Dielectric Breakdown in Chemical Vapor Deposited Hexagonal Boron Nitride

Insulating films are essential in multiple electronic devices because they can provide essential functionalities, such as capacitance effects and electrical fields. Two-dimensional (2D) layered materials have superb electronic, physical, chemical, thermal, and optical properties, and they can be effectively used to provide additional performances, such as flexibility and transparency. 2D layered insulators are called to be essential in future electronic devices, but their reliability, degradation kinetics, and dielectric breakdown (BD) process are still not understood. In this work, the dielectric breakdown process of multilayer hexagonal boron nitride (h-BN) is analyzed on the nanoscale and on the device level, and the experimental results are studied via theoretical models. It is found that under electrical stress, local charge accumulation and charge trapping/detrapping are the onset mechanisms for dielectric BD formation. By means of conductive atomic force microscopy, the BD event was triggered at several locations on the surface of different dielectrics (SiO2, HfO2, Al2O3, multilayer h-BN, and monolayer h-BN); BD-induced hillocks rapidly appeared on the surface of all of them when the BD was reached, except in monolayer h-BN. The high thermal conductivity of h-BN combined with the one-atom-thick nature are genuine factors contributing to heat dissipation at the BD spot, which avoids self-accelerated and thermally driven catastrophic BD. These results point to monolayer h-BN as a sublime dielectric in terms of reliability, which may have important implications in future digital electronic devices.Fil: Jiang, Lanlan. Soochow University; ChinaFil: Shi, Yuanyuan. Soochow University; China. University of Stanford; Estados UnidosFil: Hui, Fei. Soochow University; China. Massachusetts Institute of Technology; Estados UnidosFil: Tang, Kechao. University of Stanford; Estados UnidosFil: Wu, Qian. Soochow University; ChinaFil: Pan, Chengbin. Soochow University; ChinaFil: Jing, Xu. Soochow University; China. University of Texas at Austin; Estados UnidosFil: Uppal, Hasan. University of Manchester; Reino UnidoFil: Palumbo, Félix Roberto Mario. Comisión Nacional de Energía Atómica; Argentina. Universidad Tecnológica Nacional; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Lu, Guangyuan. Chinese Academy of Sciences; República de ChinaFil: Wu, Tianru. Chinese Academy of Sciences; República de ChinaFil: Wang, Haomin. Chinese Academy of Sciences; República de ChinaFil: Villena, Marco A.. Soochow University; ChinaFil: Xie, Xiaoming. Chinese Academy of Sciences; República de China. ShanghaiTech University; ChinaFil: McIntyre, Paul C.. University of Stanford; Estados UnidosFil: Lanza, Mario. Soochow University; Chin

Dielectric relaxation and Charge trapping characteristics study in Germanium based MOS devices with HfO2 /Dy2O3 gate stacks

In the present work we investigate the dielectric relaxation effects and charge trapping characteristics of HfO2 /Dy2O3 gate stacks grown on Ge substrates. The MOS devices have been subjected to constant voltage stress (CVS) conditions at accumulation and show relaxation effects in the whole range of applied stress voltages. Applied voltage polarities as well as thickness dependence of the relaxation effects have been investigated. Charge trapping is negligible at low stress fields while at higher fields (>4MV/cm) it becomes significant. In addition, we give experimental evidence that in tandem with the dielectric relaxation effect another mechanism- the so-called Maxwell-Wagner instability- is present and affects the transient current during the application of a CVS pulse. This instability is also found to be field dependent thus resulting in a trapped charge which is negative at low stress fields but changes to positive at higher fields.Comment: 27pages, 10 figures, 3 tables, regular journal contribution (accepted in IEEE TED, Vol.50, issue 10

Probing interface defects in top-gated MoS2 transistors with impedance spectroscopy

