On multimodality of obnoxious faclity location models

Obnoxious single facility location models are models that have the aim to find the best location for an undesired facility. Undesired is usually expressed in relation to the so-called demand points that represent locations hindered by the facility. Because obnoxious facility location models as a rule are multimodal, the standard techniques of convex analysis used for locating desirable facilities in the plane may be trapped in local optima instead of the desired global optimum. It is assumed that having more optima coincides with being harder to solve. In this thesis the multimodality of obnoxious single facility location models is investigated in order to know which models are challenging problems in facility location problems and which are suitable for site selection. Selected for this are the obnoxious facility models that appear to be most important in literature. These are the maximin model, that maximizes the minimum distance from demand point to the obnoxious facility, the maxisum model, that maximizes the sum of distance from the demand points to the facility and the minisum model, that minimizes the sum of damage of the facility to the demand points. All models are measured with the Euclidean distances and some models also with the rectilinear distance metric. Furthermore a suitable algorithm is selected for testing multimodality. Of the tested algorithms in this thesis, Multistart is most appropriate. A small numerical experiment shows that Maximin models have on average the most optima, of which the model locating an obnoxious linesegment has the most. Maximin models have few optima and are thus not very hard to solve. From the Minisum models, the models that have the most optima are models that take wind into account. In general can be said that the generic models have less optima than the weighted versions. Models that are measured with the rectilinear norm do have more solutions than the same models measured with the Euclidean norm. This can be explained for the maximin models in the numerical example because the shape of the norm coincides with a bound of the feasible area, so not all solutions are different optima. The difference found in number of optima of the Maxisum and Minisum can not be explained by this phenomenon

Optimal path of a moving service vehicle on network with probabilistic demands

In this paper, I examine twofold problem. The first one is concerned with finding the optimal location of a single facility in a network with demands randomly distributed over the edges. The second problem is about determining the optimal path between two specified nodes of the network of a moving vehicle that continuously interacts with randomly distributed requests for service over the edges. The problems are investigated using different performance measures and probability distributions of the demands

Problemas de localização-distribuição de serviços semiobnóxios: aproximações e apoio à decisão

Doutoramento em Gestão IndustrialA presente tese resulta de um trabalho de investigação cujo objectivo se centrou no problema de localização-distribuição (PLD) que pretende abordar, de forma integrada, duas actividades logísticas intimamente relacionadas: a localização de equipamentos e a distribuição de produtos. O PLD, nomeadamente a sua modelação matemática, tem sido estudado na literatura, dando origem a diversas aproximações que resultam de diferentes cenários reais. Importa portanto agrupar as diferentes variantes por forma a facilitar e potenciar a sua investigação. Após fazer uma revisão e propor uma taxonomia dos modelos de localização-distribuição, este trabalho foca-se na resolução de alguns modelos considerados como mais representativos. É feita assim a análise de dois dos PLDs mais básicos (os problema capacitados com procura nos nós e nos arcos), sendo apresentadas, para ambos, propostas de resolução. Posteriormente, é abordada a localização-distribuição de serviços semiobnóxios. Este tipo de serviços, ainda que seja necessário e indispensável para o público em geral, dada a sua natureza, exerce um efeito desagradável sobre as comunidades contíguas. Assim, aos critérios tipicamente utilizados na tomada de decisão sobre a localização destes serviços (habitualmente a minimização de custo) é necessário adicionar preocupações que reflectem a manutenção da qualidade de vida das regiões que sofrem o impacto do resultado da referida decisão. A abordagem da localização-distribuição de serviços semiobnóxios requer portanto uma análise multi-objectivo. Esta análise pode ser feita com recurso a dois métodos distintos: não interactivos e interactivos. Ambos são abordados nesta tese, com novas propostas, sendo o método interactivo proposto aplicável a outros problemas de programação inteira mista multi-objectivo. Por último, é desenvolvida uma ferramenta de apoio à decisão para os problemas abordados nesta tese, sendo apresentada a metodologia adoptada e as suas principais funcionalidades. A ferramenta desenvolvida tem grandes preocupações com a interface de utilizador, visto ser direccionada para decisores que tipicamente não têm conhecimentos sobre os modelos matemáticos subjacentes a este tipo de problemas.This thesis main objective is to address the location-routing problem (LRP) which intends to tackle, using an integrated approach, two highly related logistics activities: the location of facilities and the distribution of materials. The LRP, namely its mathematical formulation, has been studied in the literature, and several approaches have emerged, corresponding to different real-world scenarios. Therefore, it is important to identify and group the different LRP variants, in order to segment current research and foster future studies. After presenting a review and a taxonomy of location-routing models, the following research focuses on solving some of its variants. Thus, a study of two of the most basic LRPs (capacitated problems with demand either on the nodes or on the arcs) is performed, and new approaches are presented. Afterwards, the location-routing of semi-obnoxious facilities is addressed. These are facilities that, although providing useful and indispensible services, given their nature, bring about an undesirable effect to adjacent communities. Consequently, to the usual objectives when considering their location (cost minimization), new ones must be added that are able to reflect concerns regarding the quality of life of the communities impacted by the outcome of these decisions. The location-routing of semi-obnoxious facilities therefore requires to be analysed using multi-objective approaches, which can be of two types: noninteractive or interactive. Both are discussed and new methods proposed in this thesis; the proposed interactive method is suitable to other multi-objective mixed integer programming problems. Finally, a newly developed decision-support tool to address the LRP is presented (being the adopted methodology discussed, and its main functionalities shown). This tool has great concerns regarding the user interface, as it is directed at decision makers who typically don’t have specific knowledge of the underlying models of this type of problems

