A Proactive Approach to Detect IoT Based Flooding Attacks by Using Software Defined Networks and Manufacturer Usage Descriptions

abstract: The advent of the Internet of Things (IoT) and its increasing appearances in Small Office/Home Office (SOHO) networks pose a unique issue to the availability and health of the Internet at large. Many of these devices are shipped insecurely, with poor default user and password credentials and oftentimes the general consumer does not have the technical knowledge of how they may secure their devices and networks. The many vulnerabilities of the IoT coupled with the immense number of existing devices provide opportunities for malicious actors to compromise such devices and use them in large scale distributed denial of service attacks, preventing legitimate users from using services and degrading the health of the Internet in general. This thesis presents an approach that leverages the benefits of an Internet Engineering Task Force (IETF) proposed standard named Manufacturer Usage Descriptions, that is used in conjunction with the concept of Software Defined Networks (SDN) in order to detect malicious traffic generated from IoT devices suspected of being utilized in coordinated flooding attacks. The approach then works towards the ability to detect these attacks at their sources through periodic monitoring of preemptively permitted flow rules and determining which of the flows within the permitted set are misbehaving by using an acceptable traffic range using Exponentially Weighted Moving Averages (EWMA).Dissertation/ThesisMasters Thesis Computer Science 201

On the Edge of Secure Connectivity via Software-Defined Networking

Securing communication in computer networks has been an essential feature ever since the Internet, as we know it today, was started. One of the best known and most common methods for secure communication is to use a Virtual Private Network (VPN) solution, mainly operating with an IP security (IPsec) protocol suite originally published in 1995 (RFC1825). It is clear that the Internet, and networks in general, have changed dramatically since then. In particular, the onset of the Cloud and the Internet-of-Things (IoT) have placed new demands on secure networking. Even though the IPsec suite has been updated over the years, it is starting to reach the limits of its capabilities in its present form. Recent advances in networking have thrown up Software-Defined Networking (SDN), which decouples the control and data planes, and thus centralizes the network control. SDN provides arbitrary network topologies and elastic packet forwarding that have enabled useful innovations at the network level. This thesis studies SDN-powered VPN networking and explains the benefits of this combination. Even though the main context is the Cloud, the approaches described here are also valid for non-Cloud operation and are thus suitable for a variety of other use cases for both SMEs and large corporations. In addition to IPsec, open source TLS-based VPN (e.g. OpenVPN) solutions are often used to establish secure tunnels. Research shows that a full-mesh VPN network between multiple sites can be provided using OpenVPN and it can be utilized by SDN to create a seamless, resilient layer-2 overlay for multiple purposes, including the Cloud. However, such a VPN tunnel suffers from resiliency problems and cannot meet the increasing availability requirements. The network setup proposed here is similar to Software-Defined WAN (SD-WAN) solutions and is extremely useful for applications with strict requirements for resiliency and security, even if best-effort ISP is used. IPsec is still preferred over OpenVPN for some use cases, especially by smaller enterprises. Therefore, this research also examines the possibilities for high availability, load balancing, and faster operational speeds for IPsec. We present a novel approach involving the separation of the Internet Key Exchange (IKE) and the Encapsulation Security Payload (ESP) in SDN fashion to operate from separate devices. This allows central management for the IKE while several separate ESP devices can concentrate on the heavy processing. Initially, our research relied on software solutions for ESP processing. Despite the ingenuity of the architectural concept, and although it provided high availability and good load balancing, there was no anti-replay protection. Since anti-replay protection is vital for secure communication, another approach was required. It thus became clear that the ideal solution for such large IPsec tunneling would be to have a pool of fast ESP devices, but to confine the IKE operation to a single centralized device. This would obviate the need for load balancing but still allow high availability via the device pool. The focus of this research thus turned to the study of pure hardware solutions on an FPGA, and their feasibility and production readiness for application in the Cloud context. Our research shows that FPGA works fluently in an SDN network as a standalone IPsec accelerator for ESP packets. The proposed architecture has 10 Gbps throughput, yet the latency is less than 10 µs, meaning that this architecture is especially efficient for data center use and offers increased performance and latency requirements. The high demands of the network packet processing can be met using several different approaches, so this approach is not just limited to the topics presented in this thesis. Global network traffic is growing all the time, so the development of more efficient methods and devices is inevitable. The increasing number of IoT devices will result in a lot of network traffic utilising the Cloud infrastructures in the near future. Based on the latest research, once SDN and hardware acceleration have become fully integrated into the Cloud, the future for secure networking looks promising. SDN technology will open up a wide range of new possibilities for data forwarding, while hardware acceleration will satisfy the increased performance requirements. Although it still remains to be seen whether SDN can answer all the requirements for performance, high availability and resiliency, this thesis shows that it is a very competent technology, even though we have explored only a minor fraction of its capabilities