The electronic properties of the HfO2/MoS2 interface were investigated using multifrequency capacitance–voltage (C–V) and current–voltage characterization of top-gated MoS2 metal–oxide–semiconductor field effect transistors (MOSFETs). The analysis was performed on few layer (5–10) MoS2 MOSFETs fabricated using photolithographic patterning with 13 and 8 nm HfO2 gate oxide layers formed by atomic layer deposition after in-situ UV-O3 surface functionalization. The impedance response of the HfO2/MoS2 gate stack indicates the existence of specific defects at the interface, which exhibited either a frequency-dependent distortion similar to conventional Si MOSFETs with unpassivated silicon dangling bonds or a frequency dispersion over the entire voltage range corresponding to depletion of the HfO2/MoS2 surface, consistent with interface traps distributed over a range of energy levels. The interface defects density (Dit) was extracted from the C–V responses by the high–low frequency and the multiple-frequency extraction methods, where a Dit peak value of 1.2 × 1013 cm–2 eV–1 was extracted for a device (7-layer MoS2 and 13 nm HfO2) exhibiting a behavior approximating to a single trap response. The MoS2 MOSFET with 4-layer MoS2 and 8 nm HfO2 gave Dit values ranging from 2 × 1011 to 2 × 1013 cm–2 eV–1 across the energy range corresponding to depletion near the HfO2/MoS2 interface. The gate current was below 10–7 A/cm2 across the full bias sweep for both samples indicating continuous HfO2 films resulting from the combined UV ozone and HfO2 deposition process. The results demonstrated that impedance spectroscopy applied to relatively simple top-gated transistor test structures provides an approach to investigate electrically active defects at the HfO2/MoS2 interface and should be applicable to alternative TMD materials, surface treatments, and gate oxides as an interface defect metrology tool in the development of TMD-based MOSFETs

Electrical characterization of high-k gate dielectrics for advanced CMOS gate stacks

The oxide/substrate interface quality and the dielectric quality of metal oxide semiconductor (MOS) gate stack structures are critical to future CMOS technology. As SiO2 was replaced by the high-k dielectric to further equivalent oxide thickness (EOT), high mobility substrates like Ge have attracted increasing in replacing Si substrate to further enhance devices performance. Precise control of the interface between high-k and the semiconductor substrate is the key of the high performance of future transistor. In this study, traditional electrical characterization methods are used on these novel MOS devices, prepared by advanced atomic layer deposition (ALD) process and with pre and post treatment by plasma generated by slot plane antenna (SPA). MOS capacitors with a TiN metal gate/3 nm HfAlO/0.5 nm SiO2/Si stacks were fabricated by different Al concentration, and different post deposition treatments. A simple approach is incorporated to correct the error, introduced by the series resistance (Rs) associated with the substrate and metal contact. The interface state density (Dit), calculated by conductance method, suggests that Dit is dependent on the crystalline structure of hafnium aluminum oxide film. The amorphous structure has the lowest Dit whereas crystallized HfO2 has the highest Dit. Subsequently, the dry and wet processed interface layers for three different p type Ge/ALD 1nm-Al2O3/ALD 3.5nm-ZrO2/ALD TiN gate stacks are studied at low temperatures by capacitance-voltage (CV),conductance-voltage (GV) measurement and deep level transient spectroscopy (DLTS). Prior to high-k deposition, the interface is treated by three different approaches (i) simple chemical oxidation (Chemox); (ii) chemical oxide removal (COR) followed by 1 nm oxide by slot-plane-antenna (SPA) plasma (COR&SPAOx); and (iii) COR followed by vapor O3 treatment (COR&O3). Room temperature measurement indicates that superior results are observed for slot-plane-plasma-oxidation processed samples. The reliability of TiN/ZrO2/Al2O3/p-Ge gate stacks is studied by time dependent dielectric breakdown (TDDB). High-k dielectric is subjected to the different slot plane antenna oxidation (SPAO) processes, namely, (i) before high-k ALD (Atomic Layer Deposition), (ii) between high-k ALD, and (iii) after high-k ALD. High-k layer and interface states are improved due to the formation of GeO2 by SPAO when SPAO is processed after high-k. GeO2 at the interface can be degraded easily by substrate electron injection. When SPAO is processed between high-k layers, a better immunity of interface to degradation was observed under stress. To further evaluate the high-k dielectrics and how EOT impacts on noise mechanism time zero 1/f noise is characterized on thick and thin oxide FinFET transistors, respectively. The extracted noise models suggest that as a function of temperatures and bias conditions the flicker noise mechanism tends to be carrier number fluctuation model (McWhorter model). Furthermore, the noise mechanism tends to be mobility fluctuation model (Hooge model) when EOT reduces