Application of a Modified ACO Algorithm for Optimizing Routes and Externality Effect of Solid Waste Management

To improve solid waste management and maintain its sustainability, it is important to reduce both the solid waste operational cost which includes the monetary value of distances covered and the externality effects of solid waste management. Therefore, this paper presents an application of a modified Ant Colony System algorithm to a bi-objective model for solid waste management in the Shama District in the Western Region of Ghana. The objective is to optimize route lengths and externality effects of solid waste management. Data on route lengths and population of communities along the routes were collected from 20 communities in the Shama Distric. Externality effect was measured by considering the population of the communities along the routes, the cost of treating a common cold subject to the assumption of two percent of the population being affected by the externality effect. The implemented algorithm has demonstrated the bi-objective optimal solution of route length (km) and externality effect (GHS) of (11, 2100) achievable on the path , which respectively represents a path linking the following communities: Aboadze, Abuesi Assorko Essaman, Beposo, Bosomdo and Fawomanye. There is therefore the need to ensure that the communities involved are linked with good roads

OPTIMIZATION OF RAILWAY TRANSPORTATION HAZMATS AND REGULAR COMMODITIES

Transportation of dangerous goods has been receiving more attention in the realm of academic and scientific research during the last few decades as countries have been increasingly becoming industrialized throughout the world, thereby making Hazmats an integral part of our life style. However, the number of scholarly articles in this field is not as many as those of other areas in SCM. Considering the low-probability-and-high-consequence (LPHC) essence of transportation of Hazmats, on the one hand, and immense volume of shipments accounting for more than hundred tons in North America and Europe, on the other, we can safely state that the number of scholarly articles and dissertations have not been proportional to the significance of the subject of interest. On this ground, we conducted our research to contribute towards further developing the domain of Hazmats transportation, and sustainable supply chain management (SSCM), in general terms. Transportation of Hazmats, from logistical standpoint, may include all modes of transport via air, marine, road and rail, as well as intermodal transportation systems. Although road shipment is predominant in most of the literature, railway transportation of Hazmats has proven to be a potentially significant means of transporting dangerous goods with respect to both economies of scale and risk of transportation; these factors, have not just given rise to more thoroughly investigation of intermodal transportation of Hazmats using road and rail networks, but has encouraged the competition between rail and road companies which may indeed have some inherent advantages compared to the other medium due to their infrastructural and technological backgrounds. Truck shipment has ostensibly proven to be providing more flexibility; trains, per contra, provide more reliability in terms of transport risk for conveying Hazmats in bulks. In this thesis, in consonance with the aforementioned motivation, we provide an introduction into the hazardous commodities shipment through rail network in the first chapter of the thesis. Providing relevant statistics on the volume of Hazmat goods, number of accidents, rate of incidents, and rate of fatalities and injuries due to the incidents involving Hazmats, will shed light onto the significance of the topic under study. As well, we review the most pertinent articles while putting more emphasis on the state-of-the-art papers, in chapter two. Following the discussion in chapter 3 and looking at the problem from carrier company’s perspective, a mixed integer quadratically constraint problem (MIQCP) is developed which seeks for the minimization of transportation cost under a set of constraints including those associating with Hazmats. Due to the complexity of the problem, the risk function has been piecewise linearized using a set of auxiliary variables, thereby resulting in an MIP problem. Further, considering the interests of both carrier companies and regulatory agencies, which are minimization of cost and risk, respectively, a multiobjective MINLP model is developed, which has been reduced to an MILP through piecewise linearization of the risk term in the objective function. For both single-objective and multiobjective formulations, model variants with bifurcated and nonbifurcated flows have been presented. Then, in chapter 4, we carry out experiments considering two main cases where the first case presents smaller instances of the problem and the second case focuses on a larger instance of the problem. Eventually, in chapter five, we conclude the dissertation with a summary of the overall discussion as well as presenting some comments on avenues of future work

