1,658 research outputs found

    A Hardware Security Solution against Scan-Based Attacks

    Get PDF
    Scan based Design for Test (DfT) schemes have been widely used to achieve high fault coverage for integrated circuits. The scan technique provides full access to the internal nodes of the device-under-test to control them or observe their response to input test vectors. While such comprehensive access is highly desirable for testing, it is not acceptable for secure chips as it is subject to exploitation by various attacks. In this work, new methods are presented to protect the security of critical information against scan-based attacks. In the proposed methods, access to the circuit containing secret information via the scan chain has been severely limited in order to reduce the risk of a security breach. To ensure the testability of the circuit, a built-in self-test which utilizes an LFSR as the test pattern generator (TPG) is proposed. The proposed schemes can be used as a countermeasure against side channel attacks with a low area overhead as compared to the existing solutions in literature

    Multi-Tenant Cloud FPGA: A Survey on Security

    Full text link
    With the exponentially increasing demand for performance and scalability in cloud applications and systems, data center architectures evolved to integrate heterogeneous computing fabrics that leverage CPUs, GPUs, and FPGAs. FPGAs differ from traditional processing platforms such as CPUs and GPUs in that they are reconfigurable at run-time, providing increased and customized performance, flexibility, and acceleration. FPGAs can perform large-scale search optimization, acceleration, and signal processing tasks compared with power, latency, and processing speed. Many public cloud provider giants, including Amazon, Huawei, Microsoft, Alibaba, etc., have already started integrating FPGA-based cloud acceleration services. While FPGAs in cloud applications enable customized acceleration with low power consumption, it also incurs new security challenges that still need to be reviewed. Allowing cloud users to reconfigure the hardware design after deployment could open the backdoors for malicious attackers, potentially putting the cloud platform at risk. Considering security risks, public cloud providers still don't offer multi-tenant FPGA services. This paper analyzes the security concerns of multi-tenant cloud FPGAs, gives a thorough description of the security problems associated with them, and discusses upcoming future challenges in this field of study

    A comprehensive approach to MPSoC security: achieving network-on-chip security : a hierarchical, multi-agent approach

    Get PDF
    Multiprocessor Systems-on-Chip (MPSoCs) are pervading our lives, acquiring ever increasing relevance in a large number of applications, including even safety-critical ones. MPSoCs, are becoming increasingly complex and heterogeneous; the Networks on Chip (NoC paradigm has been introduced to support scalable on-chip communication, and (in some cases) even with reconfigurability support. The increased complexity as well as the networking approach in turn make security aspects more critical. In this work we propose and implement a hierarchical multi-agent approach providing solutions to secure NoC based MPSoCs at different levels of design. We develop a flexible, scalable and modular structure that integrates protection of different elements in the MPSoC (e.g. memory, processors) from different attack scenarios. Rather than focusing on protection strategies specifically devised for an individual attack or a particular core, this work aims at providing a comprehensive, system-level protection strategy: this constitutes its main methodological contribution. We prove feasibility of the concepts via prototype realization in FPGA technology

    Using embedded hardware monitor cores in critical computer systems

    Get PDF
    The integration of FPGA devices in many different architectures and services makes monitoring and real time detection of errors an important concern in FPGA system design. A monitor is a tool, or a set of tools, that facilitate analytic measurements in observing a given system. The goal of these observations is usually the performance analysis and optimisation, or the surveillance of the system. However, System-on-Chip (SoC) based designs leave few points to attach external tools such as logic analysers. Thus, an embedded error detection core that allows observation of critical system nodes (such as processor cores and buses) should enforce the operation of the FPGA-based system, in order to prevent system failures. The core should not interfere with system performance and must ensure timely detection of errors. This thesis is an investigation onto how a robust hardware-monitoring module can be efficiently integrated in a target PCI board (with FPGA-based application processing features) which is part of a critical computing system. [Continues.

    The AXIOM software layers

    Get PDF
    AXIOM project aims at developing a heterogeneous computing board (SMP-FPGA).The Software Layers developed at the AXIOM project are explained.OmpSs provides an easy way to execute heterogeneous codes in multiple cores. People and objects will soon share the same digital network for information exchange in a world named as the age of the cyber-physical systems. The general expectation is that people and systems will interact in real-time. This poses pressure onto systems design to support increasing demands on computational power, while keeping a low power envelop. Additionally, modular scaling and easy programmability are also important to ensure these systems to become widespread. The whole set of expectations impose scientific and technological challenges that need to be properly addressed.The AXIOM project (Agile, eXtensible, fast I/O Module) will research new hardware/software architectures for cyber-physical systems to meet such expectations. The technical approach aims at solving fundamental problems to enable easy programmability of heterogeneous multi-core multi-board systems. AXIOM proposes the use of the task-based OmpSs programming model, leveraging low-level communication interfaces provided by the hardware. Modular scalability will be possible thanks to a fast interconnect embedded into each module. To this aim, an innovative ARM and FPGA-based board will be designed, with enhanced capabilities for interfacing with the physical world. Its effectiveness will be demonstrated with key scenarios such as Smart Video-Surveillance and Smart Living/Home (domotics).Peer ReviewedPostprint (author's final draft

