Development of an algorithm for assessing canopy volumes with terrestrial LiDAR to implement precision spraying in vineyards

Received: February 13th, 2021 ; Accepted: November 28th, 2021 ; Published: December 3rd, 2021 ; Correspondence: [email protected] spraying is one of the techniques for the reduction of pesticides use and it can help achieve the new European Green Deal standards. The aim of such technique is to apply the right amount of pesticides according to the target characteristics. The precision spraying implementation requires target volume assessment, which can be carried out by LiDAR sensors. Such technique requires complex and time-consuming procedures of canopy characteristics computing through post-processing points cloud reconstruction. The present work aimed to develop and test an algorithm through the use of a tractor-coupled with terrestrial LiDAR and GNSS technology in order to simplify the process. With the aim to evaluate the algorithm the LiDAR-based volume was correlated with two manual measurements of canopy volume (Tree Row Volume and Point Net Cloud). The results showed good correlations between manual and LiDAR measures both for total canopy volumes (R 2 = 0.67 and 0.56) and for partial canopy volume (R 2 = 0.74). In conclusion, although the LiDAR-based algorithm works in automatic mode, the canopy volumes approximation seems acceptable to estimate the canopy volumes, with the advantages of a swifter procedure and less laborious post-processing computations

A Review of Current and Historical Research Contributions to the Development of Ground Autonomous Vehicles for Agriculture

In this study, a comprehensive overview of the available autonomous ground platforms developed by universities and research groups that were specifically designed to handle agricultural tasks was performed. As cost reduction and safety improvements are two of the most critical aspects for farmers, the development of autonomous vehicles can be of major interest, especially for those applications that are lacking in terms of mechanization improvements. This review aimed to provide a literature evaluation of present and historical research contributions toward designing and prototyping agricultural ground unmanned vehicles. The review was motivated by the intent to disseminate to the scientific community the main features of the autonomous tractor named BOPS-1960, which was conceived in the 1960s at the Alma Mater Studiorum University of Bologna (UNIBO). Jointly, the main characteristics of the modern DEDALO unmanned ground vehicle (UGV) for orchard and vineyard operations that was designed recently were evaluated. The basic principles, technology and sensors used in the two UNIBO prototypes are described in detail, together with an analysis of UGVs for agriculture conceived in recent years by research centers all around the world

The impact of agricultural activities on water quality: a case for collaborative catchment-scale management using integrated wireless sensor networks

The challenge of improving water quality is a growing global concern, typified by the European Commission Water Framework Directive and the United States Clean Water Act. The main drivers of poor water quality are economics, poor water management, agricultural practices and urban development. This paper reviews the extensive role of non-point sources, in particular the outdated agricultural practices, with respect to nutrient and contaminant contributions. Water quality monitoring (WQM) is currently undertaken through a number of data acquisition methods from grab sampling to satellite based remote sensing of water bodies. Based on the surveyed sampling methods and their numerous limitations, it is proposed that wireless sensor networks (WSNs), despite their own limitations, are still very attractive and effective for real-time spatio-temporal data collection for WQM applications. WSNs have been employed for WQM of surface and ground water and catchments, and have been fundamental in advancing the knowledge of contaminants trends through their high resolution observations. However, these applications have yet to explore the implementation and impact of this technology for management and control decisions, to minimize and prevent individual stakeholder’s contributions, in an autonomous and dynamic manner. Here, the potential of WSN-controlled agricultural activities and different environmental compartments for integrated water quality management is presented and limitations of WSN in agriculture and WQM are identified. Finally, a case for collaborative networks at catchment scale is proposed for enabling cooperation among individually networked activities/stakeholders (farming activities, water bodies) for integrated water quality monitoring, control and management