Consensus Strategies for Signed Profiles on Graphs

The median problem is a classical problem in Location Theory: one searches for a location that minimizes the average distance to the sites of the clients. This is for desired facilities as a distribution center for a set of warehouses. More recently, for obnoxious facilities, the antimedian was studied. Here one maximizes the average distance to the clients. In this paper the mixed case is studied. Clients are represented by a profile, which is a sequence of vertices with repetitions allowed. In a signed profile each element is provided with a sign from {+,-}. Thus one can take into account whether the client prefers the facility (with a + sign) or rejects it (with a - sign). The graphs for which all median sets, or all antimedian sets, are connected are characterized. Various consensus strategies for signed profiles are studied, amongst which Majority, Plurality and Scarcity. Hypercubes are the only graphs on which Majority produces the median set for all signed profiles. Finally, the antimedian sets are found by the Scarcity Strategy on e.g. Hamming graphs, Johnson graphs and halfcubes.median;consensus function;median graph;majority rule;plurality strategy;Graph theory;Hamming graph;Johnson graph;halfcube;scarcity strategy;Discrete location and assignment;Distance in graphs

A solution method for a two-layer sustainable supply chain distribution model

This article presents an effective solution method for a two-layer, NP-hard sustainable supply chain distribution model. A DoE-guided MOGA-II optimiser based solution method is proposed for locating a set of non-dominated solutions distributed along the Pareto frontier. The solution method allows decision-makers to prioritise the realistic solutions, while focusing on alternate transportation scenarios. The solution method has been implemented for the case of an Irish dairy processing industry׳s two-layer supply chain network. The DoE generates 6100 real feasible solutions after 100 generations of the MOGA-II optimiser which are then refined using statistical experimentation. As the decision-maker is presented with a choice of several distribution routes on the demand side of the two-layer network, TOPSIS is applied to rank the set of non-dominated solutions thus facilitating the selection of the best sustainable distribution route. The solution method characterises the Pareto solutions from disparate scenarios through numerical and statistical experimentations. A set of realistic routes from plants to consumers is derived and mapped which minimises total CO2 emissions and costs where it can be seen that the solution method outperforms existing solution methods

On the approximation of the Minimum Disturbance p-Facility Location Problem

AbstractAn n×m non-negative integer matrix D={dij} is given, representing the disturbance that customer i receives by a facility at location j. We consider the problem of finding p facilities so that the maximum, over the n customers, of the sums of their disturbances is minimized. We show that this problem can be deterministically approximated within O(ρ(logn+logp)), where ρ is the ratio between the biggest and the smallest positive entry of D. We obtain this result by first taking a randomized rounding approach to the problem and then by derandomizing the algorithm by the method of conditional probabilities

On green routing and scheduling problem

The vehicle routing and scheduling problem has been studied with much interest within the last four decades. In this paper, some of the existing literature dealing with routing and scheduling problems with environmental issues is reviewed, and a description is provided of the problems that have been investigated and how they are treated using combinatorial optimization tools