Kompetensi pembimbing syarikat bertauliah Sistem Latihan Dual Nasional (SLDN)

Sistem Latihan Dual Nasional (SLDN) merupakan satu sistem latihan dan usahasama antara sektor awam dan sektor swasta dilaksanakan untuk melahirkan tenaga mahir k-worker selari dengan keperluan industri masa kini untuk membangunkan ekonomi negara. Pihak kerajaan dan syarikat swasta menaja pekerja pilihan mereka sebagai pelatih dalam sistem latihan ini bagi mempertingkatkan kebolehan pekerja mereka. Selain itu, pelatih juga terdiri daripada pelajar yang tidak dapat melanjutkan pelajaran ke mana-mana institusi pengajian tinggi awam mahupun swasta. Sistem ini menjalankan pendekatan day release iaitu pelatih menjalani latihan selama empat hari di industri dan satu hari di institusi latihan atau block release iaitu pelatih menjalani latihan kemahiran di industri empat bulan dan satu bulan di institusi latihan mengikut kesesuaian industri tersebut. Kajian berbentuk deskriptif dijalankan untuk melihat melihat tahap kompetensi pembimbing SLDN. Selain itu juga, kajian ini dijalankan bagi melihat perbezaan terhadap tahap pengetahuan, kemahiran dan sikap pembimbing SLDN berdasarkan jantina. Kajian ini juga dibuat bagi menentukan hubungan kompetensi pembimbing berdasarkan pengalaman bekerja. Penyelidikan tinjauan deskriptif ini menggunakan borang soal selidik sebagai instrumen kajian berskala Likert. Seramai 84 orang responden yang terdiri daripada pembimbing syarikat bertauliah SLDN terlibat di dalam kajian ini. Data dianalisis menggunakan SPSS versi 16.0. Hasil analisis mendapati pembimbing mempunyai pengetahuan yang tinggi di samping kemahiran dan sikap. Keputusan inferensi pula menunjukkan tidak terdapat perbezaan antara tahap pengetahuan, kemahiran dan sikap pembimbing berdasarkan jantina manakala analisis korelasi Pearson menunjukkan tidak terdapat hubungan antara kompetensi pembimbing berdasarkan pengalaman bekerja

The integrated use of enterprise and system dynamics modelling techniques in support of business decisions

Enterprise modelling techniques support business process re-engineering by capturing existing processes and based on perceived outputs, support the design of future process models capable of meeting enterprise requirements. System dynamics modelling tools on the other hand are used extensively for policy analysis and modelling aspects of dynamics which impact on businesses. In this paper, the use of enterprise and system dynamics modelling techniques has been integrated to facilitate qualitative and quantitative reasoning about the structures and behaviours of processes and resource systems used by a Manufacturing Enterprise during the production of composite bearings. The case study testing reported has led to the specification of a new modelling methodology for analysing and managing dynamics and complexities in production systems. This methodology is based on a systematic transformation process, which synergises the use of a selection of public domain enterprise modelling, causal loop and continuous simulationmodelling techniques. The success of the modelling process defined relies on the creation of useful CIMOSA process models which are then converted to causal loops. The causal loop models are then structured and translated to equivalent dynamic simulation models using the proprietary continuous simulation modelling tool iThink

Kompetensi pembimbing syarikat bertauliah Sistem Latihan Dual Nasional (SLDN)

Sistem Latihan Dual Nasional (SLDN) merupakan satu sistem latihan dan usahasama antara sektor awam dan sektor swasta dilaksanakan untuk melahirkan tenaga mahir k-worker selari dengan keperluan industri masa kini untuk membangunkan ekonomi negara. Pihak kerajaan dan syarikat swasta menaja pekerja pilihan mereka sebagai pelatih dalam sistem latihan ini bagi mempertingkatkan kebolehan pekerja mereka. Selain itu, pelatih juga terdiri daripada pelajar yang tidak dapat melanjutkan pelajaran ke mana-mana institusi pengajian tinggi awam mahupun swasta. Sistem ini menjalankan pendekatan day release iaitu pelatih menjalani latihan selama empat hari di industri dan satu hari di institusi latihan atau block release iaitu pelatih menjalani latihan kemahiran di industri empat bulan dan satu bulan di institusi latihan mengikut kesesuaian industri tersebut. Kajian berbentuk deskriptif dijalankan untuk melihat melihat tahap kompetensi pembimbing SLDN. Selain itu juga, kajian ini dijalankan bagi melihat perbezaan terhadap tahap pengetahuan, kemahiran dan sikap pembimbing SLDN berdasarkan jantina. Kajian ini juga dibuat bagi menentukan hubungan kompetensi pembimbing berdasarkan pengalaman bekerja. Penyelidikan tinjauan deskriptif ini menggunakan borang soal selidik sebagai instrumen kajian berskala Likert. Seramai 84 orang responden yang terdiri daripada pembimbing syarikat bertauliah SLDN terlibat di dalam kajian ini. Data dianalisis menggunakan SPSS versi 16.0. Hasil analisis mendapati pembimbing mempunyai pengetahuan yang tinggi di samping kemahiran dan sikap. Keputusan inferensi pula menunjukkan tidak terdapat perbezaan antara tahap pengetahuan, kemahiran dan sikap pembimbing berdasarkan jantina manakala analisis korelasi Pearson menunjukkan tidak terdapat hubungan antara kompetensi pembimbing berdasarkan pengalaman bekerja

