505 research outputs found
A Case Study for Financial Feasibility of Automated Costing Support in A Small Machine Shop
A knowledge-based cost estimating expert system is chosen by a Mexican machine shop. Differences between the traditional experience-based system employed and the automated system are studied. Data is gathered to analyze time effectiveness, accuracy and payback of the software. Data from seventy part models is recorded to study the time experiment, and data from fifty part models is used to study the accuracy and consistency. Data is analyzed by calculating mean, standard deviation, and test of hypothesis. The results indicate that the software is faster than the traditional quoting system; however, the payback point is high. Also, results show the software has a smaller average time-to-manufacture percentage difference between the automated system and the actual time-to-manufacture (TTM) compared to the percentage difference between the traditional’s TTM and actual TTMs, and this difference is statistically significant. The standard deviation for the automated system is also less implying better consistency
Benefits of Implementing Automated Costing in a Small Machine Shop: A Case Study
Knowledge based cost estimating systems are available, but is there a lower limit to their applicability in an industrial environment? This paper answers this question by examining a knowledge based cost estimating expert system application in a small machine shop. Differences between the traditional experienced-based system currently employed and the automated system are studied. Data is gathered to analyze time effectiveness, accuracy, and payback of the software. Data from seventy part models is recorded to study the time experiment and data from fifty part models is used to study accuracy and consistency.The results indicate that the software is faster than traditional quoting systems; however, the payback point is high. Also, results show that the software has a smaller average time to manufacture percent difference between the automated system and the actual time to manufacture (TTM) compared to the percentage difference between the traditional TTM and actual TTM. Standard deviation for the automation is also less, implying better consistency. As a result, the attractiveness of the automated system in the limiting case of a small machine shop rests with significantly improved accuracy and consistency rather than payback.
PVDF/BaTiO3/carbon nanotubes ternary nanocomposites prepared by ball milling: Piezo and dielectric responses
Nanocomposites based on poly(vinylidene fluoride) (PVDF) filled with barium titanate, BaTiO3, (BT) particles, and multiwalled carbon nanotubes (MWCNTs) were prepared by high-energy ball milling (HEBM) and subsequent hot pressing. This method of materials preparation allowed obtaining uniform dispersions of the nanofillers. The influence of the particles on the polymer structure and morphology was studied. To understand the origin of changes in the PVDF properties, thermal and electrical behaviors of the PVDF/BT/MWCNT nanocomposites were studied as a function of composition. The addition of BT, MWCNT, or its mixture had not any influence on the PVDF polymorphism. However, calorimetric results pointed out that the presence of the nanofillers exerted nucleation mainly ascribed to the surface to volume ratio of the nanoparticles. The capacitance of the composites increased as the nanofiller content increased, being the effect mainly dependent on the surface to volume ratio of the nanoparticles. The dielectric behavior of the materials as a function of frequency was modeled by a Debye equivalent circuit only below the percolation threshold respect to the amount of MWCNT. The piezoelectric behavior of the ternary nanocomposites was highly affected by the incorporation of the nanofillers only when high dielectric losses occurred above the percolation threshold.The authors gratefully acknowledge the financial support from the Ministerio de Ciencia e Innovacion (MAT2010-16815) and the Ministerio de Asuntos Exteriores y de Cooperacion and the Agencia Espanola de Cooperacion Internacional para el Desarrollo for supporting the Ph.D. thesis of F.A.S
KV1.5–KV 1.3 Recycling Is PKC-Dependent
KV1.5 channel function is modified by different regulatory subunits. KVβ1.3 subunits assemble with KV1.5 channels and induce a fast and incomplete inactivation. Inhibition of PKC abolishes the KVβ1.3-induced fast inactivation, decreases the amplitude of the current KV1.5–KVβ1.3 and modifies their pharmacology likely due to changes in the traffic of KV1.5–KVβ1.3 channels in a PKC-dependent manner. In order to analyze this hypothesis, HEK293 cells were transfected with KV1.5–KVβ1.3 channels, and currents were recorded by whole-cell configuration of the patch-clamp technique. The presence of KV1.5 in the membrane was analyzed by biotinylation techniques, live cell imaging and confocal microscopy approaches. PKC inhibition resulted in a decrease of 33 ± 7% of channels in the cell surface due to reduced recycling to the plasma membrane, as was confirmed by confocal microscopy. Live cell imaging indicated that PKC inhibition almost abolished the recycling of the KV1.5–KVβ1.3 channels, generating an accumulation of channels into the cytoplasm. All these results suggest that the trafficking regulation of KV1.5–KVβ1.3 channels is dependent on phosphorylation by PKC and, therefore, they could represent a clinically relevant issue, mainly in those diseases that exhibit modifications in PKC activity.This research was funded by Ministerio de Ciencia e Innovación (MICINN) Spain SAF2016-75021-R and PID2019-104366RB-C21 (to C.V. and T.G.), the Instituto de Salud Carlos III CIBERCV program CB/11/00222 (to C.V.), and the Consejo Superior de Investigaciones Científicas grants: PIE 201820E104 and 2019AEP148 (to C.V.). The cost of this publication was paid in part by funds from the European Fund for Economic and Regional Development (FEDER). A.M. holds a postdoctoral contract at CNIC. A.d.l.C. and D.A.P. held CSIC contracts. A.d.B.-B. holds an MICINN predoctoral contract (BES-2017-080184
Resolving galaxies in time and space: II: Uncertainties in the spectral synthesis of datacubes
In a companion paper we have presented many products derived from the
application of the spectral synthesis code STARLIGHT to datacubes from the
CALIFA survey, including 2D maps of stellar population properties and 1D
averages in the temporal and spatial dimensions. Here we evaluate the
uncertainties in these products. Uncertainties due to noise and spectral shape
calibration errors and to the synthesis method are investigated by means of a
suite of simulations based on 1638 CALIFA spectra for NGC 2916, with
perturbations amplitudes gauged in terms of the expected errors. A separate
study was conducted to assess uncertainties related to the choice of
evolutionary synthesis models. We compare results obtained with the Bruzual &
Charlot models, a preliminary update of them, and a combination of spectra
derived from the Granada and MILES models. About 100k CALIFA spectra are used
in this comparison.
