Support-reducing decomposition for FPGA mapping

Decomposition is a technology-independent process, in which a large complex function is broken into smaller, less complex functions. The costs of two-level or factored-form representations (cubes and literals) are used in most decomposition methods, as they have a high correlation with the area of cell-based designs. However, this correlation is weaker for field-programmable gate arrays (FPGAs) based on look-up tables. Furthermore, local optimizations have limited power due to the structural bias of the circuit descriptions. This paper tries to reduce the structural biasing by remapping the LUT network and decomposing the derived functions using the support as cost function. The proposed method improves the FPGA mapping results of a commercial tool for the 20 largest MCNC benchmarks, with gains of 28% in delay plus 18% in area when targeting delay, and a reduction of 28% in area plus 14% in delay with area as cost function. Results with 23% less area and 6% less delay are obtained after physical synthesis (post place-and-route). Moreover, 12 of the best known results for delay (and 3 for area) of the EPFL benchmarks are improved.Peer ReviewedPostprint (author's final draft

SMTBDD: New Form of BDD for Logic Synthesis

The main purpose of the paper is to suggest a new form of BDD – SMTBDD diagram, methods of obtaining, and its basic features. The idea of using SMTBDD diagram in the process of logic synthesis dedicated to FPGA structures is presented. The creation of SMTBDD diagrams is the result of cutting BDD diagram which is the effect of multiple decomposition. The essence of a proposed decomposition method rests on the way of determining the number of necessary ‘g’ bounded functions on the basis of the content of a root table connected with an appropriate SMTBDD diagram. The article presents the methods of searching non-disjoint decomposition using SMTBDD diagrams. Besides, it analyzes the techniques of choosing cutting levels as far as effective technology mapping is concerned. The paper also discusses the results of the experiments which confirm the efficiency of the analyzed decomposition methods

Energy-Efficient Digital Circuit Design using Threshold Logic Gates

abstract: Improving energy efficiency has always been the prime objective of the custom and automated digital circuit design techniques. As a result, a multitude of methods to reduce power without sacrificing performance have been proposed. However, as the field of design automation has matured over the last few decades, there have been no new automated design techniques, that can provide considerable improvements in circuit power, leakage and area. Although emerging nano-devices are expected to replace the existing MOSFET devices, they are far from being as mature as semiconductor devices and their full potential and promises are many years away from being practical. The research described in this dissertation consists of four main parts. First is a new circuit architecture of a differential threshold logic flipflop called PNAND. The PNAND gate is an edge-triggered multi-input sequential cell whose next state function is a threshold function of its inputs. Second a new approach, called hybridization, that replaces flipflops and parts of their logic cones with PNAND cells is described. The resulting \hybrid circuit, which consists of conventional logic cells and PNANDs, is shown to have significantly less power consumption, smaller area, less standby power and less power variation. Third, a new architecture of a field programmable array, called field programmable threshold logic array (FPTLA), in which the standard lookup table (LUT) is replaced by a PNAND is described. The FPTLA is shown to have as much as 50% lower energy-delay product compared to conventional FPGA using well known FPGA modeling tool called VPR. Fourth, a novel clock skewing technique that makes use of the completion detection feature of the differential mode flipflops is described. This clock skewing method improves the area and power of the ASIC circuits by increasing slack on timing paths. An additional advantage of this method is the elimination of hold time violation on given short paths. Several circuit design methodologies such as retiming and asynchronous circuit design can use the proposed threshold logic gate effectively. Therefore, the use of threshold logic flipflops in conventional design methodologies opens new avenues of research towards more energy-efficient circuits.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Automated Synthesis of Memristor Crossbar Networks

The advancement of semiconductor device technology over the past decades has enabled the design of increasingly complex electrical and computational machines. Electronic design automation (EDA) has played a significant role in the design and implementation of transistor-based machines. However, as transistors move closer toward their physical limits, the speed-up provided by Moore\u27s law will grind to a halt. Once again, we find ourselves on the verge of a paradigm shift in the computational sciences as newer devices pave the way for novel approaches to computing. One of such devices is the memristor -- a resistor with non-volatile memory. Memristors can be used as junctional switches in crossbar circuits, which comprise of intersecting sets of vertical and horizontal nanowires. The major contribution of this dissertation lies in automating the design of such crossbar circuits -- doing a new kind of EDA for a new kind of computational machinery. In general, this dissertation attempts to answer the following questions: a. How can we synthesize crossbars for computing large Boolean formulas, up to 128-bit? b. How can we synthesize more compact crossbars for small Boolean formulas, up to 8-bit? c. For a given loop-free C program doing integer arithmetic, is it possible to synthesize an equivalent crossbar circuit? We have presented novel solutions to each of the above problems. Our new, proposed solutions resolve a number of significant bottlenecks in existing research, via the usage of innovative logic representation and artificial intelligence techniques. For large Boolean formulas (up to 128-bit), we have utilized Reduced Ordered Binary Decision Diagrams (ROBDDs) to automatically synthesize linearly growing crossbar circuits that compute them. This cutting edge approach towards flow-based computing has yielded state-of-the-art results. It is worth noting that this approach is scalable to n-bit Boolean formulas. We have made significant original contributions by leveraging artificial intelligence for automatic synthesis of compact crossbar circuits. This inventive method has been expanded to encompass crossbar networks with 1D1M (1-diode-1-memristor) switches, as well. The resultant circuits satisfy the tight constraints of the Feynman Grand Prize challenge and are able to perform 8-bit binary addition. A leading edge development for end-to-end computation with flow-based crossbars has been implemented, which involves methodical translation of loop-free C programs into crossbar circuits via automated synthesis. The original contributions described in this dissertation reflect the substantial progress we have made in the area of electronic design automation for synthesis of memristor crossbar networks

