User Experience Enhancement on Smartphones using Wireless Communication Technologies

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 박세웅.Recently, various sensors as well as wireless communication technologies such as Wi-Fi and Bluetooth Low Energy (BLE) have been equipped with smartphones. In addition, in many cases, users use a smartphone while on the move, so if a wireless communication technologies and various sensors are used for a mobile user, a better user experience can be provided. For example, when a user moves while using Wi-Fi, the user experience can be improved by providing a seamless Wi-Fi service. In addition, it is possible to provide a special service such as indoor positioning or navigation by estimating the users mobility in an indoor environment, and additional services such as location-based advertising and payment systems can also be provided. Therefore, improving the user experience by using wireless communication technology and smartphones sensors is considered to be an important research field in the future. In this dissertation, we propose three systems that can improve the user experience or convenience by usingWi-Fi, BLE, and smartphones sensors: (i) BLEND: BLE beacon-aided fast Wi-Fi handoff for smartphones, (ii) PYLON: Smartphone based Indoor Path Estimation and Localization without Human Intervention, (iii) FINISH: Fully-automated Indoor Navigation using Smartphones with Zero Human Assistance. First, we propose fast handoff scheme called BLEND exploiting BLE as secondary radio. We conduct detailed analysis of the sticky client problem on commercial smartphones with experiment and close examination of Android source code. We propose BLEND, which exploits BLE modules to provide smartphones with prior knowledge of the presence and information of APs operating at 2.4 and 5 GHz Wi-Fi channels. BLEND operating with only application requires no hardware and Android source code modification of smartphones.We prototype BLEND with commercial smartphones and evaluate the performance in real environment. Our measurement results demonstrate that BLEND significantly improves throughput and video bitrate by up to 61% and 111%, compared to a commercial Android application, respectively, with negligible energy overhead. Second, we design a path estimation and localization system, termed PYLON, which is plug-and-play on Android smartphones. PYLON includes a novel landmark correction scheme that leverages real doors of indoor environments consisting of floor plan mapping, door passing time detection and correction. It operates without any user intervention. PYLON relaxes some requirements for localization systems. It does not require any modifications to hardware or software of smartphones, and the initial location of WiFi APs, BLE beacons, and users. We implement PYLON on five Android smartphones and evaluate it on two office buildings with the help of three participants to prove applicability and scalability. PYLON achieves very high floor plan mapping accuracy with a low localization error. Finally, We design a fully-automated navigation system, termed FINISH, which addresses the problems of existing previous indoor navigation systems. FINISH generates the radio map of an indoor building based on the localization system to determine the initial location of the user. FINISH relaxes some requirements for current indoor navigation systems. It does not require any human assistance to provide navigation instructions. In addition, it is plug-and-play on Android smartphones. We implement FINISH on five Android smartphones and evaluate it on five floors of an office building with the help of multiple users to prove applicability and scalability. FINISH determines the location of the user with extremely high accuracy with in one step. In summary, we propose systems that enhance the users convenience and experience by