    High-level services for networks-on-chip

    Get PDF
    Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed

    System-on-chip architecture for secure sub-microsecond synchronization systems

    Get PDF
    213 p.En esta tesis, se pretende abordar los problemas que conlleva la protección cibernética del Precision Time Protocol (PTP). Éste es uno de los protocolos de comunicación más sensibles de entre los considerados por los organismos de estandarización para su aplicación en las futuras Smart Grids o redes eléctricas inteligentes. PTP tiene como misión distribuir una referencia de tiempo desde un dispositivo maestro al resto de dispositivos esclavos, situados dentro de una misma red, de forma muy precisa. El protocolo es altamente vulnerable, ya que introduciendo tan sólo un error de tiempo de un microsegundo, pueden causarse graves problemas en las funciones de protección del equipamiento eléctrico, o incluso detener su funcionamiento. Para ello, se propone una nueva arquitectura System-on-Chip basada en dispositivos reconfigurables, con el objetivo de integrar el protocolo PTP y el conocido estándar de seguridad MACsec para redes Ethernet. La flexibilidad que los modernos dispositivos reconfigurables proporcionan, ha sido aprovechada para el diseño de una arquitectura en la que coexisten procesamiento hardware y software. Los resultados experimentales avalan la viabilidad de utilizar MACsec para proteger la sincronización en entornos industriales, sin degradar la precisión del protocolo

    Secure Network-on-Chip Against Black Hole and Tampering Attacks

    Get PDF
    The Network-on-Chip (NoC) has become the communication heart of Multiprocessors-System-on-Chip (MPSoC). Therefore, it has been subject to a plethora of security threats to degrade the system performance or steal sensitive information. Due to the globalization of the modern semiconductor industry, many different parties take part in the hardware design of the system. As a result, the NoC could be infected with a malicious circuit, known as a Hardware Trojan (HT), to leave a back door for security breach purposes. HTs are smartly designed to be too small to be uncovered by offline circuit-level testing, so the system requires an online monitoring to detect and prevent the HT in runtime. This dissertation focuses on HTs inside the router of a NoC designed by a third party. It explores two HT-based threat models for the MPSoC, where the NoC experiences packet-loss and packet-tampering once the HT in the infected router is activated and is in the attacking state. Extensive experiments for each proposed architecture were conducted using a cycle-accurate simulator to demonstrate its effectiveness on the performance of the NoC-based system. The first threat model is the Black Hole Router (BHR) attack, where it silently discards the packets that are passing through without further announcement. The effect of the BHR is presented and analyzed to show the potency of the attack on a NoC-based system. A countermeasure protocol is proposed to detect the BHR at runtime and counteract the deliberate packet-dropping attack with a 26.9% area overhead, an average 21.31% performance overhead and a 22% energy consumption overhead. The protocol is extended to provide an efficient and power-gated scheme to enhance the NoC throughput and reduce the energy consumption by using end-to-end (e2e) approach. The power-gated e2e technique locates the BHR and avoids it with a 1% performance overhead and a 2% energy consumption overhead. The second threat model is a packet-integrity attack, where the HT tampers with the packet to apply a denial-of-service attack, steal sensitive information, gain unauthorized access, or misroute the packet to an unintended node. An authentic and secure NoC platform is proposed to detect and countermeasure the packet-tampering attack to maintain data-integrity and authenticity while keeping its secrecy with a 24.21% area overhead. The proposed NoC architecture is not only able to detect the attack, but also locates the infected router and isolates it from the network

    Optimising Security, Power Consumption and Performance of Embedded Systems

    Get PDF
    Increased interest in multicore systems has led to significant advancements in computing power, but it has also introduced new security risks due to covert channel communication. These covert channels enable the unauthorized leakage of sensitive information, posing a grave threat to system security. Traditional examples of covert channel attacks involve exploiting subtle variations such as temperature changes and timing differences to clandestinely transmit data through thermal and timing channels, respectively. These methods are particularly alarming because they demand minimal resources for implementation, thus presenting a formidable challenge to system security. Therefore, understanding the different classes of covert channel attacks and their characteristics is imperative for devising effective countermeasures. This thesis proposes two novel countermeasures to mitigate Thermal Covert Channel (TCC) attacks, which are among the most prevalent threats. In the first approach, we introduce the Selective Noise-Based Countermeasure. This novel technique disrupts covert communication by strategically adding a selective noise (extra thread) to the temperature signal to generate more heat and change its pattern. This intervention significantly increases the Bit Error Rate (BER) to 94%, thereby impeding data transmission effectively. Building upon this, the second strategy, termed Fan Speed Control Countermeasure, dynamically adjusts fan speed to reduce system temperature further, consequently decreasing the thermal signal frequency and shutting down any meaningful transmission. This methodology achieves a high BER (98%), thereby enhancing system security. Furthermore, the thesis introduces a new threat scenario termed Multi-Covert Channel Attacks, which demands advanced detection and mitigation techniques. To confront this emerging threat, we propose a comprehensive two-step approach that emphasizes both detection and tailored countermeasures. This approach leverages two distinct methodologies for implementation, with the primary goal of achieving optimal performance characterized by high BER and low power consumption. In the first method, referred to as the double multi-covert channel, we employ two distinct frequency ranges for the timing and thermal covert channels. Through extensive experimentation, we demonstrate that this approach yields a high BER, providing a formidable challenge to various defense strategies. However, it is noteworthy that this method may potentially lead to overheating issues due to the increased operational load. Alternatively, our second method, the single multi-covert channel, employs a single frequency range for data transmission. Notably, this approach addresses the overheating concerns associated with the double multi-covert channel, thereby reducing power consumption and minimizing the risk of system overheating. The experimental results presented in this thesis demonstrate the efficacy of the proposed strategies. By adopting a two-different approach, we not only enhance detection capabilities but also mitigate potential risks such as overheating. Our findings contribute significantly to the ongoing discourse on covert channel attacks and offer valuable insights for developing robust defense mechanisms against evolving threats. By providing insights into both traditional and emerging covert channel threats in multicore systems, this thesis significantly contributes to the field of multi-embedded system security. The proposed countermeasures demonstrate tangible security improvements, while the exploration of multi-covert channel attacks sets the stage for detection and defense strategies

