Electric Field Analysis of HDPE/NR Biocomposite Due to Moisture Content Condition

It is critical to develop new insulating materials that can improve the performance of next-generation high-voltage cables used in the construction of future electrical networks. The high electric field reduces solid insulation resistance and causes partial discharge through imperfections in a dielectric, causing the dielectric to age and eventually fail. Moisture is one of the most serious factors the effect the high voltage insulation status of High-Density Polyethylene (HDPE) composites. The main goal of this project is to investigate the electric field intensity of HDPE due to moisture content condition when mixed with 10g, 20g, and 30g of various bio-fillers such as coconut coir fibre, pineapple leaves fibre, and oil palm empty fruit bunch. This can be accomplished by using the Finite Element Method Magnetics (FEMM) 4.2 software to create a two-dimensional (2D) axisymmetric electrostatic model. When compared to unfilled HDPE, the inclusion of bio-filler in HDPE increased the maximum electric field intensity due to moisture content condition. The intensity of the electric field varied with the different percentages of biocomposite loading and their permittivity due to moisture content condition. The results showed, due to moisture content condition, the maximum electric field intensity was significantly lower when HDPE was added with a 10% loading of the oil palm empty fruit bunch (EFB). As a result, EFB bio-filler was the best composition because it tends to improve dielectric properties by having a lower maximum electric field intensity which is 4.214Mv/m due to moisture content condition at the top sphere electrode when compared to other compositions

The effect of bio-based additives on engine performance and emissions of petrol and diesel engine

Fuel additives are additives that are added to fuel in small quantities to give improvement in terms of engine performance and emissions. Aftermarket fuel additives can be divided into two, chemical-based and bio-based. In this project, the effect of bio-based fuel additives on engine performance and exhaust emissions of a petrol and diesel engine is studied. The blending ratio is developed based on the instruction given on the bottle of the additives. The ratio of the fuel additives used for Vivo Racing (VR) is between 0.21% and 0.25%, Vivo Flawless (VF) is between 0.10% and 0.14% and Diesel Energy is between 0.14% and 0.18%. Constant throttle test had been done on both petrol and diesel engine. The results show that the fuel additives reduce brake power and brake specific fuel consumption while increasing brake thermal efficiency and reducing exhaust emissions. For brake power, VR0.24 is the best. For brake specific fuel consumption, the best are VR0.23 and VF0.11 for petrol and diesel engine respectively. For brake thermal efficiency, the best are VR0.24 and DE0.17. For HC composition, the lowest are VR0.25 and DE0.17. For CO composition, VR0.22 and DE0.14 are the lowest. As for NOx, the lowest are VR0.25 and DE0.17

A study about terrestrial laser scanning for reconstruction of precast concrete to support QCLASSIC assessment

Nowadays, terrestrial laser scanning shows the potential to improve construction productivity by measuring the objects changes using real-time applications. This paper presents the process of implementation of an efficient framework for precast concrete using terrestrial laser scanning that enables contractors to acquire accurate data and support Quality Assessment System in Construction (QLASSIC). Leica Scanstation C10, black/white target, Autodesk Revit and Cyclone software were used in this study. The results were compared with the dimensional of based model precast concrete given by the company as a reference with the AutoDesk Revit model from the terrestrial laser scanning data and conventional method (measuring tape). To support QLASSIC, the tolerance dimensions of cast in-situ & precast elements is +10 mm /-5 mm. The results showed that the root mean square error for a Revit model is 2.972 mm while using measuring tape is 13.687 mm. The accuracy showed that terrestrial laser scanning has an advantage in construction jobs to support QLASSIC

