On the use of simulated experiments in designing tests for material characterization from full-field measurements

The present paper deals with the use of simulated experiments to improve the design of an actual mechanical test. The analysis focused on the identification of the orthotropic properties of composites using the unnotched Iosipescu test and a full-field optical technique, the grid method. The experimental test was reproduced numerically by finite element analysis and the recording of deformed grey level images by a CCD camera was simulated trying to take into account the most significant parameters that can play a role during an actual test, e.g. the noise, the failure of the specimen, the size of the grid printed on the surface, etc. The grid method then was applied to the generated synthetic images in order to extract the displacement and strain fields and the Virtual Fields Method was finally used to identify the material properties and a cost function was devised to evaluate the error in the identification. The developed procedure was used to study different features of the test such as the aspect ratio and the fibre orientation of the specimen, the use of smoothing functions in the strain reconstruction from noisy data, the influence of missing data on the identification. Four different composite materials were considered and, for each of them, a set of optimized design variables was found by minimization of the cost function

Testing For Nonlinearity Using Redundancies: Quantitative and Qualitative Aspects

A method for testing nonlinearity in time series is described based on information-theoretic functionals -- redundancies, linear and nonlinear forms of which allow either qualitative, or, after incorporating the surrogate data technique, quantitative evaluation of dynamical properties of scrutinized data. An interplay of quantitative and qualitative testing on both the linear and nonlinear levels is analyzed and robustness of this combined approach against spurious nonlinearity detection is demonstrated. Evaluation of redundancies and redundancy-based statistics as functions of time lag and embedding dimension can further enhance insight into dynamics of a system under study.Comment: 32 pages + 1 table in separate postscript files, 12 figures in 12 encapsulated postscript files, all in uuencoded, compressed tar file. Also available by anon. ftp to santafe.edu, in directory pub/Users/mp/qq. To be published in Physica D., [email protected]

Perspectives of Nuclear Physics in Europe: NuPECC Long Range Plan 2010

The goal of this European Science Foundation Forward Look into the future of Nuclear Physics is to bring together the entire Nuclear Physics community in Europe to formulate a coherent plan of the best way to develop the field in the coming decade and beyond.<p></p> The primary aim of Nuclear Physics is to understand the origin, evolution, structure and phases of strongly interacting matter, which constitutes nearly 100% of the visible matter in the universe. This is an immensely important and challenging task that requires the concerted effort of scientists working in both theory and experiment, funding agencies, politicians and the public.<p></p> Nuclear Physics projects are often “big science”, which implies large investments and long lead times. They need careful forward planning and strong support from policy makers. This Forward Look provides an excellent tool to achieve this. It represents the outcome of detailed scrutiny by Europe’s leading experts and will help focus the views of the scientific community on the most promising directions in the field and create the basis for funding agencies to provide adequate support.<p></p> The current NuPECC Long Range Plan 2010 “Perspectives of Nuclear Physics in Europe” resulted from consultation with close to 6 000 scientists and engineers over a period of approximately one year. Its detailed recommendations are presented on the following pages. For the interested public, a short summary brochure has been produced to accompany the Forward Look.<p></p&gt

Lamb wave near field enhancements for surface breaking defects in plates

Near field surface wave ultrasonic enhancements have previously been used to detect surface breaking defects in thick samples using Rayleigh waves. Here, we present analogous surface wave enhancements for Lamb waves propagating in plates. By tracking frequency intensities in selected regions of time-frequency representations, we observe frequency enhancement in the near field, due to constructive interference of the incident wave mode with those reflected and mode converted at the defect. This is explained using two test models; a square based notch and an opening crack, which are used to predict the contribution to the out-of-plane displacement from the reflected and mode converted waves. This method has the potential to provide a reliable method for the near field identification and characterisation of surface breaking defects in plates

Picosecond-jet spectroscopy and photochemistry. Energy redistribution and its impact on coherence, isomerization, dissociation and solvation