Exploiting Satisfiability Solvers for Efficient Logic Synthesis

Logic synthesis is an important part of electronic design automation (EDA) flows, which enable the implementation of digital systems. As the design size and complexity increase, the data structures and algorithms for logic synthesis must adapt and improve in order to keep pace and to maintain acceptable runtime and high-quality results. Large circuits were often represented using binary decision diagrams (BDDs) that were rapidly adopted by logic synthesis tools beginning in the 1980s. Nowadays, BDD-based algorithms are still enhanced, but the possibilities for improvement are somewhat saturated after some 35 years of research. Alternatively, the first EDA applications that exploit Boolean satisfiability (SAT) were developed in the 1990s. Despite the worst-case exponential runtime of SAT solvers, rapid progress in their performance enabled the creation of efficient SAT-based algorithms. Yet, logic synthesis started using SAT solvers more diffusely only in the last decade. Therefore, thorough research is still required both for exploiting SAT solvers and for encoding logic synthesis problems into SAT. Our main goal in this thesis is to facilitate and promote the further integration of SAT solvers into EDA by proposing and evaluating novel SAT-based algorithms that can be used as building blocks in logic synthesis tools. First, we propose a rapid algorithm for LEXSAT, which generates satisfying assignments in lexicographic order. We show that LEXSAT can bring canonicity, which guarantees the generation of unique results, when using SAT solvers in EDA applications. Next, we present a new SAT-based algorithm that progressively generates irredundant sums of products (SOPs), which still play a crucial role in many logic synthesis tools. Using LEXSAT, for the first time, we can generate canonical SAT-based SOPs that, much like BDD-based SOPs, are unique for a given function and variable order but could relax canonicity in order to improve speed and scalability. Unlike BDDs, due to its progressive nature, our algorithm can generate partial SOPs for applications that can work with incomplete circuit functionality. It is noteworthy that both LEXSAT and the SAT-based SOPs are applicable beyond logic synthesis and EDA. Finally, we focus on resubstitution, which reimplements a given Boolean function as a new function that depends on a set of existing functions called divisors. We propose the carving interpolation algorithm that, unlike the traditional Craig interpolation, forces the use of a specific divisor as an input of the new function. This is particularly useful for global circuit restructuring and for some synthesis-based engineering change order (ECO) algorithms. Furthermore, we compare two existing SAT-based methodologies for resubstitution, which are used for post-mapping logic optimisation. The first methodology combines SAT-based functional dependency checking and Craig interpolation that are also used for our carving interpolation; the second methodology is based on cube enumeration and is similar to the SAT-based SOP generation. The initial implementations of our novel SAT-based algorithms offer either better performance or new features, or both, compared to their state-of-the-art versions. As the results indicate, a further thorough development of SAT-based algorithms for logic synthesis, like the one performed for BDDs in the past, can help overcome existing limitations and keep up with growing designs and design complexity

Synthesis for circuit reliability

textElectrical and Computer Engineerin

Advances in Functional Decomposition: Theory and Applications

Functional decomposition aims at finding efficient representations for Boolean functions. It is used in many applications, including multi-level logic synthesis, formal verification, and testing. This dissertation presents novel heuristic algorithms for functional decomposition. These algorithms take advantage of suitable representations of the Boolean functions in order to be efficient. The first two algorithms compute simple-disjoint and disjoint-support decompositions. They are based on representing the target function by a Reduced Ordered Binary Decision Diagram (BDD). Unlike other BDD-based algorithms, the presented ones can deal with larger target functions and produce more decompositions without requiring expensive manipulations of the representation, particularly BDD reordering. The third algorithm also finds disjoint-support decompositions, but it is based on a technique which integrates circuit graph analysis and BDD-based decomposition. The combination of the two approaches results in an algorithm which is more robust than a purely BDD-based one, and that improves both the quality of the results and the running time. The fourth algorithm uses circuit graph analysis to obtain non-disjoint decompositions. We show that the problem of computing non-disjoint decompositions can be reduced to the problem of computing multiple-vertex dominators. We also prove that multiple-vertex dominators can be found in polynomial time. This result is important because there is no known polynomial time algorithm for computing all non-disjoint decompositions of a Boolean function. The fifth algorithm provides an efficient means to decompose a function at the circuit graph level, by using information derived from a BDD representation. This is done without the expensive circuit re-synthesis normally associated with BDD-based decomposition approaches. Finally we present two publications that resulted from the many detours we have taken along the winding path of our research

Automatic design of domain-specific instructions for low-power processors

This paper explores hardware specialization of low­ power processors to improve performance and energy efficiency. Our main contribution is an automated framework that analyzes instruction sequences of applications within a domain at the loop body level and identifies exactly and partially-matching sequences across applications that can become custom instructions. Our framework transforms sequences to a new code abstraction, a Merging Diagram, that improves similarity identification, clusters alike groups of potential custom instructions to effectively reduce the search space, and selects merged custom instructions to efficiently exploit the available customizable area. For a set of 11 media applications, our fast framework generates instructions that significantly improve the energy-delay product and speed­ up, achieving more than double the savings as compared to a technique analyzing sequences within basic blocks. This paper shows that partially-matched custom instructions, which do not significantly increase design time, are crucial to achieving higher energy efficiency at limited hardware areas