Noise and shape-related errors at the level expected for CALIFA propagate to
0.10-0.15 dex uncertainties in stellar masses, mean ages and metallicities.
Uncertainties in A_V increase from 0.06 mag in the case of random noise to 0.16
mag for shape errors. Higher order products such as SFHs are more uncertain,
but still relatively stable. Due to the large number statistics of datacubes,
spatial averaging reduces uncertainties while preserving information on the
history and structure of stellar populations. Radial profiles of global
properties, as well as SFHs averaged over different regions are much more
stable than for individual spaxels. Uncertainties related to the choice of base
models are larger than those associated with data and method. Differences in
mean age, mass and metallicity are ~ 0.15 to 0.25 dex, and 0.1 mag in A_V.
Spectral residuals are ~ 1% on average, but with systematic features of up to
4%. The origin of these features is discussed. (Abridged)Comment: A&A, accepte
Use of Schizosaccharomyces strains for wine fermentation? Effect on the wine composition and food safety
Schizosaccharomyceswas initially considered as a spoilage yeast because of the production of undesirable metabolites such as acetic acid, hydrogen sulfide, or acetaldehyde, but it currently seems to be of great value in enology.o ced Nevertheless, Schizosaccharomyces can reduce all of the malic acid in must, leading to malolactic fermentation. Malolactic fermentation is a highly complicated process in enology and leads to a higher concentration of biogenic amines, so the use of Schizosaccharomyces pombe can be an excellent tool for assuring wine safety. Schizosaccharomyces also has much more potential than only reducing the malic acid content, such as increasing the level of pyruvic acid and thus the vinylphenolic pyranoanthocyanin content. Until now, few commercial strains have been available and little research on the selection of appropriate yeast strains with such potential has been conducted. In this study, selected and wild Sc. pombe strains were used along with a Saccharomyces cerevisiae strain to ferment red grape must. The results showed significant differences in several parameters including non-volatile and volatile compounds, anthocyanins, biogenic amines and sensory parameters
Complementarity effects on tree growth are contingent on tree size and climatic conditions across Europe
Although sustainable development was defined in the Brundtland Report almost 30 years ago, the current usage of the concepts of sustainability and sustainable development remain highly equivocal. In the context of rural communities, multiple interpretations and weak definitions lead to confusion in understanding what comprises a sustainable rural community. Building on existing definitions (e.g. Baker's, 2006, ‘Ladder of Sustainable Development'), models (principally, The Egan Review's, 2004, ‘Components of Sustainable Communities') and findings of this study, a sustainable community is defined and a holistic model of a sustainable place-based rural community is presented. This model, the sustainable community design (SCD) is used as the basis for analysing community sustainability, which is measured using mixed methods and scorecard assessment. Sensitivity of the method is demonstrated with inter- and intra-community variations in sustainability across three diverse Scottish rural communities. Intra-community variations illustrate heterogeneity in community sustainability, explain ambiguity in characterisations of an individual community's sustainability, and highlight the importance of an interdisciplinary and holistic approach to community development. The SCD framework is presented as a useful tool for meso-level sustainability assessment and to facilitate the sustainable development of rural communities
Stellar Population gradients in galaxy discs from the CALIFA survey
While studies of gas-phase metallicity gradients in disc galaxies are common,
very little has been done in the acquisition of stellar abundance gradients in
the same regions. We present here a comparative study of the stellar
metallicity and age distributions in a sample of 62 nearly face-on, spiral
galaxies with and without bars, using data from the CALIFA survey. We measure
the slopes of the gradients and study their relation with other properties of
the galaxies. We find that the mean stellar age and metallicity gradients in
the disc are shallow and negative. Furthermore, when normalized to the
effective radius of the disc, the slope of the stellar population gradients
does not correlate with the mass or with the morphological type of the
galaxies. Contrary to this, the values of both age and metallicity at 2.5
scale-lengths correlate with the central velocity dispersion in a similar
manner to the central values of the bulges, although bulges show, on average,
older ages and higher metallicities than the discs. One of the goals of the
present paper is to test the theoretical prediction that non-linear coupling
between the bar and the spiral arms is an efficient mechanism for producing
radial migrations across significant distances within discs. The process of
radial migration should flatten the stellar metallicity gradient with time and,
therefore, we would expect flatter stellar metallicity gradients in barred
galaxies. However, we do not find any difference in the metallicity or age
gradients in galaxies with without bars. We discuss possible scenarios that can
lead to this absence of difference.Comment: 24 pages, 17 figures, accepted for publication in A&
- …