79,635 research outputs found
Recommended from our members
A survey of simulation techniques in commerce and defence
Despite the developments in Modelling and Simulation (M&S) tools and techniques over the past years, there has been a gap in the M&S research and practice in healthcare on developing a toolkit to assist the modellers and simulation practitioners with selecting an appropriate set of techniques. This study is a preliminary step towards this goal. This paper presents some results from a systematic literature survey on applications of M&S in the commerce and defence domains that could inspire some improvements in the healthcare. Interim results show that in the commercial sector Discrete-Event Simulation (DES) has been the most widely used technique with System Dynamics (SD) in second place. However in the defence sector, SD has gained relatively more attention. SD has been found quite useful for qualitative and soft factors analysis. From both the surveys it becomes clear that there is a growing trend towards using hybrid M&S approaches
A virtual environment to support the distributed design of large made-to-order products
An overview of a virtual design environment (virtual platform) developed as part of the European Commission funded VRShips-ROPAX (VRS) project is presented. The main objectives for the development of the virtual platform are described, followed by the discussion of the techniques chosen to address the objectives, and finally a description of a use-case for the platform. Whilst the focus of the VRS virtual platform was to facilitate the design of ROPAX (roll-on passengers and cargo) vessels, the components within the platform are entirely generic and may be applied to the distributed design of any type of vessel, or other complex made-to-order products
Recommended from our members
CAN CHANGE PREDICTION HELP PRIORITISE REDESIGN WORK IN FUTURE ENGINEERING SYSTEMS?
Future design environments will necessitate improved management of the propagation and impacts of changes. To ascertain whether change prediction can assist in making better work prioritisation decisions, this paper develops a new simulation approach and applies it to a model of a complex aerospace product, which was elicited from industry. We use an accepted technique to generate potential change propagation trees and apply Monte Carlo methods to generate a sample space within which multiple scheduling policies could be evaluated and compared. The experiments reveal that poor coordination of change activity can result in significant process inefficiencies, that the potential for inefficiency increases for larger change networks, and that a modest ability to accurately predict change propagation in the specific case at hand could have a dramatic effect in reducing unnecessary rework. The experiments also suggest that the capability of predicting multiple steps of change propagation would provide only minimal additional improvement.International Design Conference - DESIGN 201
History friendly simulations for modelling industrial dynamics
simulation, models, industrial dynamics
2011 Strategic roadmap for Australian research infrastructure
The 2011 Roadmap articulates the priority research infrastructure areas of a national scale (capability areas) to further develop Australiaâs research capacity and improve innovation and
research outcomes over the next five to ten years. The capability areas have been identified through considered analysis of input provided by stakeholders, in conjunction with specialist advice from Expert Working Groups
It is intended the Strategic Framework will provide a high-level policy framework, which will include principles to guide the development of policy advice and the design of programs related to the funding of research infrastructure by the Australian Government. Roadmapping has been identified in the Strategic Framework Discussion Paper as the most appropriate prioritisation mechanism for national, collaborative research infrastructure. The strategic identification of Capability areas through a consultative roadmapping process was also validated in the report of the 2010 NCRIS Evaluation.
The 2011 Roadmap is primarily concerned with medium to large-scale research infrastructure. However, any landmark infrastructure (typically involving an investment in excess of $100 million over five years from the Australian Government) requirements identified in this process will be noted. NRIC has also developed a âProcess to identify and prioritise Australian Government landmark research infrastructure investmentsâ which is currently under consideration by the government as part of broader deliberations relating to research infrastructure.
NRIC will have strategic oversight of the development of the 2011 Roadmap as part of its overall policy view of research infrastructure
Alternative sweetener from curculigo fruits
This study gives an overview on the advantages of Curculigo Latifolia as an alternative sweetener and a health product. The purpose of this research is to provide another option to the people who suffer from diabetes. In this research, Curculigo Latifolia was chosen, due to its unique properties and widely known species in Malaysia. In order to obtain the sweet protein from the fruit, it must go through a couple of procedures. First we harvested the fruits from the Curculigo trees that grow wildly in the garden. Next, the Curculigo fruits were dried in the oven at 50 0C for 3 days. Finally, the dried fruits were blended in order to get a fine powder. Curculin is a sweet protein with a taste-modifying activity of converting sourness to sweetness. The curculin content from the sample shown are directly proportional to the mass of the Curculigo fine powder. While the FTIR result shows that the sample spectrum at peak 1634 cmâ1 contains secondary amines. At peak 3307 cmâ1 contains alkynes
Risk management implementation in small and medium enterprises in the UK construction industry
Purpose
â The competition and challenges facing construction firms during the recent recession have brought risk management (RM) to the fore in peopleâs minds. Examination of the difficulties of implementing RM in small and medium enterprises (SMEs) in the UK construction industry has been relatively untouched. The paper aims to discuss these issues.
Design/methodology/approach
â As part of on-going research to facilitate RM processing aimed at improving the competitiveness of SMEs, the difficulties in RM implementation were identified through a literature review of RM implementation in SMEs. Postal questionnaire were sent to SMEs who have experience of construction management.
Findings
â Of the 153 of SMEs responding, most highlighted that the main difficulty experienced is how to scale RM process to meet their requirements. None of the available standards explain the fundamental principle of applying RM to the situations that SMEs find themselves in. This difficulty is further exacerbated by a lack of management skills and knowledge in the adoption of RM tools or techniques to identify and analyse the businessâ risks.
Originality/value
â The identified difficulties can be considered to develop a process to facilitate RM process within SMEs.
</jats:sec
Process intensification for post combustion COâ capture with chemical absorption: a critical review
The concentration of COâ in the atmosphere is increasing rapidly. COâ emissions may have an impact on global climate change. Effective COâ emission abatement strategies such as carbon capture and storage (CCS) are required to combat this trend. Compared with pre-combustion carbon capture and oxy-fuel carbon capture approaches, post-combustion COâ capture (PCC) using solvent process is one of the most mature carbon capture technologies. There are two main barriers for the PCC process using solvent to be commercially deployed: (a) high capital cost; (b) high thermal efficiency penalty due to solvent regeneration. Applying process intensification (PI) technology into PCC with solvent process has the potential to significantly reduce capital costs compared with conventional technology using packed columns. This paper intends to evaluate different PI technologies for their suitability in PCC process. The study shows that rotating packed bed (RPB) absorber/stripper has attracted much interest due to its high mass transfer capability. Currently experimental studies on COâ capture using RPB are based on standalone absorber or stripper. Therefore a schematic process flow diagram of intensified PCC process is proposed so as to motivate other researches for possible optimal design, operation and control. To intensify heat transfer in reboiler, spinning disc technology is recommended. To replace cross heat exchanger in conventional PCC (with packed column) process, printed circuit heat exchanger will be preferred. Solvent selection for conventional PCC process has been studied extensively. However, it needs more studies for solvent selection in intensified PCC process. The authors also predicted research challenges in intensified PCC process and potential new breakthrough from different aspects
1992 NASA Life Support Systems Analysis workshop
The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements
- âŠ