Dynamical Casimir Effect for a Swinging Cavity

The resonant scalar particle generation for a swinging cavity resonator in the Casimir vacuum is examined. It is shown that the number of particles grows exponentially when the cavity rotates at some specific external frequency.Comment: to appear in J. Phys. A: Math. Theo

Seasonal variation of the cold intermediate water in the Southwestern Black Sea and its interaction with the Sea of Marmara during the period of 1996-1998

Seasonal variations of the cold intermediate water (CIW) in the southwestern Black Sea and its entrance into the Strait of Istanbul (Bosphorus) within the upper layer flow have been studied by using monthly oceanographic data sets collected in 1996-1998 period. In addition, the advection of the CIW via Strait Of Istanbul to the Sea of Marmara has been investigated.The CIW is a permanent and characteristic water mass of the Black Sea, markedly observed in the northwestern Black Sea. It is transported with the Rim Current along the boundary of the basin. The average temperature of the CIW is about 6o C. The 8oC isotherms defines its upper and lower boundaries. The upper boundary of CIW rises up to the 20 m depth in the shelf and coastal upwelling regions with a thickness of 40 m. On the other hand, the depth of the upper boundary may decrease down to 40 m with a thickness of 120 m in the anticyclonic regions.The CIW, located between 30 and 65m depths, was observed from April to September at the northern approaches of the Strait of Istanbul in the Black Sea. However, the CIW, within the Black Sea's upper layer flow, does not enter into the strait in the beginning (April, May) and at the end (September) of this period. The CIW between 20 and 50m water depths was observed in the northern entrance of the strait in summer (June, July and August) and it was carried into the strait by the southbound surface current. Its temperature increases southwards along the strait, due to the mixing with the warmer surface and bottom layers. This increment ranges between 2 and 4oC depending on the rate of mixing. The physically altered waters enter the Sea of Marmara with temperature of 11-14oC.In the Sea of Marmara, a residual cold intermediate layer (CIL) is observed in summer, it is just placed on top of the halocline. The average temperature of the upper layer increases from spring to autumn. In some months, however, there is a decrement in the average temperature of the upper layer. The altered CIW waters entering the Sea of Marmara may be responsible for this cooling

Mp3 Player Application Program Using Microsoft Visual Basic 6.0

The use of computers as a tool for solving human problems and human needs will be increasingly perceived entertainment. Technology contribute to many human lives. This is supported by the presence of other programming languages that support OOP (Object Oriented Programming). With the OOP techniques make it work programs become easier than before. Examples of programming languages that have supported this facility from Microsoft Visual Basic.In this writing, the author uses the Microsoft Visual Basic 6.0 to create an application program is intended for personal entertainment

Sea level changes along the Turkish coasts of the Black Sea, the Aegean Sea and the Eastern Mediterranean

Short, tidal, subtidal, seasonal, secular sea-level variations, sea-level differences and interactions between the basins have been studied, based on the data collected at some permanent and temporary tide gauges located along the Turkish coasts, mostly along the Straits connecting the Marmara Sea to outer seas. Even though the deficiency of sufficient information prevented us to reach the desired results, many pre-existed studies have been improved. Short-period oscillations were clearly identified along the Turkish Strait System and related to their natu-ral periods. The tidal amplitudes are low along the Turkish coasts, except northern Aegean and eastern Mediterranean. The stability of harmonic constants of Samsun and Antalya were examined and most of the long period constituents were found to be unstable. Even the Marmara Sea is not affected from the tidal oscillations of Black and Aegean Seas, some interactions in low frequency band have been detected. Subtidal sea level fluctuations (3-14 day) have relations with the large-scale cyclic atmospheric patterns passing over the Turkish Straits System. Short-term effects of wind on sea level are evident.Seasonal sea-level fluctuations along the Turkish Straits System are in accord with Black Sea's hydrological cycle. The differential range of the monthly mean sea levels between the Black Sea and the Marmara Sea is highly variable; high during spring and early summer and low during fall and winter.On the average, there is a pronounced sea-level difference (55 cm) along the Turkish Straits System. However, the slope is nonlinear, being much steeper in the Strait of Istanbul. This barotrophic pressure difference is one of the most important factors causing the two-layer flow through the system. The topography and hydrodynamics of the straits, the dominant wind systems and their seasonal variations make this flow more complicated. For secular sea level changes, a rise of 3.2 mm/a was computed for Karsiyaka (1935-71) and a steady trend (-0.4 mm /a) has been observed for annual sea levels at Antalya (1935-77). The decreasing trend (-6.9 mm/a) at Samsun is contrary to the secular rising trend of the Black Sea probably because of its rather short monitoring period (1963-77)

An enhancement to the Bees Algorithm with slope angle computation and Hill Climbing Algorithm and its applications on scheduling and continuous-type optimisation problem

