D2D-based Cooperative Positioning Paradigm for Future Wireless Systems: A Survey

Emerging communication network applications require a location accuracy of less than 1m in more than 95% of the service area. For this purpose, 5G New Radio (NR) technology is designed to facilitate high-accuracy continuous localization. In 5G systems, the existence of high-density small cells and the possibility of the device-to-device (D2D) communication between mobile terminals paves the way for cooperative positioning applications. From the standardization perspective, D2D technology is already under consideration (5G NR Release 16) for ultra-dense networks enabling cooperative positioning and is expected to achieve the ubiquitous positioning of below one-meter accuracy, thereby fulfilling the 5G requirements. In this survey, the strengths and weaknesses of D2D as an enabling technology for cooperative cellular positioning are analyzed (including two D2D approaches to perform cooperative positioning); lessons learned and open issues are highlighted to serve as guidelines for future research

Distributed localisation algorithm for wireless ad hoc networks of moving nodes

Existing ad hoc network localisation solutions rely either on external location references or network-wide exchange of information and centralised processing and computation of location estimates. Without these, nodes are not able to estimate the relative locations of other nodes within their communication range. This thesis defines a new distributed localisation algorithm for ad hoc networks of moving nodes. The Relative Neighbour Localisation (RNL) algorithm works without any external localisation signal or systems and does not assume centralised information processing. The idea behind the location estimates produced by the RNL algorithm is the relationship between the relative locations of two nodes, their mobility parameters and the signal strengths measured between them. The proposed algorithm makes use of the data available to each node to produce a location estimate. The signal strength each node is capable of measuring is used as one algorithm input. The other input is the velocity vector of the neighbouring node, composed of its speed and direction of movement, which each node is assumed to periodically broadcast. The relationship between the signal strength and the mobility parameters on one, and the relative location on the other side can be analytically formulated in an ideal case. The limitations of a realistic scenario complicate this relationship, making it very difficult to formulate analytically. An empirical approach is thus used. The angle and the distance estimates are individually computed, together forming a two-dimensional location estimate. The performance of the algorithm was analysed in detail using simulation, showing a median estimate error of under 10m, and its application was tested through design and evaluation of a distributed sensing coverage algorithm, showing RNL location estimates can provide 90% of the coverage achievable with true locations being known

Location-Enabled IoT (LE-IoT): A Survey of Positioning Techniques, Error Sources, and Mitigation

The Internet of Things (IoT) has started to empower the future of many industrial and mass-market applications. Localization techniques are becoming key to add location context to IoT data without human perception and intervention. Meanwhile, the newly-emerged Low-Power Wide-Area Network (LPWAN) technologies have advantages such as long-range, low power consumption, low cost, massive connections, and the capability for communication in both indoor and outdoor areas. These features make LPWAN signals strong candidates for mass-market localization applications. However, there are various error sources that have limited localization performance by using such IoT signals. This paper reviews the IoT localization system through the following sequence: IoT localization system review -- localization data sources -- localization algorithms -- localization error sources and mitigation -- localization performance evaluation. Compared to the related surveys, this paper has a more comprehensive and state-of-the-art review on IoT localization methods, an original review on IoT localization error sources and mitigation, an original review on IoT localization performance evaluation, and a more comprehensive review of IoT localization applications, opportunities, and challenges. Thus, this survey provides comprehensive guidance for peers who are interested in enabling localization ability in the existing IoT systems, using IoT systems for localization, or integrating IoT signals with the existing localization sensors

Direct communication radio Iinterface for new radio multicasting and cooperative positioning

Cotutela: Universidad de defensa UNIVERSITA’ MEDITERRANEA DI REGGIO CALABRIARecently, the popularity of Millimeter Wave (mmWave) wireless networks has increased due to their capability to cope with the escalation of mobile data demands caused by the unprecedented proliferation of smart devices in the fifth-generation (5G). Extremely high frequency or mmWave band is a fundamental pillar in the provision of the expected gigabit data rates. Hence, according to both academic and industrial communities, mmWave technology, e.g., 5G New Radio (NR) and WiGig (60 GHz), is considered as one of the main components of 5G and beyond networks. Particularly, the 3rd Generation Partnership Project (3GPP) provides for the use of licensed mmWave sub-bands for the 5G mmWave cellular networks, whereas IEEE actively explores the unlicensed band at 60 GHz for the next-generation wireless local area networks. In this regard, mmWave has been envisaged as a new technology layout for real-time heavy-traffic and wearable applications. This very work is devoted to solving the problem of mmWave band communication system while enhancing its advantages through utilizing the direct communication radio interface for NR multicasting, cooperative positioning, and mission-critical applications. The main contributions presented in this work include: (i) a set of mathematical frameworks and simulation tools to characterize multicast traffic delivery in mmWave directional systems; (ii) sidelink relaying concept exploitation to deal with the channel condition deterioration of dynamic multicast systems and to ensure mission-critical and ultra-reliable low-latency communications; (iii) cooperative positioning techniques analysis for enhancing cellular positioning accuracy for 5G+ emerging applications that require not only improved communication characteristics but also precise localization. Our study indicates the need for additional mechanisms/research that can be utilized: (i) to further improve multicasting performance in 5G/6G systems; (ii) to investigate sideline aspects, including, but not limited to, standardization perspective and the next relay selection strategies; and (iii) to design cooperative positioning systems based on Device-to-Device (D2D) technology

