Experimental and data analysis techniques for deducing collision-induced forces from photographic histories of engine rotor fragment impact/interaction with a containment ring

An analysis method termed TEJ-JET is described whereby measured transient elastic and inelastic deformations of an engine-rotor fragment-impacted structural ring are analyzed to deduce the transient external forces experienced by that ring as a result of fragment impact and interaction with the ring. Although the theoretical feasibility of the TEJ-JET concept was established, its practical feasibility when utilizing experimental measurements of limited precision and accuracy remains to be established. The experimental equipment and the techniques (high-speed motion photography) employed to measure the transient deformations of fragment-impacted rings are described. Sources of error and data uncertainties are identified. Techniques employed to reduce data reading uncertainties and to correct the data for optical-distortion effects are discussed. These procedures, including spatial smoothing of the deformed ring shape by Fourier series and timewise smoothing by Gram polynomials, are applied illustratively to recent measurements involving the impact of a single T58 turbine rotor blade against an aluminum containment ring. Plausible predictions of the fragment-ring impact/interaction forces are obtained by one branch of this TEJ-JET method; however, a second branch of this method, which provides an independent estimate of these forces, remains to be evaluated

Mechanical Properties of Microstructural Components of Inorganic Materials

Disertační práce se zabývá studiem strukturních a mechanických vlastností anorganických materiálů. Cílem je nalezení jednotlivých fází ve zkoumaném materiálu a hlavně lokalizace (mechanicky) nejslabšího místa, jeho ovlivnění a následně výroba materiálu o lepších mechanických vlastnostech. Z důvodu velkého množství použitých metod je základní teorie vložena vždy na začátku příslušné kapitoly. Taktéž z důvodu značného množství výsledků jsou na konci kapitol uvedeny dílčí závěry. Práce je rozdělena na tři části, kdy první se zabývá seznámením s možnostmi modelování mikro-mechanických vlastností a provedením experimentů umožňujících posouzení rozsahu platnosti některého modelu. V druhé části je provedeno shrnutí současných možností indentačních zkoušek pro měření mechanických vlastností strukturních složek betonu a praktické zvládnutí metodiky vhodné k užití pro výzkum materiálů zkoumaných domovským pracovištěm. V třetí části je navržena metoda identifikace nejslabších článků struktury anorganických pojiv a její ověření na konkrétním materiálu zkoumaném na domovském pracovišti. V této dizertační práci jsou použity tyto metody: kalorimetrie, ultrazvukové testování, jednoosá pevnost v tlaku, nanoindentace, korelativní mikroskopie a rastrovací elektronová mikroskopie s energiově disperzním spektrometrem. Dílčími výsledky jsou kompletní charakterizace cementových materiálů, upřesnění stávajících poznatků a nalezení optimálního postupu pro charakterizaci. Hlavním výsledkem je inovativní přístup vedoucí k pozitivnímu ovlivnění materiálu.The doctoral thesis deals with study of structural and mechanical properties of inorganic materials. Goal is to find the weakest (mechanically) phases and interfaces of material. By affecting these structures it should be possible consequently produce a material with better mechanical properties. Due to the large amount of used methods the basic theory is discussed always in the beginning of relevant chapter. Similarly, due to the considerable amount of results every chapter includes partial conclusions. The work is divided in three parts. The first deals with the introduction of the possibilities of modeling micro-mechanical properties and performing of experiments that allow assessment of the scope of some model. In second part itis performed an overview of current possibilities of indentation tests for measuring mechanical properties of structural components of concrete and the practical managing of methods suitable for use for materials research examined at our faculty. In third part the method of identifying the weakest points in structure of inorganic binders is proposed and validation on the particular material examined at our faculty is performed. The methods used in this doctoral thesis are: calorimetry, ultrasonic testing, uniaxial compression, nanoindentation, correlative microscopy and scanning electron microscopy with energy dispersive spectrometer. Partial results are a complete characterization of cementitious materials, specification of existing knowledge and finding the optimal procedure for characterization. The main result is an innovative approach that leads to a positive effect on the material.

NASA SBIR abstracts of 1991 phase 1 projects

The objectives of 301 projects placed under contract by the Small Business Innovation Research (SBIR) program of the National Aeronautics and Space Administration (NASA) are described. These projects were selected competitively from among proposals submitted to NASA in response to the 1991 SBIR Program Solicitation. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 301, in order of its appearance in the body of the report. Appendixes to provide additional information about the SBIR program and permit cross-reference of the 1991 Phase 1 projects by company name, location by state, principal investigator, NASA Field Center responsible for management of each project, and NASA contract number are included

The Search for Extraterrestrial Intelligence (SETI)

A bibliography of reports concerning the Search for Extraterrestrial Intelligence is presented. Cosmic evolution, space communication, and technological advances are discussed along with search strategies and search systems

A semantic methodology for (un)structured digital evidences analysis

Nowadays, more than ever, digital forensics activities are involved in any criminal, civil or military investigation and represent a fundamental tool to support cyber-security. Investigators use a variety of techniques and proprietary software forensic applications to examine the copy of digital devices, searching hidden, deleted, encrypted, or damaged files or folders. Any evidence found is carefully analysed and documented in a "finding report" in preparation for legal proceedings that involve discovery, depositions, or actual litigation. The aim is to discover and analyse patterns of fraudulent activities. In this work, a new methodology is proposed to support investigators during the analysis process, correlating evidences found through different forensic tools. The methodology was implemented through a system able to add semantic assertion to data generated by forensics tools during extraction processes. These assertions enable more effective access to relevant information and enhanced retrieval and reasoning capabilities

The Fluorescence Detector of the Pierre Auger Observatory

The Pierre Auger Observatory is a hybrid detector for ultra-high energy cosmic rays. It combines a surface array to measure secondary particles at ground level together with a fluorescence detector to measure the development of air showers in the atmosphere above the array. The fluorescence detector comprises 24 large telescopes specialized for measuring the nitrogen fluorescence caused by charged particles of cosmic ray air showers. In this paper we describe the components of the fluorescence detector including its optical system, the design of the camera, the electronics, and the systems for relative and absolute calibration. We also discuss the operation and the monitoring of the detector. Finally, we evaluate the detector performance and precision of shower reconstructions.Comment: 53 pages. Submitted to Nuclear Instruments and Methods in Physics Research Section

Design of a fault tolerant airborne digital computer. Volume 2: Computational requirements and technology

This final report summarizes the work on the design of a fault tolerant digital computer for aircraft. Volume 2 is composed of two parts. Part 1 is concerned with the computational requirements associated with an advanced commercial aircraft. Part 2 reviews the technology that will be available for the implementation of the computer in the 1975-1985 period. With regard to the computation task 26 computations have been categorized according to computational load, memory requirements, criticality, permitted down-time, and the need to save data in order to effect a roll-back. The technology part stresses the impact of large scale integration (LSI) on the realization of logic and memory. Also considered was module interconnection possibilities so as to minimize fault propagation