This paper focuses on improvements to the Bees Algorithm (BA) with slope angle computation and Hill Climbing Algorithm (SACHCA) during the local search process. First, the SAC was employed to determine the inclination of the current sites. Second, according to the slope angle, the HCA was utilised to guide the algorithm to converge to the local optima. This enabled the global optimum of the given problem to be found faster and more precisely by focusing on finding the available local optima first before turning the attention on the global optimum. The proposed enhancements to the BA have been tested on continuous-type benchmark functions and compared with other optimisation techniques. The results show that the proposed algorithm performed better than other algorithms on most of the benchmark functions. The enhanced BA performs better than the basic BA, in particular on higher dimensional and complex optimisation problems. Finally, the proposed algorithm has been used to solve the single machine scheduling problem and the results show that the proposed SAC and HCA-BA outperformed the basic BA in almost all the considered instances, in particular when the complexity of the problem increases

Supply chain network design using an enhanced hybrid swarm-based optimization algorithm

This is the final version. Available from IGI Global via the DOI in this record. Supply chain network design is one of the most important strategic issues in operations management. The main objective in designing a supply chain is to keep the cost as low as possible. However, the modelling of a supply chain requires more than single-objective such as lead-time minimization, service level maximization, and environmental impact maximization among others. Usually these objectives may cause conflicts such as increasing the service level usually causes a growth in costs. Therefore, the aim should be to find trade-off solutions to satisfy the conflicting objectives. The aim of this chapter is to propose a new method based on a hybrid version of the Bees Algorithm with Slope Angle Computation and Hill Climbing Algorithm to solve a multi-objective supply chain network design problem. A real case from the literature has been selected and solved in order to show the potentiality of the proposed method in solving a large scale combinatorial problem

A Hybrid Method for The Closed-loop Supply Chain to Minimize Total Logistics Costs

This is the final version. Available on open access from the International Journal of Technology via the DOI in this recordCrow search algorithm for binary optimization (BinCSA) is currently used in some ideal models of the uncapacitated facility location problem (UFLP), but studies on its use in real-world supply chain cases remain limited. Therefore, this study aimed to address the gap by introducing a hybrid method that combined the BinCSA with an exact method to solve a CLSC problem, including location allocation, transportation, and supplier selection challenges. The initial sections of the study included theoretical foundations and experimental results of the BinCSA. Subsequently, how the BinCSA works in the proposed hybrid method was discussed, and the computational results were showed to evaluate the performance of the proposed method

A virtual collaborative platform to support building information modeling implementation for energy efficiency

There is increased interest in complying with the new regulations and policies associated with the climate change. In particular industries such as the AEC (Architecture, Engineering and Construction) industry seek to find new strategies and practices for facilitating sustainability but also new regulations to improve efficiency at the building level. Institutions and industrial bodies are now in the process of alignment with new legislative stipulations regarding carbon emissions with wider reflection into environment, social and economic models. At building level such strategies refer to decarbonisation and energy efficiency supported with data driven techniques enriched with virtual collaboration and optimization methods. The increased interest of the research community in Building Information Modeling (BIM) has facilitated numerous solutions ranging from digital products, information retrieval, and optimization techniques all aiming at addressing energy optimization and performance gap reduction. In this paper we present how a virtual collaborative system can be efficiently used for implementing BIM based energy optimization for controlling, monitoring buildings and running energy optimization, greatly contributing to creating a BIM construction community with energy practices. The solution described, known as energy-bim.com platform, disseminates energy efficient practices and community engagement and provides support for building managers in implementing energy efficient optimization plans

New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

We introduce five new biocompatible Ti-based metallic glass (MG) compositions with different metalloid and soft metal content for a synergistic improvement in corrosion properties. Without any potentially harmful elements such as Cu, Ni or Be, these novel alloys can eliminate the risk of inflammatory reaction when utilized for permanent medical implants. Excluding Cu, Ni or Be, which are essential for Ti-based bulk MG production, on the other hand, confines the glass-forming ability of novel alloys to a moderate level. In this study, toxic-element free MG alloys with significant metalloid (Si–Ge–B, 15–18 at.%) and minor soft element (Sn, 2–5 at.%) additions are produced in ribbon form using conventional single-roller melt spinning technique. Their glass-forming abilities and their structural and thermal properties are comparatively investigated using X-ray diffraction (XRD), synchrotron XRD and differential scanning calorimetry. Their corrosion resistance is ascertained in a biological solution to analyze their biocorrosion properties and compare them with other Ti-based bulk MGs along with energy dispersive X-ray. Ti60Zr20Si8Ge7B3Sn2 and Ti50Zr30Si8Ge7B3Sn2 MG ribbons present a higher pitting potential and passivation domain compared with other Ti-based MG alloys tested in similar conditions. Human mesenchymal stem cell metabolic activity and cytocompatibility tests confirm their outstanding cytocompatibility, outperforming Ti-Al6-V4