparative environmental impact assessment of the life cycle phases of KNN versus PZT piezoelectric materials has not been carried out. Such a life cycle assessment is crucial before any valid claims of “greenness” or environmental viability of one material over the other can be made and is the focus of this paper. Against this backdrop, a methodologically robust life cycle supply chain assessment based on integrated hybrid life cycle framework is undertaken within the context of the two piezoelectric materials. Results show that the presence of niobium in KNN constitutes far greater impact across all the 16 categories considered in comparison with PZT. The increased environmental impact of KNN occurs in the early stages of the LCA due to raw material extraction and processing. As a result, the environmental damage has already occurred before its use in piezoelectric applications during which it doesn’t constitute any threat. As such, the use of the term “environmentally friendly” for the description of KNN should be avoided. Cost-benefit analysis of substituting PZT with KNN also indicates that the initial cost of conversion to KNN is greater, especially for energy usage during production. This environmental assessment has allowed us to define and address environmental health and safety as well as sustainability issues that are essential for future development of these materials. Overall, this work demonstrates insightful findings that can be garnered through the application of life cycle assessment and supply chain management to a strategic engineering question which allows industries and policy makers to make informed decisions regarding the environmental consequences of substitute materials, designs, fabrication processes and usage

Green fabrication of stable lead-free bismuth based perovskite solar cells using a non-toxic solvent

The very fast evolution in certified efficiency of lead-halide organic-inorganic perovskite solar cells to 24.2%, on par and even surpassing the record for polycrystalline silicon solar cells (22.3%), bears the promise of a new era in photovoltaics and revitalisation of thin film solar cell technologies. However, the presence of toxic lead and particularly toxic solvents during the fabrication process makes large-scale manufacturing of perovskite solar cells challenging due to legislation and environment issues. For lead-free alternatives, non-toxic tin, antimony and bismuth based solar cells still rely on up-scalable fabrication processes that employ toxic solvents. Here we employ non-toxic methyl-acetate solution processed (CH3NH3)3Bi2I9 films to fabricate lead-free, bismuth based (CH3NH3)3Bi2I9 perovskites on mesoporous TiO2 architecture using a sustainable route. Optoelectronic characterization, X-ray diffraction and electron microscopy show that the route can provide homogeneous and good quality (CH3NH3)3Bi2I9 films. Fine-tuning the perovskite/hole transport layer interface by the use of conventional 2,2′,7,7′-tetrakis (N,N′-di-p-methoxyphenylamino)−9,9′-spirbiuorene, known as Spiro-OMeTAD, and poly(3-hexylthiophene-2,5-diyl - P3HT as hole transporting materials, yields power conversion efficiencies of 1.12% and 1.62% under 1 sun illumination. Devices prepared using poly(3-hexylthiophene-2,5-diyl hole transport layer shown 300 h of stability under continuous 1 sun illumination, without the use of an ultra violet-filter

Perovskite solar cells: An integrated hybrid lifecycle assessment and review in comparison with other photovoltaic technologies

Solar cells are considered as one of the prominent sources of renewable energy suitable for large-scale adoption in a carbon-constrained world and can contribute to reduced reliance on energy imports, whilst improving the security of energy supply. A new arrival in the family of solar cells technologies is the organic-inorganic halide perovskite. The major thrust for endorsing these new solar cells pertains to their potential as an economically and environmentally viable option to traditional silicon-based technology. To verify this assertion, this paper presents a critical review of some existing photovoltaic (PV) technologies in comparison with perovskite-structured solar cells (PSCs), including material and performance parameters, production processes and manufacturing complexity, economics, key technological challenges for further developments and current research efforts. At present, there is limited environmental assessment of PSCs and consequently, a methodologically robust and environmentally expansive lifecycle supply chain assessment of two types of PSC modules A and B is also undertaken within the context of other PV technologies, to assess their potential for environmentally friendly innovation in the energy sector. Module A is based on MAPbX3 perovskite structure while module B is based on CsFAPbX3 with improved stability, reproducibility and high performance efficiency. The main outcomes, presented along with sensitivity analysis, show that PSCs offer more environmentally friendly and sustainable option, with the least energy payback period, as compared to other PV technologies. The review and analysis presented provide valuable insight and guidance in identifying pathways and windows of opportunity for future PV designs towards cleaner and sustainable energy production

Progress on lead-free metal halide perovskites for photovoltaic applications: a review

ABSTRACT: Metal halide perovskites have revolutionized the field of solution-processable photovoltaics. Within just a few years, the power conversion efficiencies of perovskite-based solar cells have been improved significantly to over 20%, which makes them now already comparably efficient to silicon-based photovoltaics. This breakthrough in solution-based photovoltaics, however, has the drawback that these high efficiencies can only be obtained with lead-based perovskites and this will arguably be a substantial hurdle for various applications of perovskite-based photovoltaics and their acceptance in society, even though the amounts of lead in the solar cells are low. This fact opened up a new research field on lead-free metal halide perovskites, which is currently remarkably vivid. We took this as incentive to review this emerging research field and discuss possible alternative elements to replace lead in metal halide perovskites and the properties of the corresponding perovskite materials based on recent theoretical and experimental studies. Up to now, tin-based perovskites turned out to be most promising in terms of power conversion efficiency; however, also the toxicity of these tin-based perovskites is argued. In the focus of the research community are other elements as well including germanium, copper, antimony, or bismuth, and the corresponding perovskite compounds are already showing promising properties. GRAPHICAL ABSTRACT: [Image: see text