Physical Layer Challenges and Solutions in Seamless Positioning via GNSS, Cellular and WLAN Systems

As different positioning applications have started to be a common part of our lives, positioning methods have to cope with increasing demands. Global Navigation Satellite System (GNSS) can offer accurate location estimate outdoors, but achieving seamless large-scale indoor localization remains still a challenging topic. The requirements for simple and cost-effective indoor positioning system have led to the utilization of wireless systems already available, such as cellular networks and Wireless Local Area Network (WLAN). One common approach with the advantage of a large-scale standard-independent implementation is based on the Received Signal Strength (RSS) measurements.This thesis addresses both GNSS and non-GNSS positioning algorithms and aims to offer a compact overview of the wireless localization issues, concentrating on some of the major challenges and solutions in GNSS and RSS-based positioning. The GNSS-related challenges addressed here refer to the channel modelling part for indoor GNSS and to the acquisition part in High Sensitivity (HS)-GNSS. The RSSrelated challenges addressed here refer to the data collection and calibration, channel effects such as path loss and shadowing, and three-dimensional indoor positioning estimation.This thesis presents a measurement-based analysis of indoor channel models for GNSS signals and of path loss and shadowing models for WLAN and cellular signals. Novel low-complexity acquisition algorithms are developed for HS-GNSS. In addition, a solution to transmitter topology evaluation and database reduction solutions for large-scale mobile-centric RSS-based positioning are proposed. This thesis also studies the effect of RSS offsets in the calibration phase and various floor estimators, and offers an extensive comparison of different RSS-based positioning algorithms

EWOk: towards efficient multidimensional compression of indoor positioning datasets

Indoor positioning performed directly at the end-user device ensures reliability in case the network connection fails but is limited by the size of the RSS radio map necessary to match the measured array to the device’s location. Reducing the size of the RSS database enables faster processing, and saves storage space and radio resources necessary for the database transfer, thus cutting implementation and operation costs, and increasing the quality of service. In this work, we propose EWOk, an Element-Wise cOmpression using k-means, which reduces the size of the individual radio measurements within the fingerprinting radio map while sustaining or boosting the dataset’s positioning capabilities. We show that the 7-bit representation of measurements is sufficient in positioning scenarios, and reducing the data size further using EWOk results in higher compression and faster data transfer and processing. To eliminate the inherent uncertainty of k-means we propose a data-dependent, non-random initiation scheme to ensure stability and limit variance. We further combine EWOk with principal component analysis to show its applicability in combination with other methods, and to demonstrate the efficiency of the resulting multidimensional compression. We evaluate EWOk on 25 RSS fingerprinting datasets and show that it positively impacts compression efficiency, and positioning performance.This work was supported by the European Union’s Horizon 2020 Research and Innovation programme under the Marie Sklodowska Curie grant agreements No. 813278 (A-WEAR: A network for dynamic wearable applications with privacy constraints, http://www.a-wear.eu/) and No. 101023072 (ORIENTATE: Low-cost Reliable Indoor Positioning in Smart Factories, http://orientate.dsi.uminho.pt) and Academy of Finland (grants #319994, #323244)

Understanding mobile network quality and infrastructure with user-side measurements

Measurement collection is a primary step towards analyzing and optimizing performance of a telecommunication service. With an Mobile Broadband (MBB) network, the measurement process has not only to track the network’s Quality of Service (QoS) features but also to asses a user’s perspective about its service performance. The later requirement leads to “user-side measurements” which assist in discovery of performance issues that makes a user of a service unsatisfied and finally switch to another network. User-side measurements also serve as first-hand survey of the problem domain. In this thesis, we exhibit the potential in the measurements collected at network edge by considering two well-known approaches namely crowdsourced and distributed testbed-based measurements. Primary focus is on exploiting crowdsourced measurements while dealing with the challenges associated with it. These challenges consist of differences in sampling densities at different parts of the region, skewed and non-uniform measurement layouts, inaccuracy in sampling locations, differences in RSS readings due to device-diversity and other non-ideal measurement sampling characteristics. In presence of heterogeneous characteristics of the user-side measurements we propose how to accurately detect mobile coverage holes, to devise sample selection process so to generate a reliable radio map with reduced sample cost, and to identify cellular infrastructure at places where the information is not public. Finally, the thesis unveils potential of a distributed measurement test-bed in retrieving performance features from domains including user’s context, service content and network features, and understanding impact from these features upon the MBB service at the application layer. By taking web-browsing as a case study, it further presents an objective web-browsing Quality of Experience (QoE) model