Pressure Wave in Liquid Generated by Pneumatic Pistons and Its Interaction with a Free Surface

Numerical analysis of a pressure wave generated in a liquid [Formula: see text] upon impact of the pneumatic pistons and its interaction with a free surface has been performed for the geometry and parameters of the plasma compression system prototype constructed by General Fusion Inc. Stress wave developing in the hammer–anvil piston assembly is first simulated using high-fidelity structural mechanics research code, then propagated through the liquid [Formula: see text] with several solvers within OpenFOAM[Formula: see text] software and also with nonlinear acoustics in-house code based on the Westervelt equation. In the current system, a pressure wave transmitted into the liquid [Formula: see text] is characterized by a complex temporal double peak structure and strong spatial amplitude variation. An imprint of discrete pulses remains detectable during the entire propagation of the combined wave. An excellent agreement between the results produced with different numerical codes is obtained. Nonlinear effects associated with equation of state are found to be significant at impact velocities of [Formula: see text], while at lower velocities of [Formula: see text] the difference between the results obtained with linear and nonlinear equations of state is negligible. Liquid–gas interface dynamics during the compression process of a spherical gas cavity is captured very well by the compressibleInterFoam within OpenFOAM. </jats:p

A PC parallel port button box provides millisecond response time accuracy under Linux

For psychologists, it is sometimes necessary to measure people's reaction times to the nearest millisecond. This article describes how to use the PC parallel port to receive signals from a button box to achieve millisecond response time accuracy. The workings of the parallel port, the corresponding port addresses, and a simple Linux program for controlling the port are described. A test of the speed and reliability of button box signal detection is reported. If the reader is moderately familiar with Linux, this article should provide sufficient instruction for him or her to build and test his or her own parallel port button box. This article also describes how the parallel port could be used to control an external apparatus

The UTMOST Survey for Magnetars, Intermittent pulsars, RRATs and FRBs I: System description and overview

We describe the ongoing `Survey for Magnetars, Intermittent pulsars, Rotating radio transients and Fast radio bursts' (SMIRF), performed using the newly refurbished UTMOST telescope. SMIRF repeatedly sweeps the southern Galactic plane performing real-time periodicity and single-pulse searches, and is the first survey of its kind carried out with an interferometer. SMIRF is facilitated by a robotic scheduler which is capable of fully autonomous commensal operations. We report on the SMIRF observational parameters, the data analysis methods, the survey's sensitivities to pulsars, techniques to mitigate radio frequency interference and present some early survey results. UTMOST's wide field of view permits a full sweep of the Galactic plane to be performed every fortnight, two orders of magnitude faster than previous surveys. In the six months of operations from January to June 2018, we have performed $\sim 10$ sweeps of the Galactic plane with SMIRF. Notable blind re-detections include the magnetar PSR J1622$-$4950, the RRAT PSR J0941$-$3942 and the eclipsing pulsar PSR J1748$-$2446A. We also report the discovery of a new pulsar, PSR J1705$-$54. Our follow-up of this pulsar with the UTMOST and Parkes telescopes at an average flux limit of $\leq 20$ mJy and $\leq 0.16$ mJy respectively, categorizes this as an intermittent pulsar with a high nulling fraction of $< 0.002$Comment: Submitted to MNRAS, comments welcom

The Unseen Face of E-Business Project Development

The purpose of this paper is intent on identify and analyze the unseen factors of successful or failure of e-business project development. The IT managers must take into account both all costs involved in e-business development and all phases (analysis, design, testing, implementation, maintenance and operation) according to principle of project management for software/systems life cycle development. There are many solutions to exceed these factors of failure among could be counted outsourcing, a good project management, involvement of senior management, a real cost estimation etc.Zadanie pt. „Digitalizacja i udostępnienie w Cyfrowym Repozytorium Uniwersytetu Łódzkiego kolekcji czasopism naukowych wydawanych przez Uniwersytet Łódzki” nr 885/P-DUN/2014 zostało dofinansowane ze środków MNiSW w ramach działalności upowszechniającej nauk

An Optical Backplane Demonstrator System Based on FET-SEED Smart Pixel Arrays and Diffractive Lenslet Arrays

We have demonstrated a representative portion of an optical backplane using FET-SEED smart pixels and free-space optics to interconnect printed circuit boards (PCB\u27s) in a two board, unidirectional link configuration. 4×4 arrays of FET-SEED transceivers were designed, fabricated, and packaged all the PCB level, The optical interconnection was constructed using diffractive microoptics, and custom optomechanics. The system was operated in two modes, one showing high data throughput, 100 MBit/sec, and the other demonstrating large connection densities, 2222 channel/cm2

Basic concepts for convection parameterization in weather forecast and climate models: COST Action ES0905 final report

The research network “Basic Concepts for Convection Parameterization in Weather Forecast and Climate Models” was organized with European funding (COST Action ES0905) for the period of 2010–2014. Its extensive brainstorming suggests how the subgrid-scale parameterization problem in atmospheric modeling, especially for convection, can be examined and developed from the point of view of a robust theoretical basis. Our main cautions are current emphasis on massive observational data analyses and process studies. The closure and the entrainment–detrainment problems are identified as the two highest priorities for convection parameterization under the mass–flux formulation. The need for a drastic change of the current European research culture as concerns policies and funding in order not to further deplete the visions of the European researchers focusing on those basic issues is emphasized

Experiment to Characterize Aircraft Volatile Aerosol and Trace-Species Emissions (EXCAVATE)

The Experiment to Characterize Aircraft Volatile and Trace Species Emissions (EXCAVATE) was conducted at Langley Research Center (LaRC) in January 2002 and focused upon assaying the production of aerosols and aerosol precursors by a modern commercial aircraft, the Langley B757, during ground-based operation. Remaining uncertainty in the postcombustion fate of jet fuel sulfur contaminants, the need for data to test new theories of particle formation and growth within engine exhaust plumes, and the need for observations to develop air quality models for predicting pollution levels in airport terminal areas were the primary factors motivating the experiment. NASA's Atmospheric Effects of Aviation Project (AEAP) and the Ultra Effect Engine Technology (UEET) Program sponsored the experiment which had the specific objectives of determining ion densities; the fraction of fuel S converted from S(IV) to S(VI); the concentration and speciation of volatile aerosols and black carbon; and gas-phase concentrations of long-chain hydrocarbon and PAH species, all as functions of engine power, fuel composition, and plume age