1,236 research outputs found
Depth Fields: Extending Light Field Techniques to Time-of-Flight Imaging
A variety of techniques such as light field, structured illumination, and
time-of-flight (TOF) are commonly used for depth acquisition in consumer
imaging, robotics and many other applications. Unfortunately, each technique
suffers from its individual limitations preventing robust depth sensing. In
this paper, we explore the strengths and weaknesses of combining light field
and time-of-flight imaging, particularly the feasibility of an on-chip
implementation as a single hybrid depth sensor. We refer to this combination as
depth field imaging. Depth fields combine light field advantages such as
synthetic aperture refocusing with TOF imaging advantages such as high depth
resolution and coded signal processing to resolve multipath interference. We
show applications including synthesizing virtual apertures for TOF imaging,
improved depth mapping through partial and scattering occluders, and single
frequency TOF phase unwrapping. Utilizing space, angle, and temporal coding,
depth fields can improve depth sensing in the wild and generate new insights
into the dimensions of light's plenoptic function.Comment: 9 pages, 8 figures, Accepted to 3DV 201
Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery
One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions
A Brief Survey of Image-Based Depth Upsampling
Recently, there has been remarkable growth of interest in the development and applications of Time-of-Flight (ToF) depth cameras. However, despite the permanent improvement of their characteristics, the practical applicability of ToF cameras is still limited by low resolution and quality of depth measurements. This has motivated many researchers to combine ToF cameras with other sensors in order to enhance and upsample depth images. In this paper, we compare ToF cameras to three image-based techniques for depth recovery, discuss the upsampling problem and survey the approaches that couple ToF depth images with high-resolution optical images. Other classes of upsampling methods are also mentioned
Image-guided ToF depth upsampling: a survey
Recently, there has been remarkable growth of interest in the development and applications of time-of-flight (ToF) depth cameras. Despite the permanent improvement of their characteristics, the practical applicability of ToF cameras is still limited by low resolution and quality of depth measurements. This has motivated many researchers to combine ToF cameras with other sensors in order to enhance and upsample depth images. In this paper, we review the approaches that couple ToF depth images with high-resolution optical images. Other classes of upsampling methods are also briefly discussed. Finally, we provide an overview of performance evaluation tests presented in the related studies
Human Respiration Rate Measurement with High-Speed Digital Fringe Projection Technique
This paper proposes a non-contact continuous respiration monitoring method based on Fringe Projection Profilometry (FPP). This method aims to overcome the limitations of traditional intrusive techniques by providing continuous monitoring without interfering with normal breathing. The FPP sensor captures three-dimensional (3D) respiratory motion from the chest wall and abdomen, and the analysis algorithms extract respiratory parameters. The system achieved a high Signal-to-Noise Ratio (SNR) of 37 dB with an ideal sinusoidal respiration signal. Experimental results demonstrated that a mean correlation of 0.95 and a mean Root-Mean-Square Error (RMSE) of 0.11 breaths per minute (bpm) were achieved when comparing to a reference signal obtained from a spirometer
SPLODE: Semi-Probabilistic Point and Line Odometry with Depth Estimation from RGB-D Camera Motion
Active depth cameras suffer from several limitations, which cause incomplete
and noisy depth maps, and may consequently affect the performance of RGB-D
Odometry. To address this issue, this paper presents a visual odometry method
based on point and line features that leverages both measurements from a depth
sensor and depth estimates from camera motion. Depth estimates are generated
continuously by a probabilistic depth estimation framework for both types of
features to compensate for the lack of depth measurements and inaccurate
feature depth associations. The framework models explicitly the uncertainty of
triangulating depth from both point and line observations to validate and
obtain precise estimates. Furthermore, depth measurements are exploited by
propagating them through a depth map registration module and using a
frame-to-frame motion estimation method that considers 3D-to-2D and 2D-to-3D
reprojection errors, independently. Results on RGB-D sequences captured on
large indoor and outdoor scenes, where depth sensor limitations are critical,
show that the combination of depth measurements and estimates through our
approach is able to overcome the absence and inaccuracy of depth measurements.Comment: IROS 201
- …