    Real-time trace decoding and monitoring for safety and security in embedded systems

    Get PDF
    Integrated circuits and systems can be found almost everywhere in today’s world. As their use increases, they need to be made safer and more perfor mant to meet current demands in processing power. FPGA integrated SoCs can provide the ideal trade-off between performance, adaptability, and energy usage. One of today’s vital challenges lies in updating existing fault tolerance techniques for these new systems while utilizing all available processing capa bilities, such as multi-core and heterogeneous processing units. Control-flow monitoring is one of the primary mechanisms described for error detection at the software architectural level for the highest grade of hazard level clas sifications (e.g., ASIL D) described in industry safety standards ISO-26262. Control-flow errors are also known to compose the majority of detected errors for ICs and embedded systems in safety-critical and risk-susceptible environ ments [5]. Software-based monitoring methods remain the most popular [6–8]. However, recent studies show that the overheads they impose make actual reliability gains negligible [9, 10]. This work proposes and demonstrates a new control flow checking method implemented in FPGA for multi-core embedded systems called control-flow trace checker (CFTC). CFTC uses existing trace and debug subsystems of modern processors to rebuild their execution states. It can iden tify any errors in real-time by comparing executed states to a set of permitted state transitions determined statically. This novel implementation weighs hardware resource trade-offs to target mul tiple independent tasks in multi-core embedded applications, as well as single core systems. The proposed system is entirely implemented in hardware and isolated from all monitored software components, requiring 2.4% of the target FPGA platform resources to protect an execution unit in its entirety. There fore, it avoids undesired overheads and maintains deterministic error detection latencies, which guarantees reliability improvements without impairing the target software system. Finally, CFTC is evaluated under different software i Resumo fault-injection scenarios, achieving detection rates of 100% of all control-flow errors to wrong destinations and 98% of all injected faults to program binaries. All detection times are further analyzed and precisely described by a model based on the monitor’s resources and speed and the software application’s control-flow structure and binary characteristics.Circuitos integrados estão presentes em quase todos sistemas complexos do mundo moderno. Conforme sua frequência de uso aumenta, eles precisam se tornar mais seguros e performantes para conseguir atender as novas demandas em potência de processamento. Sistemas em Chip integrados com FPGAs conseguem prover o balanço perfeito entre desempenho, adaptabilidade, e uso de energia. Um dos maiores desafios agora é a necessidade de atualizar técnicas de tolerância à falhas para estes novos sistemas, aproveitando os novos avanços em capacidade de processamento. Monitoramento de fluxo de controle é um dos principais mecanismos para a detecção de erros em nível de software para sistemas classificados como de alto risco (e.g. ASIL D), descrito em padrões de segurança como o ISO-26262. Estes erros são conhecidos por compor a maioria dos erros detectados em sistemas integrados [5]. Embora métodos de monitoramento baseados em software continuem sendo os mais populares [6–8], estudos recentes mostram que seus custos adicionais, em termos de performance e área, diminuem consideravelmente seus ganhos reais em confiabilidade [9, 10]. Propomos aqui um novo método de monitora mento de fluxo de controle implementado em FPGA para sistemas embarcados multi-core. Este método usa subsistemas de trace e execução de código para reconstruir o estado atual do processador, identificando erros através de com parações entre diferentes estados de execução da CPU. Propomos uma implementação que considera trade-offs no uso de recuros de sistema para monitorar múltiplas tarefas independetes. Nossa abordagem suporta o monitoramento de sistemas simples e também de sistemas multi-core multitarefa. Por fim, nossa técnica é totalmente implementada em hardware, evitando o uso de unidades de processamento de software que possa adicionar custos indesejáveis à aplicação em perda de confiabilidade. Propomos, assim, um mecanismo de verificação de fluxo de controle, escalável e extensível, para proteção de sistemas embarcados críticos e multi-core
    corecore