Effects of Solvents on ZnO Nanoparticles Synthesis via Sol–gel Method

Zinc oxide nanoparticles have been prepared by the sol-gel method at different solvent (methanol (MeOH), ethanol (EtOh) and distilled water) and at different calcination temperatures (700 °C, 800 °C and 900 °C). The phase and microstructure of the prepared ZnO powder were investigated. ZnO powder were characterized by using XRD, EDX and FESEM. XRD analysis shows ZnO exhibited a hexagonal (wurtzite) structure with crystallite sizes 34.146 nm, 34.283 nm, and 34.523 nm and FESEM micrographs show that synthesized ZnO has a nanorod-like structure with an average particle size, 113.716 nm, 125.825 nm, and 141.725 nm for solvent methanol, ethanol and distilled water and calcination temperature of 700 °C, 800 °C and 700 °C respectively. The obtained ZnO nanoparticles are homogenous and consistent in size, corresponding to the XRD results that exhibit good crystallinity. EDX analysis shows pure ZnO with different solvents at 700 °C calcination temperatures. The surface of the ZnO also exhibits elements of O and Zn. This result has confirmed that the ZnO nanoparticles has high purity. Based on the analysis from the XRD and FESEM test, the best solvent with the best calcination temperature has been chosen, which is Methanol at 700 °C

Emerging development of nanocellulose as an antimicrobial material: An overview

The prolonged survival of microbes on surfaces in high-traffic/high-contact environments drives the need for a more consistent and passive form of surface sterilization to minimize the risk of infection. Due to increasing tolerance to antibiotics among microorganisms, research focusing on the discovery of naturally-occurring biocides with low-risk cytotoxicity properties has become more pressing. The latest research has centred on nanocellulosic antimicrobial materials due to their low-cost and unique features, which are potentially useful as wound dressings, drug carriers, packaging materials, filtration/adsorbents, textiles, and paint. This review discusses the latest literature on the fabrication of nanocellulose-based antimicrobial materials against viruses, bacteria, fungi, algae, and protozoa by employing variable functional groups, including aldehyde groups, quaternary ammonium, metal, metal oxide nanoparticles as well as chitosan. The problems associated with industrial manufacturing and the prospects for the advancement of nanocellulose-based antimicrobial materials are also addressed

Penghayatan sains dalam Al-Quran: Pengalaman perkongsian ilmu penyelidik PPAL (UMT) dengan sekolah Imtiaz Terengganu

Fakta Sains dan hubungannya dengan al-Quran adalah sangat berkait rapat. Pengetahuan yang jelas tentang wujudnya perkaitan Sains dan al-Quran dapat memupuk semangat cintakan ilmu dalam kalangan masyarakat Islam, selain mengukuhkan keimanan mereka kepada Allah.Kertas ini membincangkan pengalaman pengendalian program penghayatan ‘Cakna Sains Berteraskan Wahyu’ melalui perkongsian ilmu antara para penyelidik PPAL, UMT dengan pelajar sekolah Imtiaz yang terpilih.Program ini dijalankan berasaskan modul pengisian yang telah dibentuk sesuai dengan kepakaran penyelidik seperti slot ceramah, demonstrasi serta kuiz.Hasil pemerhatian ikut serta, serta respon yang diberikan pelajar melalui soalan kuiz dan perbincangan menunjukkan program perkongsian ini telah berjaya menarik minat pelajar menghayati kepentingan ilmu Sains secara Islamik.Perkongsian hasil penyelidikan yang dijalankan oleh para penyelidik PPAL berpandukan silibus pendidikan yang dipelajari oleh para pelajar sekolah Imtiaz turut menjadikan pengendalian program perkongsian ini menjadi lebih menarik

Ce anomaly in I‒type granitic soil from Kuantan, Peninsular Malaysia: retention of zircon in the weathering product

This paper describes the Ce anomaly observed in granitic soil from the humid, tropical area of Kuantan, Pahang, Peninsular Malaysia. Three granite rock soil profiles from Kuantan, were sampled and all samples were analysed for rare earth elements. All the profiles of the granitic soil samples show prominent positive Ce anomalies, with the Ce/Ce* ratio values (Ce/Ce*= CeN/√LaN.PrN) ranging from 1.2 to 125. l. Ce4+ is compatible in zircon because it has also the same charge and a similar ionic radius as to Zr4+ (Ce4+ = 0.97 Å; Zr4+ = 0.84 Å). The retention of zircon in the weathering product of the granitic rocks will increase the Ce content in the soil. Thus it is likely that the positive Ce anomaly in the REE profile of the Kuantan Granites may also have resulted from retention of zircon in the weathering product