The development of the picosecond-jet technique is presented. The applications of the technique to the studies of coherence (quantum beats), photodissociation, isomerization and partial solvation of molecules in supersonic-jet beams are detailed with emphasis on the role of intramolecular energy redistribution. Experimental evidence for intramolecular threshold effect for rates as a function of excess molecular energy is given and explained using simple theory for the redistribution of energy among certain modes. Comparison with R.R.K.M. calculation is also made to assess the nature of the statistical behaviour of the energy redistribution

Low-diffusion Xe-He gas mixtures for rare-event detection: electroluminescence yield

High pressure xenon Time Projection Chambers (TPC) based on secondary scintillation (electroluminescence) signal amplification are being proposed for rare event detection such as directional dark matter, double electron capture and double beta decay detection. The discrimination of the rare event through the topological signature of primary ionisation trails is a major asset for this type of TPC when compared to single liquid or double-phase TPCs, limited mainly by the high electron diffusion in pure xenon. Helium admixtures with xenon can be an attractive solution to reduce the electron diffu- sion significantly, improving the discrimination efficiency of these optical TPCs. We have measured the electroluminescence (EL) yield of Xe–He mixtures, in the range of 0 to 30% He and demonstrated the small impact on the EL yield of the addition of helium to pure xenon. For a typical reduced electric field of 2.5 kV/cm/bar in the EL region, the EL yield is lowered by ∼ 2%, 3%, 6% and 10% for 10%, 15%, 20% and 30% of helium concentration, respectively. This decrease is less than what has been obtained from the most recent simulation framework in the literature. The impact of the addition of helium on EL statistical fluctuations is negligible, within the experimental uncertainties. The present results are an important benchmark for the simulation tools to be applied to future optical TPCs based on Xe-He mixtures. [Figure not available: see fulltext.]

OH-Radical Oxidation of Lung Surfactant Protein B on Aqueous Surfaces

Air pollutants generate reactive oxygen species on lung surfaces. Here we report how hydroxyl radicals (·OH) injected on the surface of water react with SP-B_(1–25), a 25-residue polypeptide surrogate of human lung surfactant protein B. Our experiments consist of intersecting microjets of aqueous SP-B_(1–25) solutions with O_3/O_2/H_2O/N_2(g) gas streams that are photolyzed into ·OH(g) in situ by 266 nm laser nanosecond pulses. Surface-sensitive mass spectrometry enables us to monitor the prompt (<10 μs) and simultaneous formation of primary O_n-containing products/intermediates (n ≤ 5) triggered by the reaction of ·OH with interfacial SP-B_(1–25). We found that O-atoms from both O_3 and ·OH are incorporated into the reactive cysteine Cys_8 and Cys_(11) and tryptophan Trp_9 components of the hydrophobic N-terminus of SP-B_(1–25) that lies at the topmost layers of the air–liquid interface. Remarkably, these processes are initiated by ·OH additions rather than by H-atom abstractions from S–H, C–H, or N–H groups. By increasing the hydrophilicity of the N-terminus region of SP-B_(1–25), these transformations will impair its role as a surfactant

Laser Ultrasound Inspection Based on Wavelet Transform and Data Clustering for Defect Estimation in Metallic Samples

Laser-generated ultrasound is a modern non-destructive testing technique. It has been investigated over recent years as an alternative to classical ultrasonic methods, mainly in industrial maintenance and quality control procedures. In this study, the detection and reconstruction of internal defects in a metallic sample is performed by means of a time-frequency analysis of ultrasonic waves generated by a laser-induced thermal mechanism. In the proposed methodology, we used wavelet transform due to its multi-resolution time frequency characteristics. In order to isolate and estimate the corresponding time of flight of eventual ultrasonic echoes related to internal defects, a density-based spatial clustering was applied to the resulting time frequency maps. Using the laser scan beam’s position, the ultrasonic transducer’s location and the echoes’ arrival times were determined, the estimation of the defect’s position was carried out afterwards. Finally, clustering algorithms were applied to the resulting geometric solutions from the set of the laser scan points which was proposed to obtain a two-dimensional projection of the defect outline over the scan plane. The study demonstrates that the proposed method of wavelet transform ultrasonic imaging can be effectively applied to detect and size internal defects without any reference information, which represents a valuable outcome for various applications in the industry. View Full-TextPeer ReviewedPostprint (published version