Reliability Studies of TiN/Hf-Silicate Based Gate Stacks

Hafnium-silicate based oxides are among the leading candidates to be included into the first generation of high-Κ gate stacks in nano-scale CMOS technology because of their distinct advantages as far as thermal stability, leakage characteristics, threshold stability and low mobility degradation are concerned. Their reliability, which is limited by trapping at pre-existing and stress induced defects, remains to be a major concern. Energy levels of electrically active ionic defects within the thick high-Κ have been experimentally observed in the context of MOS band diagram for the first time in Hf-silicate gate stacks from low temperature and leakage measurements. Excellent match between experimental and calculated defect levels shows that bulk O vacancies are probably responsible for electron trapping at both shallow and deep levels. Their role in trapping and transport under different gate polarity and band bending conditions has been determined. For gate injection, electron transport through mid-gap states dominates, which leads to slow transient trapping at deep levels. Under substrate injection field and temperature dependent transport through conduction-edge shallow levels or trap-assisted tunneling due to negative- U transition occurs depending on bias condition. The former gives rise to fast transient trapping, whereas the latter is responsible for slow transient trapping. Mixed degradation, due to trapping of both electrons and holes in the trap levels within the bulk high-K, was observed under constant voltage stress (CVS) applied on n-channel MOS capacitors with negative bias condition. Mixed degradation resulted in turn-around effect in flat-band voltage shift (ΔFB) with respect to stress time. Under CVS with positive bias, applied on nMOSFETs, lateral distribution of trapped charges in the deep levels causes turn-around effect in threshold voltage shift (ΔVT) with respect to stress levels. For the incident carrier energies above the calculated 0 vacancy formation threshold and thick high-Κ layer, both flatband voltage shift, due to electron trapping at the deep levels, and increase in leakage current during stress follow tn(n ≈ 0.4) power-law dependence under substrate hot electron injection. Negative-U transitions to deep levels are shown to be responsible for the strong correlation between slow transient trapping and trap assisted tunneling. As far as negative bias temperature instability, NBTI effects on pMOSFETs is concerned, ΔVT is due to the mixed degradation within the bulk high-Κ for low bias conditions. For moderately high bias, ΔVT shows an excellent match with that of SiO, based devices, which is explained by reaction-diffusion (R-D) model of NBTL. Under high bias condition at elevated temperatures, due to high Si-H bond-annealing/bond-breaking ratio, the experimentally observed absence of the impact ionization induced hot holes at the interfacial layer (IL)/Si interface probably limits the interface state generation and ΔVT as they quickly reach saturation. Time-zero dielectric breakdown (TZBD) characteristics of TiN/HfO2 based gate stacks show that thickness and growth conditions significantly affect the BD field of IL. For the thin high-w layers, BD of IL triggers BD of the gate stack. Otherwise, BD of high-w layer initiates it. During time dependent dielectric breakdown, TDDB, four regimes of degradation are observed under CVS with high gate bias conditions: (i) charge trapping/defect generation, (ii) soft breakdown (SBD), (iii) progressive breakdown and (iv) hard breakdown (HBD). Activation energy of bond-breakage, found from Arrhenius plots of 63% failure value of TBD, shows that IL degradation triggers gate stacks BD, and the wear-out during TDDB

Reliability study of Zr and Al incorporated hf based high-k dielectric deposited by advanced processing

