Design and Testing of an Agonist-Antagonist Position-Impedance Controlled Myoelectric Prosthesis

Intuitive prosthetic control is limited by the inability to easily convey intention and perceive physical requirements of the task. Rather than providing haptic feedback and allowing users to consciously control every component of manipulation, relegating some aspects of control to the device may simplify operation. This study focuses on the development and testing of a control scheme able to identify object stiffness and regulate impedance. The system includes an algorithm to detect the apparent stiffness of an object, a proportional nonlinear EMG control algorithm for interpreting a user’s desired grasp aperture, and an antagonistically acting impedance controller. Performance of a testbed prosthetic simulation used to controllably extrude pastes of different properties from a compliant tube was compared to that of the non-dominant human hand. The paste volume extrusion error and response time to perform the task were recorded for comparison. Statistical analysis using (GEE) and (TOST) suggests the prosthetic controller and human hand performed similarly along these metrics. Performance differences in the trials were more strongly correlated to tube type and repetition block. The results suggest that the developed controller allows users to perform a controlled squeezing task at a level comparable to the human hand with minimal training. It also suggests that a priori stiffness estimation acquired through quick palpations may be sufficient for effective control during simple manipulation. The lack of a learning curve suggests that the development of systems that automatically control aspects of mechanical interaction may offer users more advanced control capabilities with low cognitive load

Description of motor control using inverse models

Humans can perform complicated movements like writing or running without giving them much thought. The scientific understanding of principles guiding the generation of these movements is incomplete. How the nervous system ensures stability or compensates for injury and constraints – are among the unanswered questions today. Furthermore, only through movement can a human impose their will and interact with the world around them. Damage to a part of the motor control system can lower a person’s quality of life. Understanding how the central nervous system (CNS) forms control signals and executes them helps with the construction of devices and rehabilitation techniques. This allows the user, at least in part, to bypass the damaged area or replace its function, thereby improving their quality of life. CNS forms motor commands, for example a locomotor velocity or another movement task. These commands are thought to be processed through an internal model of the body to produce patterns of motor unit activity. An example of one such network in the spinal cord is a central pattern generator (CPG) that controls the rhythmic activation of synergistic muscle groups for overground locomotion. The descending drive from the brainstem and sensory feedback pathways initiate and modify the activity of the CPG. The interactions between its inputs and internal dynamics are still under debate in experimental and modelling studies. Even more complex neuromechanical mechanisms are responsible for some non-periodic voluntary movements. Most of the complexity stems from internalization of the body musculoskeletal (MS) system, which is comprised of hundreds of joints and muscles wrapping around each other in a sophisticated manner. Understanding their control signals requires a deep understanding of their dynamics and principles, both of which remain open problems. This dissertation is organized into three research chapters with a bottom-up investigation of motor control, plus an introduction and a discussion chapter. Each of the three research chapters are organized as stand-alone articles either published or in preparation for submission to peer-reviewed journals. Chapter two introduces a description of the MS kinematic variables of a human hand. In an effort to simulate human hand motor control, an algorithm was defined that approximated the moment arms and lengths of 33 musculotendon actuators spanning 18 degrees of freedom. The resulting model could be evaluated within 10 microseconds and required less than 100 KB of memory. The structure of the approximating functions embedded anatomical and functional features of the modelled muscles, providing a meaningful description of the system. The third chapter used the developments in musculotendon modelling to obtain muscle activity profiles controlling hand movements and postures. The agonist-antagonist coactivation mechanism was responsible for producing joint stability for most degrees of freedom, similar to experimental observations. Computed muscle excitations were used in an offline control of a myoelectric prosthesis for a single subject. To investigate the higher-order generation of control signals, the fourth chapter describes an analytical model of CPG. Its parameter space was investigated to produce forward locomotion when controlled with a desired speed. The model parameters were varied to produce asymmetric locomotion, and several control strategies were identified. Throughout the dissertation the balance between analytical, simulation, and phenomenological modelling for the description of simple and complex behavior is a recurrent theme of discussion