The first Malay database toward the ethnic-specific target molecular variation

BACKGROUND:The Malaysian Node of the Human Variome Project (MyHVP) is one of the eighteen official Human Variome Project (HVP) country-specific nodes. Since its inception in 9(th) October 2010, MyHVP has attracted the significant number of Malaysian clinicians and researchers to participate and contribute their data to this project. MyHVP also act as the center of coordination for genotypic and phenotypic variation studies of the Malaysian population. A specialized database was developed to store and manage the data based on genetic variations which also associated with health and disease of Malaysian ethnic groups. This ethnic-specific database is called the Malaysian Node of the Human Variome Project database (MyHVPDb). FINDINGS:Currently, MyHVPDb provides only information about the genetic variations and mutations found in the Malays. In the near future, it will expand for the other Malaysian ethnics as well. The data sets are specified based on diseases or genetic mutation types which have three main subcategories: Single Nucleotide Polymorphism (SNP), Copy Number Variation (CNV) followed by the mutations which code for the common diseases among Malaysians. MyHVPDb has been open to the local researchers, academicians and students through the registration at the portal of MyHVP ( http://hvpmalaysia.kk.usm.my/mhgvc/index.php?id=register ). CONCLUSIONS:This database would be useful for clinicians and researchers who are interested in doing a study on genomics population and genetic diseases in order to obtain up-to-date and accurate information regarding the population-specific variations and also useful for those in countries with similar ethnic background

Burnout among surgeons before and during the SARS-CoV-2 pandemic: an international survey

Background: SARS-CoV-2 pandemic has had many significant impacts within the surgical realm, and surgeons have been obligated to reconsider almost every aspect of daily clinical practice. Methods: This is a cross-sectional study reported in compliance with the CHERRIES guidelines and conducted through an online platform from June 14th to July 15th, 2020. The primary outcome was the burden of burnout during the pandemic indicated by the validated Shirom-Melamed Burnout Measure. Results: Nine hundred fifty-four surgeons completed the survey. The median length of practice was 10 years; 78.2% included were male with a median age of 37 years old, 39.5% were consultants, 68.9% were general surgeons, and 55.7% were affiliated with an academic institution. Overall, there was a significant increase in the mean burnout score during the pandemic; longer years of practice and older age were significantly associated with less burnout. There were significant reductions in the median number of outpatient visits, operated cases, on-call hours, emergency visits, and research work, so, 48.2% of respondents felt that the training resources were insufficient. The majority (81.3%) of respondents reported that their hospitals were included in the management of COVID-19, 66.5% felt their roles had been minimized; 41% were asked to assist in non-surgical medical practices, and 37.6% of respondents were included in COVID-19 management. Conclusions: There was a significant burnout among trainees. Almost all aspects of clinical and research activities were affected with a significant reduction in the volume of research, outpatient clinic visits, surgical procedures, on-call hours, and emergency cases hindering the training. Trial registration: The study was registered on clicaltrials.gov "NCT04433286" on 16/06/2020

Burden of injury along the development spectrum : associations between the Socio-demographic Index and disability-adjusted life year estimates from the Global Burden of Disease Study 2017

Background The epidemiological transition of non-communicable diseases replacing infectious diseases as the main contributors to disease burden has been well documented in global health literature. Less focus, however, has been given to the relationship between sociodemographic changes and injury. The aim of this study was to examine the association between disability-adjusted life years (DALYs) from injury for 195 countries and territories at different levels along the development spectrum between 1990 and 2017 based on the Global Burden of Disease (GBD) 2017 estimates. Methods Injury mortality was estimated using the GBD mortality database, corrections for garbage coding and CODEm-the cause of death ensemble modelling tool. Morbidity estimation was based on surveys and inpatient and outpatient data sets for 30 cause-of-injury with 47 nature-of-injury categories each. The Socio-demographic Index (SDI) is a composite indicator that includes lagged income per capita, average educational attainment over age 15 years and total fertility rate. Results For many causes of injury, age-standardised DALY rates declined with increasing SDI, although road injury, interpersonal violence and self-harm did not follow this pattern. Particularly for self-harm opposing patterns were observed in regions with similar SDI levels. For road injuries, this effect was less pronounced. Conclusions The overall global pattern is that of declining injury burden with increasing SDI. However, not all injuries follow this pattern, which suggests multiple underlying mechanisms influencing injury DALYs. There is a need for a detailed understanding of these patterns to help to inform national and global efforts to address injury-related health outcomes across the development spectrum.Peer reviewe