utilizing wireless infrastructures such as Wi-Fi and BLE and various smartphones sensors such as accelerometer, gyroscope, and barometer equipped in smartphones. Systems are implemented on commercial smartphones to verify the performance through experiments. As a result, systems show the excellent performance that can enhance the users experience.1 Introduction 1 1.1 Motivation 1 1.2 Overview of Existing Approaches 3 1.2.1 Wi-Fi handoff for smartphones 3 1.2.2 Indoor path estimation and localization 4 1.2.3 Indoor navigation 5 1.3 Main Contributions 7 1.3.1 BLEND: BLE Beacon-aided Fast Handoff for Smartphones 7 1.3.2 PYLON: Smartphone Based Indoor Path Estimation and Localization with Human Intervention 8 1.3.3 FINISH: Fully-automated Indoor Navigation using Smartphones with Zero Human Assistance 9 1.4 Organization of Dissertation 10 2 BLEND: BLE Beacon-Aided FastWi-Fi Handoff for Smartphones 11 2.1 Introduction 11 2.2 Related Work 14 2.2.1 Wi-Fi-based Handoff 14 2.2.2 WPAN-aided AP Discovery 15 2.3 Background 16 2.3.1 Handoff Procedure in IEEE 802.11 16 2.3.2 BSS Load Element in IEEE 802.11 16 2.3.3 Bluetooth Low Energy 17 2.4 Sticky Client Problem 17 2.4.1 Sticky Client Problem of Commercial Smartphone 17 2.4.2 Cause of Sticky Client Problem 20 2.5 BLEND: Proposed Scheme 21 2.5.1 Advantages and Necessities of BLE as Secondary Low-Power Radio 21 2.5.2 Overall Architecture 22 2.5.3 AP Operation 23 2.5.4 Smartphone Operation 24 2.5.5 Verification of aTH estimation 28 2.6 Performance Evaluation 30 2.6.1 Implementation and Measurement Setup 30 2.6.2 Saturated Traffic Scenario 31 2.6.3 Video Streaming Scenario 35 2.7 Summary 38 3 PYLON: Smartphone based Indoor Path Estimation and Localization without Human Intervention 41 3.1 Introduction 41 3.2 Background and Related Work 44 3.2.1 Infrastructure-Based Localization 44 3.2.2 Fingerprint-Based Localization 45 3.2.3 Model-Based Localization 45 3.2.4 Dead Reckoning 46 3.2.5 Landmark-Based Localization 47 3.2.6 Simultaneous Localization and Mapping (SLAM) 47 3.3 System Overview 48 3.3.1 Notable RSSI Signature 49 3.3.2 Smartphone Operation 50 3.3.3 Server Operation 51 3.4 Path Estimation 52 3.4.1 Step Detection 52 3.4.2 Step Length Estimation 54 3.4.3 Walking Direction 54 3.4.4 Location Update 55 3.5 Landmark Correction Part 1: Virtual Room Generation 56 3.5.1 RSSI Stacking Difference 56 3.5.2 Virtual Room Generation 57 3.5.3 Virtual Graph Generation 59 3.5.4 Physical Graph Generation 60 3.6 Landmark Correction Part 2: From Floor Plan Mapping to Path Correction 60 3.6.1 Candidate Graph Generation 60 3.6.2 Backbone Node Mapping 62 3.6.3 Dead-end Node Mapping 65 3.6.4 Final Candidate Graph Selection 66 3.6.5 Door Passing Time Detection 68 3.6.6 Path Correction 70 3.7 Particle Filter 71 3.8 Performance Evaluation 73 3.8.1 Implementation and Measurement Setup 73 3.8.2 Step Detection Accuracy 77 3.8.3 Floor Plan Mapping Accuracy 77 3.8.4 Door Passing Time 78 3.8.5 Walking Direction and Localization Performance 81 3.8.6 Impact of WiFi AP and BLE Beacon Number 84 3.8.7 Impact of Walking Distance and Speed 84 3.8.8 Performance on Different Areas 87 3.9 Summary 87 4 FINISH: Fully-automated Indoor Navigation using Smartphones with Zero Human Assistance 91 4.1 Introduction 91 4.2 Related Work 92 4.2.1 Localization-based Navigation System 92 4.2.2 Peer-to-peer Navigation System 93 4.3 System Overview 93 4.3.1 System Architecture 93 4.3.2 An Example for Navigation 95 4.4 Level Change Detection and Floor Decision 96 4.4.1 Level Change Detection 96 4.5 Real-time navigation 97 4.5.1 Initial Floor and Location Decision 97 4.5.2 Orientation Adjustment 98 4.5.3 Shortest Path Estimation 99 4.6 Performance Evaluation 99 4.6.1 Initial Location Accuracy 99 4.6.2 Real-Time Navigation Accuracy 100 4.7 Summary 101 5 Conclusion 102 5.1 Research Contributions 102 5.2 Future Work 103 Abstract (In Korean) 118 감사의 글Docto