SUTMS - Unified Threat Management Framework for Home Networks

Home networks were initially designed for web browsing and non-business critical applications. As infrastructure improved, internet broadband costs decreased, and home internet usage transferred to e-commerce and business-critical applications. Today’s home computers host personnel identifiable information and financial data and act as a bridge to corporate networks via remote access technologies like VPN. The expansion of remote work and the transition to cloud computing have broadened the attack surface for potential threats. Home networks have become the extension of critical networks and services, hackers can get access to corporate data by compromising devices attacked to broad- band routers. All these challenges depict the importance of home-based Unified Threat Management (UTM) systems. There is a need of unified threat management framework that is developed specifically for home and small networks to address emerging security challenges. In this research, the proposed Smart Unified Threat Management (SUTMS) framework serves as a comprehensive solution for implementing home network security, incorporating firewall, anti-bot, intrusion detection, and anomaly detection engines into a unified system. SUTMS is able to provide 99.99% accuracy with 56.83% memory improvements. IPS stands out as the most resource-intensive UTM service, SUTMS successfully reduces the performance overhead of IDS by integrating it with the flow detection mod- ule. The artifact employs flow analysis to identify network anomalies and categorizes encrypted traffic according to its abnormalities. SUTMS can be scaled by introducing optional functions, i.e., routing and smart logging (utilizing Apriori algorithms). The research also tackles one of the limitations identified by SUTMS through the introduction of a second artifact called Secure Centralized Management System (SCMS). SCMS is a lightweight asset management platform with built-in security intelligence that can seamlessly integrate with a cloud for real-time updates

New Challenges in Quality of Services Control Architectures in Next Generation Networks