A robotic platform for precision agriculture and applications

Agricultural techniques have been improved over the centuries to match with the growing demand of an increase in global population. Farming applications are facing new challenges to satisfy global needs and the recent technology advancements in terms of robotic platforms can be exploited. As the orchard management is one of the most challenging applications because of its tree structure and the required interaction with the environment, it was targeted also by the University of Bologna research group to provide a customized solution addressing new concept for agricultural vehicles. The result of this research has blossomed into a new lightweight tracked vehicle capable of performing autonomous navigation both in the open-filed scenario and while travelling inside orchards for what has been called in-row navigation. The mechanical design concept, together with customized software implementation has been detailed to highlight the strengths of the platform and some further improvements envisioned to improve the overall performances. Static stability testing has proved that the vehicle can withstand steep slopes scenarios. Some improvements have also been investigated to refine the estimation of the slippage that occurs during turning maneuvers and that is typical of skid-steering tracked vehicles. The software architecture has been implemented using the Robot Operating System (ROS) framework, so to exploit community available packages related to common and basic functions, such as sensor interfaces, while allowing dedicated custom implementation of the navigation algorithm developed. Real-world testing inside the university’s experimental orchards have proven the robustness and stability of the solution with more than 800 hours of fieldwork. The vehicle has also enabled a wide range of autonomous tasks such as spraying, mowing, and on-the-field data collection capabilities. The latter can be exploited to automatically estimate relevant orchard properties such as fruit counting and sizing, canopy properties estimation, and autonomous fruit harvesting with post-harvesting estimations.Le tecniche agricole sono state migliorate nel corso dei secoli per soddisfare la crescente domanda di aumento della popolazione mondiale. I recenti progressi tecnologici in termini di piattaforme robotiche possono essere sfruttati in questo contesto. Poiché la gestione del frutteto è una delle applicazioni più impegnative, a causa della sua struttura arborea e della necessaria interazione con l'ambiente, è stata oggetto di ricerca per fornire una soluzione personalizzata che sviluppi un nuovo concetto di veicolo agricolo. Il risultato si è concretizzato in un veicolo cingolato leggero, capace di effettuare una navigazione autonoma sia nello scenario di pieno campo che all'interno dei frutteti (navigazione interfilare). La progettazione meccanica, insieme all'implementazione del software, sono stati dettagliati per evidenziarne i punti di forza, accanto ad alcuni ulteriori miglioramenti previsti per incrementarne le prestazioni complessive. I test di stabilità statica hanno dimostrato che il veicolo può resistere a ripidi pendii. Sono stati inoltre studiati miglioramenti per affinare la stima dello slittamento che si verifica durante le manovre di svolta, tipico dei veicoli cingolati. L'architettura software è stata implementata utilizzando il framework Robot Operating System (ROS), in modo da sfruttare i pacchetti disponibili relativi a componenti base, come le interfacce dei sensori, e consentendo al contempo un'implementazione personalizzata degli algoritmi di navigazione sviluppati. I test in condizioni reali all'interno dei frutteti sperimentali dell'università hanno dimostrato la robustezza e la stabilità della soluzione con oltre 800 ore di lavoro sul campo. Il veicolo ha permesso di attivare e svolgere un'ampia gamma di attività agricole in maniera autonoma, come l'irrorazione, la falciatura e la raccolta di dati sul campo. Questi ultimi possono essere sfruttati per stimare automaticamente le proprietà più rilevanti del frutteto, come il conteggio e la calibratura dei frutti, la stima delle proprietà della chioma e la raccolta autonoma dei frutti con stime post-raccolta

Assessment of the cutting performance of a robot mower using custom built software.

Before the introduction of positioning technologies in agriculture practices such as global navigation satellite systems (GNSS), data collection and management were time-consuming and labor-intensive tasks. Today, due to the introduction of advanced technologies, precise information on the performance of agricultural machines, and smaller autonomous vehicles such as robot mowers, can be collected in a relatively short time. The aim of this work was to track the performance of a robot mower in various turfgrass areas of an equal number of square meters but with four dierent shapes by using real-time kinematic (RTK)-GNSS devices, and to easily extract data by a custom built software capable of calculating the distance travelled by the robot mower, the forward speed, the cutting area, and the number of intersections of the trajectories. These data were then analyzed in order to provide useful functioning information for manufacturers, entrepreneurs, and practitioners. The path planning of the robot mower was random and the turfgrass area for each of the four shapes was 135 m2 without obstacles. The distance travelled by the robot mower, the mean forward speed, and the intersections of the trajectories were aected by the interaction between the time of cutting and the shape of the turfgrass. For all the dierent shapes, the whole turfgrass area was completely cut after two hours of mowing. The cutting eciency decreased by increasing the time, as a consequence of the increase in overlaps. After 75 minutes of cutting, the eciency was about 35% in all the turfgrass areas shapes, thus indicating a high level of overlapping

Simulation and optimization of robotic tasks for UV treatment of diseases in horticulture

Robotization is increasingly used in the agriculture since the last few decades. It is progressively replacing the human workforce that is deserting the agricultural sector, partly because of the harshness of its activities and health risks they may present. Moreover, robotization aims to improve efficiency and competitiveness of the agricultural sector. However, it leads to several research and development challenges regarding robots supervision, control and optimization. This paper presents a simulation and optimization approach for the optimization of robotized treatment tasks using type-c ultraviolet radiation in horticulture. The optimization of tasks scheduling problem is formalized and a heuristic and a genetic algorithms are proposed to solve it. These algorithms are evaluated compared to an exact method using a multiagent-based simulation approach. The simulator takes into account the evolution of the disease during time and simulates the execution of treatment tasks by the robot.Interreg North-West Europe Programme in context of UV-ROBOT