ANTHROPOMORPHIC ROBOTIC ANKLE-FOOT PROSTHESIS WITH ACTIVE DORSIFLEXION- PLANTARFLEXION AND INVERSION-EVERSION

The main goal of the research presented in this paper is the development of a powered ankle-foot prosthesis with anthropomorphic characteristics to facilitate turning, walking on irregular grounds, and reducing secondary injuries on bellow knee amputees. The research includes the study of the gait in unimpaired human subjects that includes the kinetics and kinematics of the ankle during different types of gait, in different gait speeds at different turning maneuvers. The development of a robotic ankle-foot prosthesis with two active degrees of freedom (DOF) controlled using admittance and impedance controllers is presented. Also, a novel testing apparatus for estimation of the ankle mechanical impedance in two DOF is presented. The testing apparatus allows the estimation of the time-varying impedance of the human ankle in stance phase during walking in arbitrary directions. The presented work gives insight on the turning mechanisms of the human ankle and how they can be mimicked by the prosthesis to improve the gait and agility of below-knee amputees

Surf Leg

The Surf Leg Prosthetic project team in conjunction with QL+ and Operation Surf designed a transtibial prosthetic to be used for surfing. The senior project team focused on the missions of QL+ and Operation Surf as they went through the design process during the 2018-2019 academic year. The problem solved was that a standard prosthetic for a transtibial amputee does not provide the flexibility in enough degrees of freedom for a user to squat and balance on a surfboard. The goal of this project was to create a device specifically designed to improve the user’s balance and control while surfing. The device was designed with the idea that it could be used by anyone in need of a lower leg prosthetic for surfing at the Operation Surf events, while focusing on a specific user, Kyle Kelly, for testing and dimensions. The lower leg prosthetic fits onto the user’s already existing socket. The prosthetic is waterproof and improves upon already existing options for amputees by increasing the user’s ankle mobility and angles of the foot for the purposes of surfing

Proceedings of the first workshop on Peripheral Machine Interfaces: going beyond traditional surface electromyography

One of the hottest topics in rehabilitation robotics is that of proper control of prosthetic devices. Despite decades of research, the state of the art is dramatically behind the expectations. To shed light on this issue, in June, 2013 the first international workshop on Present and future of non-invasive PNS-Machine Interfaces was convened, hosted by the International Conference on Rehabilitation Robotics. The keyword PNS-Machine Interface (PMI) has been selected to denote human-machine interfaces targeted at the limb-deficient, mainly upper-limb amputees, dealing with signals gathered from the peripheral nervous system (PNS) in a non-invasive way, that is, from the surface of the residuum. The workshop was intended to provide an overview of the state of the art and future perspectives of such interfaces; this paper represents is a collection of opinions expressed by each and every researcher/group involved in it

A Study on Active/Passive Pneumatic Actuators for Assistive Systems

The need for intelligent assistive devices is growing. Due to advances in medicine, people are living longer and able to recover from severe neurological incidents, resulting in an increased population with neuromuscular weakness. In workplaces such as assembly lines, there is a high possibility of work-related fatigue or injury, such as when workers squat down or lift their arms during their work tasks. Assistive devices could help remedy loss of strength on their extremities as well as keep the work environment safe and productive, allowing these growing segments of the population in need of the devices to live more self-sufficient, productive, and higher-quality lives.In the design of assistive systems, an important design goal is prolonged operational time, which requires the minimum usage of energy. Energy consumption can be reduced by modifying the mechanical characteristics of assistive systems according to the dynamic characteristics of the human body, which vary considerably between tasks. This dissertation investigates 1) the design of actuators with adjustable mechanical impedance, 2) control strategies to search for, and adjust to, a suitable mechanical impedance for assistance and 3) sensing technologies for classifying the tasks in which the human engages.The first part of this dissertation characterizes a pneumatic variable stiffness actuator named an Active/Passive Pneumatic Actuator (AP2A). The actuator consists of an air cylinder and an array of solenoid valves. These valves and the corresponding switching algorithms tune the chamber pressures and make the AP2A function as a mechanical spring with desired stiffness. The actuator has a low mechanical impedance compared to geared motors, which enables it to achieve efficient interaction. Control strategies of an assistive system with the AP2A are discussed in the second part. This control framework utilizes the characteristics of the AP2A to provide assistance when necessary and to operate transparently (i.e., neither to assist nor to disturb the users) otherwise. Energy consumed by the AP2A and the assisted system is minimized by solving an optimal control problem. Finally, an estimator is introduced to detect assistive timing for the assistive system with the AP2A. This estimator utilizes physiological signals such as surface electromyogram and prior knowledge of a muscular model, classifying if the user is under the specified condition to be assisted by the AP2A. It demonstrates that the user's effort can be saved, also reducing the number of procedures to collect training data for the estimator before using assistive systems. The performance of the actuator, the controller, and the estimator proposed in this dissertation are verified through experiments.From the above, this dissertation contributes to developing the AP2A that provides assistance and saves energy usage of assistive systems by working as a mechanical spring with stiffness optimized for achieving effective interaction under specific conditions. This actuator supports assistive devices that can be deployed in the real world, properly assisting the users when needed