A mesura que Internet i les xarxes IP s'han anat integrant dins la societat i les corporacions, han anat creixent les expectatives de nous serveis convergents així com les expectatives de qualitat en les comunicacions. Les Next Generation Networks (NGN) donen resposta a les noves necessitats i representen el nou paradigma d'Internet a partir de la convergència IP. Un dels aspectes menys desenvolupats de les NGN és el control de la Qualitat del Servei (QoS), especialment crític en les comunicacions multimèdia a través de xarxes heterogènies i/o de diferents operadors. A més a més, les NGN incorporen nativament el protocol IPv6 que, malgrat les deficiències i esgotament d'adreces IPv4, encara no ha tingut l'impuls definitiu.Aquesta tesi està enfocada des d'un punt de vista pràctic. Així doncs, per tal de poder fer recerca sobre xarxes de proves (o testbeds) que suportin IPv6 amb garanties de funcionament, es fa un estudi en profunditat del protocol IPv6, del seu grau d'implementació i dels tests de conformància i interoperabilitat existents que avaluen la qualitat d'aquestes implementacions. A continuació s'avalua la qualitat de cinc sistemes operatius que suporten IPv6 mitjançant un test de conformància i s'implementa el testbed IPv6 bàsic, a partir del qual es farà la recerca, amb la implementació que ofereix més garanties.El QoS Broker és l'aportació principal d'aquesta tesi: un marc integrat que inclou un sistema automatitzat per gestionar el control de la QoS a través de sistemes multi-domini/multi-operador seguint les recomanacions de les NGN. El sistema automatitza els mecanismes associats a la configuració de la QoS dins d'un mateix domini (sistema autònom) mitjançant la gestió basada en polítiques de QoS i automatitza la negociació dinàmica de QoS entre QoS Brokers de diferents dominis, de forma que permet garantir QoS extrem-extrem sense fissures. Aquesta arquitectura es valida sobre un testbed de proves multi-domini que utilitza el mecanisme DiffServ de QoS i suporta IPv6.L'arquitectura definida en les NGN permet gestionar la QoS tant a nivell 3 (IP) com a nivell 2 (Ethernet, WiFi, etc.) de forma que permet gestionar també xarxes PLC. Aquesta tesi proposa una aproximació teòrica per aplicar aquesta arquitectura de control, mitjançant un QoS Broker, a les noves xarxes PLC que s'estan acabant d'estandarditzar, i discuteix les possibilitats d'aplicació sobre les futures xarxes de comunicació de les Smart Grids.Finalment, s'integra en el QoS Broker un mòdul per gestionar l'enginyeria del tràfic optimitzant els dominis mitjançant tècniques de intel·ligència artificial. La validació en simulacions i sobre un testbed amb routers Cisco demostra que els algorismes genètics híbrids són una opció eficaç en aquest camp.En general, les observacions i avenços assolits en aquesta tesi contribueixen a augmentar la comprensió del funcionament de la QoS en les NGN i a preparar aquests sistemes per afrontar problemes del món real de gran complexitat.A medida que Internet y las redes IP se han ido integrando dentro de la sociedad y las corporaciones, han ido creciendo las expectativas de nuevos servicios convergentes así como las expectativas de calidad en las comunicaciones. Las Next Generation Networks (NGN) dan respuesta a las nuevas necesidades y representan el nuevo paradigma de Internet a partir de la convergencia IP. Uno de los aspectos menos desarrollados de las NGN es el control de la Calidad del Servicio (QoS), especialmente crítico en las comunicaciones multimedia a través de redes heterogéneas y/o de diferentes operadores. Además, las NGN incorporan nativamente el protocolo IPv6 que, a pesar de las deficiencias y agotamiento de direcciones IPv4, aún no ha tenido el impulso definitivo.Esta tesis está enfocada desde un punto de vista práctico. Así pues, con tal de poder hacer investigación sobre redes de prueba (o testbeds) que suporten IPv6 con garantías de funcionamiento, se hace un estudio en profundidad del protocolo IPv6, de su grado de implementación y de los tests de conformancia e interoperabilidad existentes que evalúan la calidad de estas implementaciones. A continuación se evalua la calidad de cinco sistemas operativos que soportan IPv6 mediante un test de conformancia y se implementa el testbed IPv6 básico, a partir del cual se realizará la investigación, con la implementación que ofrece más garantías.El QoS Broker es la aportación principal de esta tesis: un marco integrado que incluye un sistema automatitzado para gestionar el control de la QoS a través de sistemas multi-dominio/multi-operador siguiendo las recomendaciones de las NGN. El sistema automatiza los mecanismos asociados a la configuración de la QoS dentro de un mismo dominio (sistema autónomo) mediante la gestión basada en políticas de QoS y automatiza la negociación dinámica de QoS entre QoS brokers de diferentes dominios, de forma que permite garantizar QoS extremo-extremo sin fisuras. Esta arquitectura se valida sobre un testbed de pruebas multi-dominio que utiliza el mecanismo DiffServ de QoS y soporta IPv6. La arquitectura definida en las NGN permite gestionar la QoS tanto a nivel 3 (IP) o como a nivel 2 (Ethernet, WiFi, etc.) de forma que permite gestionar también redes PLC. Esta tesis propone una aproximación teórica para aplicar esta arquitectura de control, mediante un QoS Broker, a las noves redes PLC que se están acabando de estandardizar, y discute las posibilidades de aplicación sobre las futuras redes de comunicación de las Smart Grids.Finalmente, se integra en el QoS Broker un módulo para gestionar la ingeniería del tráfico optimizando los dominios mediante técnicas de inteligencia artificial. La validación en simulaciones y sobre un testbed con routers Cisco demuestra que los algoritmos genéticos híbridos son una opción eficaz en este campo.En general, las observaciones y avances i avances alcanzados en esta tesis contribuyen a augmentar la comprensión del funcionamiento de la QoS en las NGN y en preparar estos sistemas para afrontar problemas del mundo real de gran complejidad.The steady growth of Internet along with the IP networks and their integration into society and corporations has brought with it increased expectations of new converged services as well as greater demands on quality in communications. The Next Generation Networks (NGNs) respond to these new needs and represent the new Internet paradigm from the IP convergence. One of the least developed aspects in the NGNs is the Quality of Service (QoS) control, which is especially critical in the multimedia communication through heterogeneous networks and/or different operators. Furthermore, the NGNs natively incorporate the IPv6 protocol which, despite its shortcomings and the depletion of IPv4 addresses has not been boosted yet.This thesis has been developed with a practical focus. Therefore, with the aim of carrying out research over testbeds supporting the IPv6 with performance guarantees, an in-depth study of the IPv6 protocol development has been conducted and its degree of implementation and the existing conformance and interoperability tests that evaluate these implementations have been studied. Next, the quality of five implementations has been evaluated through a conformance test and the basic IPv6 testbed has been implemented, from which the research will be carried out. The QoS Broker is the main contribution to this thesis: an integrated framework including an automated system for QoS control management through multi-domain/multi-operator systems according to NGN recommendations. The system automates the mechanisms associated to the QoS configuration inside the same domain (autonomous system) through policy-based management and automates the QoS dynamic negotiation between peer QoS Brokers belonging to different domains, so it allows the guarantee of seamless end-to-end QoS. This architecture is validated over a multi-domain testbed which uses the QoS DiffServ mechanism and supports IPv6.The architecture defined in the NGN allows QoS management at level 3 (IP) as well as at level 2 (e.g. Ethernet, WiFi) so it also facilitates the management of PLC networks. Through the use of a QoS Broker, this thesis proposes a theoretical approach for applying this control architecture to the newly standardized PLC networks, and discusses the possibilities of applying it over the future communication networks of the Smart Grids.Finally, a module for managing traffic engineering which optimizes the network domains through artificial intelligence techniques is integrated in the QoS Broker. The validations by simulations and over a Cisco router testbed demonstrate that hybrid genetic algorithms are an effective option in this area.Overall, the advances and key insights provided in this thesis help advance our understanding of QoS functioning in the NGNs and prepare these systems to face increasingly complex problems, which abound in current industrial and scientific applications