Hafnium-based high-x dielectric materials have been successfully used in the industry as a key replacement for SiO2 based gate dielectrics in order to continue CMOS device scaling to the 22-nm technology node. Further scaling according to the device roadmap requires the development of oxides with higher x values in order to scale the equivalent oxide thickness (EOT) to 0.7 nm or below while achieving low defect densities. In addition, next generation devices need to meet challenges like improved channel mobility, reduced gate leakage current, good control on threshold voltage, lower interface state density, and good reliability. In order to overcome these challenges, improvements of the high-x film properties and deposition methods are highly desirable. In this dissertation, a detail study of Zr and Al incorporated HfO2 based high-κ dielectrics is conducted to investigate improvement in electrical characteristics and reliability. To meet scaling requirements of the gate dielectric to sub 0.7 nm, Zr is added to HfO2 to form Hf1-xZrxO2 with x=0, 0.31 and 0.8 where the dielectric film is deposited by using various intermediate processing conditions, like (i) DADA: intermediate thermal annealing in a cyclical deposition process; (ii) DSDS: similar cyclical process with exposure to SPA Ar plasma; and (iii) As-Dep: the dielectric deposited without any intermediate step. MOSCAPs are formed with TiN metal gate and the reliability of these devices is investigated by subjecting them to a constant voltage stress in the gate injection mode. Stress induced flat-band voltage shift (ΔVFB), stress induced leakage current (SILC) and stress induced interface state degradation are observed. DSDS samples demonstrate the superior characteristics whereas the worst degradation is observed for DADA samples. Time dependent dielectric breakdown (TDDB) shows that DSDS Hf1-xZrxO2 (x=0.8) has the superior characteristics with reduced oxygen vacancy, which is affiliated to electron affinity variation in HfO2 and ZrO2. The trap activation energy levels estimated from the temperature dependent current voltage characteristics also support the observed reliability characteristics for these devices. In another experiment, HfO2 is lightly doped with Al with a variation in Al concentration by depositing intermediate HfAlOx layers. This work has demonstrated a high quality HfO2 based gate stack by depositing atomic layer deposited (ALD) HfAlOx along with HfO2 in a layered structure. In order to get multifold enhancement of the gate stack quality, both Al percentage and the distribution of Al are observed by varying the HfAlOx layer thickness and it is found that \u3c 2% Al/(Al+Hf)% incorporation can result in up to 18% reduction in the average EOT along with up to 41 % reduction in the gate leakage current as compared to the dielectric with no Al content. On the other hand, excess Al presence in the interfacial layer moderately increases the interface state density (Dit). When devices are stressed in the gate injection mode at a constant voltage stress, dielectrics with Al/(Hf+Al)% \u3c 2% show resistance to stress induced flat-band voltage shift (ΔVFB), and stress induced leakage current (SILC). The time dependent dielectric breakdown (TDDB) characteristics show a higher charge to breakdown and an increase in the extracted Weibull slope (β) that further confirms an enhanced dielectric reliability for devices with \u3c 2% Al/(Al+Hf)%

INVESTIGATION OF CHARGE TRAPS AT Al-DOPED HfO2/(100)InGaAs INTERFACE BY USING CAPACITANCE AND CONDUCTANCE METHODS

In this study, capacitance and conductance methods were used to investigate the charge traps at a HfO2/(100)InGaAs interface with an atomic layer deposition HfO2 layer doped with Al2O3 by co-deposition technique. The effect of Al doping on the quality of the HfO2/In0.53Ga0.47As interface will be evaluated. The density of interface traps (D­it) near In0.53Ga0.47As midgap is close to 2×1012 cm−2eV−1. Based on comparison to the HfO2/In0.53Ga0.47As interface without Al2O3 interfacial passivation where the value Dit∼1013 cm−2eV−1 is encountered near the midgap, we can conclude that the presence of Al2O3 passivation noticeably improves the interface quality.