Process intensification for post combustion CO₂ capture with chemical absorption: a critical review

The concentration of CO₂ in the atmosphere is increasing rapidly. CO₂ emissions may have an impact on global climate change. Effective CO₂ emission abatement strategies such as carbon capture and storage (CCS) are required to combat this trend. Compared with pre-combustion carbon capture and oxy-fuel carbon capture approaches, post-combustion CO₂ capture (PCC) using solvent process is one of the most mature carbon capture technologies. There are two main barriers for the PCC process using solvent to be commercially deployed: (a) high capital cost; (b) high thermal efficiency penalty due to solvent regeneration. Applying process intensification (PI) technology into PCC with solvent process has the potential to significantly reduce capital costs compared with conventional technology using packed columns. This paper intends to evaluate different PI technologies for their suitability in PCC process. The study shows that rotating packed bed (RPB) absorber/stripper has attracted much interest due to its high mass transfer capability. Currently experimental studies on CO₂ capture using RPB are based on standalone absorber or stripper. Therefore a schematic process flow diagram of intensified PCC process is proposed so as to motivate other researches for possible optimal design, operation and control. To intensify heat transfer in reboiler, spinning disc technology is recommended. To replace cross heat exchanger in conventional PCC (with packed column) process, printed circuit heat exchanger will be preferred. Solvent selection for conventional PCC process has been studied extensively. However, it needs more studies for solvent selection in intensified PCC process. The authors also predicted research challenges in intensified PCC process and potential new breakthrough from different aspects

Review on the prediction of residual stress in welded steel components

Residual stress after welding has negative effects on the service life of welded steel components or structures. This work reviews three most commonly used methods for predicting residual stress, namely, empirical, semi-empirical and process simulation methods. Basic principles adopted by these methods are introduced. The features and limitations of each method are discussed as well. The empirical method is the most practical but its accuracy relies heavily on experiments. Mechanical theories are employed in the semi-empirical method, while other aspects, such as temperature variation and phase transformation, are simply ignored. The process simulation method has been widely used due to its capability of handling with large and complex components. To improve its accuracy and efficiency, several improvements need to be done for each simulation aspect of this method

The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications

The XDEM multi-physics and multi-scale simulation platform roots in the Ex- tended Discrete Element Method (XDEM) and is being developed at the In- stitute of Computational Engineering at the University of Luxembourg. The platform is an advanced multi- physics simulation technology that combines flexibility and versatility to establish the next generation of multi-physics and multi-scale simulation tools. For this purpose the simulation framework relies on coupling various predictive tools based on both an Eulerian and Lagrangian approach. Eulerian approaches represent the wide field of continuum models while the Lagrange approach is perfectly suited to characterise discrete phases. Thus, continuum models include classical simulation tools such as Computa- tional Fluid Dynamics (CFD) or Finite Element Analysis (FEA) while an ex- tended configuration of the classical Discrete Element Method (DEM) addresses the discrete e.g. particulate phase. Apart from predicting the trajectories of individual particles, XDEM extends the application to estimating the thermo- dynamic state of each particle by advanced and optimised algorithms. The thermodynamic state may include temperature and species distributions due to chemical reaction and external heat sources. Hence, coupling these extended features with either CFD or FEA opens up a wide range of applications as diverse as pharmaceutical industry e.g. drug production, agriculture food and processing industry, mining, construction and agricultural machinery, metals manufacturing, energy production and systems biology

Uncertainty in the manufacturing of fibrous thermosetting composites: A review

Composites manufacturing involves many sources of uncertainty associated with material properties variation and boundary conditions variability. In this study, experimental and numerical results concerning the statistical characterization and the influence of inputs variability on the main steps of composites manufacturing including process-induced defects are presented and analysed. Each of the steps of composite manufacturing introduces variability to the subsequent processes, creating strong interdependencies between the process parameters and properties of the final part. The development and implementation of stochastic simulation tools is imperative to quantify process output variabilities and develop optimal process designs in composites manufacturing