Use of locator/identifier separation to improve the future internet routing system

The Internet evolved from its early days of being a small research network to become a critical infrastructure many organizations and individuals rely on. One dimension of this evolution is the continuous growth of the number of participants in the network, far beyond what the initial designers had in mind. While it does work today, it is widely believed that the current design of the global routing system cannot scale to accommodate future challenges. In 2006 an Internet Architecture Board (IAB) workshop was held to develop a shared understanding of the Internet routing system scalability issues faced by the large backbone operators. The participants documented in RFC 4984 their belief that "routing scalability is the most important problem facing the Internet today and must be solved." A potential solution to the routing scalability problem is ending the semantic overloading of Internet addresses, by separating node location from identity. Several proposals exist to apply this idea to current Internet addressing, among which the Locator/Identifier Separation Protocol (LISP) is the only one already being shipped in production routers. Separating locators from identifiers results in another level of indirection, and introduces a new problem: how to determine location, when the identity is known. The first part of our work analyzes existing proposals for systems that map identifiers to locators and proposes an alternative system, within the LISP ecosystem. We created a large-scale Internet topology simulator and used it to compare the performance of three mapping systems: LISP-DHT, LISP+ALT and the proposed LISP-TREE. We analyzed and contrasted their architectural properties as well. The monitoring projects that supplied Internet routing table growth data over a large timespan inspired us to create LISPmon, a monitoring platform aimed at collecting, storing and presenting data gathered from the LISP pilot network, early in the deployment of the LISP protocol. The project web site and collected data is publicly available and will assist researchers in studying the evolution of the LISP mapping system. We also document how the newly introduced LISP network elements fit into the current Internet, advantages and disadvantages of different deployment options, and how the proposed transition mechanism scenarios could affect the evolution of the global routing system. This work is currently available as an active Internet Engineering Task Force (IETF) Internet Draft. The second part looks at the problem of efficient one-to-many communications, assuming a routing system that implements the above mentioned locator/identifier split paradigm. We propose a network layer protocol for efficient live streaming. It is incrementally deployable, with changes required only in the same border routers that should be upgraded to support locator/identifier separation. Our proof-of-concept Linux kernel implementation shows the feasibility of the protocol, and our comparison to popular peer-to-peer live streaming systems indicates important savings in inter-domain traffic. We believe LISP has considerable potential of getting adopted, and an important aspect of this work is how it might contribute towards a better mapping system design, by showing the weaknesses of current favorites and proposing alternatives. The presented results are an important step forward in addressing the routing scalability problem described in RFC 4984, and improving the delivery of live streaming video over the Internet