Proceedings of the first workshop on Peripheral Machine Interfaces: going beyond traditional surface electromyography

abstract: One of the hottest topics in rehabilitation robotics is that of proper control of prosthetic devices. Despite decades of research, the state of the art is dramatically behind the expectations. To shed light on this issue, in June, 2013 the first international workshop on Present and future of non-invasive peripheral nervous system (PNS)–Machine Interfaces (MI; PMI) was convened, hosted by the International Conference on Rehabilitation Robotics. The keyword PMI has been selected to denote human–machine interfaces targeted at the limb-deficient, mainly upper-limb amputees, dealing with signals gathered from the PNS in a non-invasive way, that is, from the surface of the residuum. The workshop was intended to provide an overview of the state of the art and future perspectives of such interfaces; this paper represents is a collection of opinions expressed by each and every researcher/group involved in it

Survey of Visual and Force/Tactile Control of Robots for Physical Interaction in Spain

Sensors provide robotic systems with the information required to perceive the changes that happen in unstructured environments and modify their actions accordingly. The robotic controllers which process and analyze this sensory information are usually based on three types of sensors (visual, force/torque and tactile) which identify the most widespread robotic control strategies: visual servoing control, force control and tactile control. This paper presents a detailed review on the sensor architectures, algorithmic techniques and applications which have been developed by Spanish researchers in order to implement these mono-sensor and multi-sensor controllers which combine several sensors

Achieving human-like dexterity in robotic hands : inspiration from human hand biomechanics and neuromuscular control

The human hand's unique biomechanical structure and neuromuscular control combine to produce amazing dexterous capabilities in a way that is still not fully understood. The Anatomically Correct Testbed (ACT) hand is a robotic system that is designed as a physical simulation of the human hand, and can help us examine and potentially uncover the roles of biomechanics and neural control in achieving dexterity. In this dissertation, I utilize the ACT hand and other robotic systems to explore the underlying sources of human hand dexterity, with the goal of understanding the fundamental differences between robotic and human hands in terms of (i) mechanical joint/tendon structure and (ii) control strategies. To begin, I develop comprehensive mechanical models that describe the musculoskeletal and tendon mechanics of the fingers and thumb of the human hand. Then, I work to isolate the contributions of biomechanical structure and neuromuscular control toward human dexterity. I have developed and implemented control strategies for achieving fine object manipulation first with the robotic hand of a space humanoid, Robonaut 2, and then with the ACT hand. I examined the unique control challenges, including uncontrollable joints and the requirement of accurate internal models, that arise due to the human hand's complex musculotendon structure and the potential advantages offered by the human hand's design, such as passive joint coupling to facilitate grasp shape adaptation and force production capabilities that are ideally suited for common manipulation tasks. Finally, inspired by the neuromuscular control strategies of the human hand, I have developed a novel hierarchical control strategy for the ACT hand and experimentally demonstrated improved grasp stability and manipulation capabilities compared to conventional robotic control laws. Through an in-depth exploration of human hand biomechanics and neuromuscular control, theoretical control analysis of robotic and human hands, and experimental demonstration of fine object manipulation, this work uncovers crucial insights into the sources of human hand dexterity that have the potential to drive innovative design and control strategies and bring robotic and prosthetic hands closer to human levels of dexterity.Mechanical Engineerin