System Architecture for Low-Power Ubiquitously Connected Remote Health Monitoring Applications With Smart Transmission Mechanism

We present a novel smart transmission technique with seamless handoff mechanism to achieve ubiquitous connectivity using multiple on-chip radios targeting remote health monitoring applications. For the first time to the best of our knowledge, a system architecture for low-power ubiquitously connected multiparametric remote health monitoring system is proposed in this paper. The architecture proposed uses a generic adaptive rule engine for classifying the collected multiparametric data from patient and smartly transmit the data when only needed. The on-chip seamless handoff mechanism proposed aids for the ubiquitous connectivity with a very good energy savings by intelligent controlling of the multiple on-chip radios. The performance analysis of the proposed on-chip seamless handoff mechanism along with adaptive rule engine-based smart transmission mechanism achieves on an average of 50.39% of energy saving and 51.01% reduction in duty cycle of transmitter taken over 20 users compared with the continuous transmission. From the hardware complexity analysis made on the proposed seamless handoff controller and adaptive rule engine concludes that they require only 2082 CMOS transistors for real-time implementation

Human Behavior Cognition Using Smartphone Sensors

Peer reviewe

Bit error rate estimation in WiMAX communications at vehicular speeds using Nakagami-m fading model

The wireless communication industry has experienced a rapid technological evolution from its basic first generation (1G) wireless systems to the latest fourth generation (4G) wireless broadband systems. Wireless broadband systems are becoming increasingly popular with consumers and the technological strength of 4G has played a major role behind the success of wireless broadband systems. The IEEE 802.16m standard of the Worldwide Interoperability for Microwave Access (WiMAX) has been accepted as a 4G standard by the Institute of Electrical and Electronics Engineers in 2011. The IEEE 802.16m is fully optimised for wireless communications in fixed environments and can deliver very high throughput and excellent quality of service. In mobile communication environments however, WiMAX consumers experience a graceful degradation of service as a direct function of vehicular speeds. At high vehicular speeds, the throughput drops in WiMAX systems and unless proactive measures such as forward error control and packet size optimisation are adopted and properly adjusted, many applications cannot be facilitated at high vehicular speeds in WiMAX communications. For any proactive measure, bit error rate estimation as a function of vehicular speed, serves as a useful tool. In this thesis, we present an analytical model for bit error rate estimation in WiMAX communications using the Nakagami-m fading model. We also show, through an analysis of the data collected from a practical WiMAX system, that the Nakagami-m model can be made adaptive as a function of speed, to represent fading in fixed environments as well as mobile environments

Context Awareness for Navigation Applications

This thesis examines the topic of context awareness for navigation applications and asks the question, “What are the benefits and constraints of introducing context awareness in navigation?” Context awareness can be defined as a computer’s ability to understand the situation or context in which it is operating. In particular, we are interested in how context awareness can be used to understand the navigation needs of people using mobile computers, such as smartphones, but context awareness can also benefit other types of navigation users, such as maritime navigators. There are countless other potential applications of context awareness, but this thesis focuses on applications related to navigation. For example, if a smartphone-based navigation system can understand when a user is walking, driving a car, or riding a train, then it can adapt its navigation algorithms to improve positioning performance. We argue that the primary set of tools available for generating context awareness is machine learning. Machine learning is, in fact, a collection of many different algorithms and techniques for developing “computer systems that automatically improve their performance through experience” [1]. This thesis examines systematically the ability of existing algorithms from machine learning to endow computing systems with context awareness. Specifically, we apply machine learning techniques to tackle three different tasks related to context awareness and having applications in the field of navigation: (1) to recognize the activity of a smartphone user in an indoor office environment, (2) to recognize the mode of motion that a smartphone user is undergoing outdoors, and (3) to determine the optimal path of a ship traveling through ice-covered waters. The diversity of these tasks was chosen intentionally to demonstrate the breadth of problems encompassed by the topic of context awareness. During the course of studying context awareness, we adopted two conceptual “frameworks,” which we find useful for the purpose of solidifying the abstract concepts of context and context awareness. The first such framework is based strongly on the writings of a rhetorician from Hellenistic Greece, Hermagoras of Temnos, who defined seven elements of “circumstance”. We adopt these seven elements to describe contextual information. The second framework, which we dub the “context pyramid” describes the processing of raw sensor data into contextual information in terms of six different levels. At the top of the pyramid is “rich context”, where the information is expressed in prose, and the goal for the computer is to mimic the way that a human would describe a situation. We are still a long way off from computers being able to match a human’s ability to understand and describe context, but this thesis improves the state-of-the-art in context awareness for navigation applications. For some particular tasks, machine learning has succeeded in outperforming humans, and in the future there are likely to be tasks in navigation where computers outperform humans. One example might be the route optimization task described above. This is an example of a task where many different types of information must be fused in non-obvious ways, and it may be that computer algorithms can find better routes through ice-covered waters than even well-trained human navigators. This thesis provides only preliminary evidence of this possibility, and future work is needed to further develop the techniques outlined here. The same can be said of the other two navigation-related tasks examined in this thesis

Applications of Internet of Things

This book introduces the Special Issue entitled “Applications of Internet of Things”, of ISPRS International Journal of Geo-Information. Topics covered in this issue include three main parts: (I) intelligent transportation systems (ITSs), (II) location-based services (LBSs), and (III) sensing techniques and applications. Three papers on ITSs are as follows: (1) “Vehicle positioning and speed estimation based on cellular network signals for urban roads,” by Lai and Kuo; (2) “A method for traffic congestion clustering judgment based on grey relational analysis,” by Zhang et al.; and (3) “Smartphone-based pedestrian’s avoidance behavior recognition towards opportunistic road anomaly detection,” by Ishikawa and Fujinami. Three papers on LBSs are as follows: (1) “A high-efficiency method of mobile positioning based on commercial vehicle operation data,” by Chen et al.; (2) “Efficient location privacy-preserving k-anonymity method based on the credible chain,” by Wang et al.; and (3) “Proximity-based asynchronous messaging platform for location-based Internet of things service,” by Gon Jo et al. Two papers on sensing techniques and applications are as follows: (1) “Detection of electronic anklet wearers’ groupings throughout telematics monitoring,” by Machado et al.; and (2) “Camera coverage estimation based on multistage grid subdivision,” by Wang et al