Data Communications and Network Technologies

This open access book is written according to the examination outline for Huawei HCIA-Routing Switching V2.5 certification, aiming to help readers master the basics of network communications and use Huawei network devices to set up enterprise LANs and WANs, wired networks, and wireless networks, ensure network security for enterprises, and grasp cutting-edge computer network technologies. The content of this book includes: network communication fundamentals, TCP/IP protocol, Huawei VRP operating system, IP addresses and subnetting, static and dynamic routing, Ethernet networking technology, ACL and AAA, network address translation, DHCP server, WLAN, IPv6, WAN PPP and PPPoE protocol, typical networking architecture and design cases of campus networks, SNMP protocol used by network management, operation and maintenance, network time protocol NTP, SND and NFV, programming, and automation. As the world’s leading provider of ICT (information and communication technology) infrastructure and smart terminals, Huawei’s products range from digital data communication, cyber security, wireless technology, data storage, cloud-computing, and smart computing to artificial intelligence

Data Communications and Network Technologies

This open access book is written according to the examination outline for Huawei HCIA-Routing Switching V2.5 certification, aiming to help readers master the basics of network communications and use Huawei network devices to set up enterprise LANs and WANs, wired networks, and wireless networks, ensure network security for enterprises, and grasp cutting-edge computer network technologies. The content of this book includes: network communication fundamentals, TCP/IP protocol, Huawei VRP operating system, IP addresses and subnetting, static and dynamic routing, Ethernet networking technology, ACL and AAA, network address translation, DHCP server, WLAN, IPv6, WAN PPP and PPPoE protocol, typical networking architecture and design cases of campus networks, SNMP protocol used by network management, operation and maintenance, network time protocol NTP, SND and NFV, programming, and automation. As the world’s leading provider of ICT (information and communication technology) infrastructure and smart terminals, Huawei’s products range from digital data communication, cyber security, wireless technology, data storage, cloud-computing, and smart computing to artificial intelligence

Estabelecimento de redes de comunidades sobreponíveis

Doutoramento em Engenharia InformáticaUma das áreas de investigação em Telecomunicações de interesse crescente prende-se com os futuros sistemas de comunicações móveis de 4a geração e além destes. Nos últimos anos tem sido desenvolvido o conceito de redes comunitárias, no qual os utilizadores se agregam de acordo com interesses comuns. Estes conceitos têm sido explorados de uma forma horizontal em diferentes camadas da comunicação, desde as redes comunitárias de comunicação (Seattle Wireless ou Personal Telco, p.ex.) até às redes de interesses peer-to-peer. No entanto, estas redes são usualmente vistas como redes de overlay, ou simplesmente redes de associação livre. Na prática, a noção de uma rede auto-organizada, completamente orientada ao serviço/comunidade, integralmente suportada em termos de arquitetura, não existe. Assim este trabalho apresenta uma realização original nesta área de criação de redes comunitárias, com uma arquitetura subjacente orientada a serviço, e que suporta integralmente múltiplas redes comunitárias no mesmo dispositivo, com todas as características de segurança, confiança e disponibilização de serviço necessárias neste tipo de cenários (um nó pode pertencer simultaneamente a mais do que uma rede comunitária). Devido à sua importância para os sistemas de redes comunitárias, foi dado particular atenção a aspetos de gestão de recursos e controlo de acessos. Ambos realizados de uma forma descentralizada e considerando mecanismos dotados de grande escalabilidade. Para isso, é apresentada uma linguagem de políticas que suporta a criação de comunidades virtuais. Esta linguagem não é apenas utilizada para o mapeamento da estrutura social dos membros da comunidade, como para, gerir dispositivos, recursos e serviços detidos pelos membros, de uma forma controlada e distribuída.One of the research areas with increasing interest in the field of telecommunications, are the ones related to future telecommunication systems, both 4th generation and beyond. In parallel, during the last years, several concepts have been developed related to clustering of users according to their interested, in the form of community networks. Solutions proposed for these concepts tackle the challenges horizontally, for each layer of the communication stack, ranging from community based communication networks (e.g. Seattle Wireless, or Personal Telco), to interest networks based on peer-to-peer protocols. However, these networks are presented either as free joining, or overlay networks. In practice, the notion of a self-organized, service and community oriented network, with these principles embedded in its design principles, is yet to be developed. This work presents an novel instantiation of a solution in the area of community networks, with a underlying architecture which is fully service oriented, and envisions the support for multiple community networks in the same device. Considerations regarding security, trust and service availability for this type of environments are also taken. Due to the importance of resource management and access control, in the context of community driven communication networks, a special focus was given to the support of scalable and decentralized management and access control methods. For this purpose, it is presented a policy language which supports the creation and management of virtual communities. The language is not only used for mapping the social structure of the community members, but also to, following a distributed approach, manage devices, resources and services owned by each community member

