Process intensification for post combustion CO₂ capture with chemical absorption: a critical review

The concentration of CO₂ in the atmosphere is increasing rapidly. CO₂ emissions may have an impact on global climate change. Effective CO₂ emission abatement strategies such as carbon capture and storage (CCS) are required to combat this trend. Compared with pre-combustion carbon capture and oxy-fuel carbon capture approaches, post-combustion CO₂ capture (PCC) using solvent process is one of the most mature carbon capture technologies. There are two main barriers for the PCC process using solvent to be commercially deployed: (a) high capital cost; (b) high thermal efficiency penalty due to solvent regeneration. Applying process intensification (PI) technology into PCC with solvent process has the potential to significantly reduce capital costs compared with conventional technology using packed columns. This paper intends to evaluate different PI technologies for their suitability in PCC process. The study shows that rotating packed bed (RPB) absorber/stripper has attracted much interest due to its high mass transfer capability. Currently experimental studies on CO₂ capture using RPB are based on standalone absorber or stripper. Therefore a schematic process flow diagram of intensified PCC process is proposed so as to motivate other researches for possible optimal design, operation and control. To intensify heat transfer in reboiler, spinning disc technology is recommended. To replace cross heat exchanger in conventional PCC (with packed column) process, printed circuit heat exchanger will be preferred. Solvent selection for conventional PCC process has been studied extensively. However, it needs more studies for solvent selection in intensified PCC process. The authors also predicted research challenges in intensified PCC process and potential new breakthrough from different aspects

The numerical evaluation of the grinding process and the basic mechanics of grinding wheel wear

During the production process development for the manufacture of an experimental supersonic aircraft , an unusual and difficult grinding problem was encountered. Arising from the experimental work carried out to solve this problem, a method of numerically evaluating the efficiency of grinding wheels and coolants, was developed. This evaluation is based on the fact that under constant and limited grit load conditions which can be set up in a surface grinding operation, the edge of the grinding wheel which makes initial contact with the workpiece breaks down and forms an approach angle as shown in Fig. 1. Once this angle is established, its dimensions remain almost constant, and with continued use of the wheel the angle recedes across the face of the wheel. It is the recognition of the variables which control the dimensions of this approach angle (alpha) together with the rate at which it recedes across the wheel face, and the amount of work done at each increment of recession, on which the numerical evaluation of the efficiency of the grinding wheel and the causes of the limitations are based. A description of the methods used for determining the characteristics of grinding wheels and coolants are included together with the calculations which are necessary when the data obtained from tests carried out on the surface grinding machine are to be interpreted and applied to the cylinder grinding internal grinding or form grinding processes

Modeling Fixed Bed Membrane Reactors for Hydrogen Production through Steam Reforming Reactions: A Critical Analysis

Membrane reactors for hydrogen production have been extensively studied in the past years due to the interest in developing systems that are adequate for the decentralized production of high-purity hydrogen. Research in this field has been both experimental and theoretical. The aim of this work is two-fold. On the one hand, modeling work on membrane reactors that has been carried out in the past is presented and discussed, along with the constitutive equations used to describe the different phenomena characterizing the behavior of the system. On the other hand, an attempt is made to shed some light on the meaning and usefulness of models developed with different degrees of complexity. The motivation has been that, given the different ways and degrees in which transport models can be simplified, the process is not always straightforward and, in some cases, leads to conceptual inconsistencies that are not easily identifiable or identified

Becoming PBRF-able: Research assessment and education in New Zealand

It seems ironic that, designed as they are to quantify, evaluate and reward the research quantum of academic institutions, departments and individuals, research assessment exercises have themselves become objects of their research and critique. As many in this volume and elsewhere attest, the impact of research assessment runs deeper than mere measurement of “what is already there”: such processes are productive, or formative (Henkel, 2005, McNay, 2003; Sikes, 2006). Of course bringing about change is intended in the sense of increasing research quantity, enhancing its quality, etc. However, there are suggestions that by changing the conditions of knowledge production, research assessment exercises may also alter the shape and direction of disciplines by diverting and channelling researchers’ intellectual attention and political engagement, influencing what they study, how they do it, and how they report and write (Beck and Yong, 2005; Bernstein, 2000)

Influence of contrast media dose and osmolality on the diagnostic performance of contrast fractional flow reserve

Background—Contrast fractional flow reserve (cFFR) is a method for assessing functional significance of coronary stenoses, which is more accurate than resting indices and does not require adenosine. However, contrast media volume and osmolality may affect the degree of hyperemia and therefore diagnostic performance. Methods and Results—cFFR, instantaneous wave–free ratio, distal pressure/aortic pressure at rest, and FFR were measured in 763 patients from 12 centers. We compared the diagnostic performance of cFFR between patients receiving low or iso-osmolality contrast (n=574 versus 189) and low or high contrast volume (n=341 versus 422) using FFR≤0.80 as a reference standard. The sensitivity, specificity, and overall accuracy of cFFR for the low versus iso-osmolality groups were 73%, 93%, and 85% versus 87%, 90%, and 89%, and for the low versus high contrast volume groups were 69%, 99%, and 83% versus 82%, 93%, and 88%. By receiver operating characteristics (ROC) analysis, cFFR provided better diagnostic performance than resting indices regardless of contrast osmolality and volume (P<0.001 for all groups). There was no significant difference between the area under the curve of cFFR in the low- and iso-osmolality groups (0.938 versus 0.957; P=0.40) and in the low- and high-volume groups (0.939 versus 0.949; P=0.61). Multivariable logistic regression analysis showed that neither contrast osmolality nor volume affected the overall accuracy of cFFR; however, both affected the sensitivity and specificity. Conclusions—The overall accuracy of cFFR is greater than instantaneous wave–free ratio and distal pressure/aortic pressure and not significantly affected by contrast volume and osmolality. However, contrast volume and osmolality do affect the sensitivity and specificity of cFFR

Hydrological Alteration Index as an Indicator of the Calibration Complexity of Water Quantity and Quality Modeling in the Context of Global Change

Modeling is a useful way to understand human and climate change impacts on the water resources of agricultural watersheds. Calibration and validation methodologies are crucial in forecasting assessments. This study explores the best calibration methodology depending on the level of hydrological alteration due to human-derived stressors. The Soil and Water Assessment Tool (SWAT) model is used to evaluate hydrology in South-West Europe in a context of intensive agriculture and water scarcity. The Index of Hydrological Alteration (IHA) is calculated using discharge observation data. A comparison of two SWAT calibration methodologies are done; a conventional calibration (CC) based on recorded in-stream water quality and quantity and an additional calibration (AC) adding crop managements practices. Even if the water quality and quantity trends are similar between CC and AC, water balance, irrigation and crop yields are different. In the context of rainfall decrease, water yield decreases in both CC and AC, while crop productions present opposite trends (+33% in CC and -31% in AC). Hydrological performance between CC and AC is correlated to IHA: When the level of IHA is under 80%, AC methodology is necessary. The combination of both calibrations appears essential to better constrain the model and to forecast the impact of climate change or anthropogenic influences on water resources