POWER LINE COMMUNICATIONS FOR SMART HOME NETWORKS: MODELING, SIMULATION AND OPTIMIZATION

In recent years, research and development efforts are devoted to the deployment of information and communication technology (ICT) within residential buildings and houses, in order to provide services that will increase the quality of life. Although this trend is originated in the late 60’s as a result of the application of industrial automation to residential buildings and houses, i.e., home automation, nowadays, further services are offered to the final users, i.e., home networking and energy management. In fact, a lot of effort is put on the joint delivery of these services in order to make the home, namely the smart home (SH), an integral part of the future smart grid (SG). The concept of SH can be described as a house equipped with electronic systems and appliances, namely, “smart” appliances, which are able to exchange information by means of a communication network. However, these systems are characterized by a broad variety of communication technologies, standards and protocols, so that they often cannot interconnect, and/or interoperate and in some cases even coexist. In our opinion, coexistence, interconnection and interoperability problems represents the bottleneck to a pervasive deployment of smart appliances and systems within residential buildings and houses. To this respect, the first topic that we consider in this thesis is the definition of the SH network architecture and devices, which allows to obtain convergence among smart appliances. To this aim, a survey of the communication technologies, standards, protocols and also media, which can be used for SH applications, is necessary in order to define a network topology that is able to be scalable, extensible, and rather reliable. Moreover, in order to achieve interconnectivity among “smart” appliances, we define a shared common layer that is able to manage heterogeneous lower layers allowing network convergence. Once defined the SH network architecture and its network devices, we focus on power line communication (PLC) technologies and we implement a network testbed in order to evaluate some of the functionalities of the SH network within real environments. From the analysis of field trial data, we are able to highlight performances and disadvantages of two representative narrow band PLC (NB-PLC) solutions. Furthermore, exploiting the network testbed where broadband PLC (BB-PLC) technology is used to provide an Ethernet backbone for NB-PLC devices, we achieve interconnectivity between heterogeneous devices and we observe a significant improvement of the performances. Although NB-PLC technologies have been conceived for the development of low data rate applications and, in particular, for automatic meter reading (AMR), we focus our attention on the G3-PLC technology, for which we propose enhancements at the medium access control (MAC) sub-layer to allow the implementation of SH applications that could potentially require higher data rate than AMR. The G3-PLC technology has been taken into account since (i) it has been used as baseline technology for the development of popular communication standards for SG applications, and (ii) we have found, from the field trials, that the performance of NB-PLC may be poor in large houses where the signal is strongly attenuated because it spans large distances and crosses different circuit breakers (CBs), e.g., in multi-floor houses. Furthermore, an innovative cross-platform simulator that allows to realistically simulate the G3-PLC technology up to the network layer is presented. The proposed cross-platform consists of two different simulators jointly connected: one for the physical (PHY) layer and one for the data link layer (DLL)/network layer (NL). The PHY layer simulator is implemented in MATLAB, while the DLL/network simulator in OMNeT++. A convergent network architecture that permits the integration of the G3-PLC technology within a switched Ethernet network is also presented with the aim of improving the G3-PLC performance in large scale houses/buildings. The performance of the considered communication technology are presented through extensive numerical results for the in-home application scenario. Finally, the cross-platform simulator is used to evaluate G3-PLC systems for SG applications in the access network scenario. This is fundamental since the interaction of the outside world, i.e., the access network, with the SH is mandatory in order to achieve and exploit the SG concept. Moreover, to improve the performance and coverage of G3-PLC, a simple adaptive tone mapping algorithm together with a routing algorithm are also presented.Ricerca condotta all'interno del WiPLi Lab/Wireless and Power Line Communications LaboratoryopenDottorato di ricerca in Ingegneria industriale e dell'informazioneopenDI BERT, Luc