439 research outputs found

    BPM Tools for Asset Management in Renewable Energy Power Plants

    Get PDF
    Business Process Management (BPM) is an accepted discipline and its importance in increasing automation inside industrial environment is today recognized by all players. The complexity of modern management process will lead to chaos without a well-designed and effective BPM. Several BPM Suites were compared and BPM approach was applied to the case study of process management in a renewable energy power plant. Results both in process reduction and simplification and flow optimization obtained in the real case are discussed to state efficacy and efficiency of the adopted approach

    Free-electron laser spectrum evaluation and automatic optimization

    Get PDF
    The radiation generated by a seeded free-electron laser (FEL) is characterized by a high temporal coherence, which is close to the Fourier limit in the ideal case. The setup and optimization of a FEL is a non-trivial and challenging operation. This is due to the plethora of highly sensitive machine parameters and to the complex correlations between them. The fine tuning of the FEL process is normally supervised by physicists and is carried out by scanning various parameters with the aim of optimizing the spectrum of the emitted pulses in terms of intensity and line-width. In this article we introduce a novel quantitative method for the evaluation of the FEL spectrum via a quality index. Moreover, we investigate the possibility of optimization of the FEL parameters using this index as the objective function of an automatic procedure. We also present the results of the preliminary tests performed in the FERMI FEL focused on the effectiveness and ability of the automatic procedure to assist in the task of machine tuning and optimization

    Ventilatory support and mechanical properties of the fibrotic lung acting as a "squishy ball"

    Get PDF
    Protective ventilation is the cornerstone of treatment of patients with the acute respiratory distress syndrome (ARDS); however, no studies have yet established the best ventilatory strategy to adopt when patients with acute exacerbation of interstitial lung disease (AE-ILD) are admitted to the intensive care unit. Due to the severe impairment of the respiratory mechanics, the fibrotic lung is at high risk of developing ventilator-induced lung injury, regardless of the lung fibrosis etiology. The purpose of this review is to analyze the effects of mechanical ventilation in AE-ILD and to increase the knowledge on the characteristics of fibrotic lung during artificial ventilation, introducing the concept of "squishy ball lung". The role of positive end-expiratory pressure is discussed, proposing a "lung resting strategy" as opposed to the "open lung approach". The review also discusses the practical management of AE-ILD patients discussing illustrative clinical cases

    Measurement of the CKM angle Îł from a combination of B±→Dh± analyses

    Get PDF
    A combination of three LHCb measurements of the CKM angle Îł is presented. The decays B±→D K± and B±→Dπ± are used, where D denotes an admixture of D0 and D0 mesons, decaying into K+K−, π+π−, K±π∓, K±π∓π±π∓, K0Sπ+π−, or K0S K+K− ïŹnal states. All measurements use a dataset corresponding to 1.0 fb−1 of integrated luminosity. Combining results from B±→D K± decays alone a best-ïŹt value of Îł =72.0◩ is found, and conïŹdence intervals are set Îł ∈ [56.4,86.7]◩ at 68% CL, Îł ∈ [42.6,99.6]◩ at 95% CL. The best-ïŹt value of Îł found from a combination of results from B±→Dπ± decays alone, is Îł =18.9◩, and the conïŹdence intervals Îł ∈ [7.4,99.2]◩ âˆȘ [167.9,176.4]◩ at 68% CL are set, without constraint at 95% CL. The combination of results from B± → D K± and B± → Dπ± decays gives a best-ïŹt value of Îł =72.6◩ and the conïŹdence intervals Îł ∈ [55.4,82.3]◩ at 68% CL, Îł ∈ [40.2,92.7]◩ at 95% CL are set. All values are expressed modulo 180◩, and are obtained taking into account the effect of D0–D0 mixing

    Characteristics and patterns of care of endometrial cancer before and during COVID-19 pandemic

    Get PDF
    Objective: Coronavirus disease 2019 (COVID-19) outbreak has correlated with the disruption of screening activities and diagnostic assessments. Endometrial cancer (EC) is one of the most common gynecological malignancies and it is often detected at an early stage, because it frequently produces symptoms. Here, we aim to investigate the impact of COVID-19 outbreak on patterns of presentation and treatment of EC patients. Methods: This is a retrospective study involving 54 centers in Italy. We evaluated patterns of presentation and treatment of EC patients before (period 1: March 1, 2019 to February 29, 2020) and during (period 2: April 1, 2020 to March 31, 2021) the COVID-19 outbreak. Results: Medical records of 5,164 EC patients have been retrieved: 2,718 and 2,446 women treated in period 1 and period 2, respectively. Surgery was the mainstay of treatment in both periods (p=0.356). Nodal assessment was omitted in 689 (27.3%) and 484 (21.2%) patients treated in period 1 and 2, respectively (p<0.001). While, the prevalence of patients undergoing sentinel node mapping (with or without backup lymphadenectomy) has increased during the COVID-19 pandemic (46.7% in period 1 vs. 52.8% in period 2; p<0.001). Overall, 1,280 (50.4%) and 1,021 (44.7%) patients had no adjuvant therapy in period 1 and 2, respectively (p<0.001). Adjuvant therapy use has increased during COVID-19 pandemic (p<0.001). Conclusion: Our data suggest that the COVID-19 pandemic had a significant impact on the characteristics and patterns of care of EC patients. These findings highlight the need to implement healthcare services during the pandemic

    Les droits disciplinaires des fonctions publiques : « unification », « harmonisation » ou « distanciation ». A propos de la loi du 26 avril 2016 relative à la déontologie et aux droits et obligations des fonctionnaires

    Get PDF
    The production of tt‟ , W+bb‟ and W+cc‟ is studied in the forward region of proton–proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98±0.02 fb−1 . The W bosons are reconstructed in the decays W→ℓΜ , where ℓ denotes muon or electron, while the b and c quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions.The production of tt‟t\overline{t}, W+bb‟W+b\overline{b} and W+cc‟W+c\overline{c} is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 ±\pm 0.02 \mbox{fb}^{-1}. The WW bosons are reconstructed in the decays W→ℓΜW\rightarrow\ell\nu, where ℓ\ell denotes muon or electron, while the bb and cc quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions

    Micromechanical Properties of Injection-Molded Starch–Wood Particle Composites

    Get PDF
    The micromechanical properties of injection molded starch–wood particle composites were investigated as a function of particle content and humidity conditions. The composite materials were characterized by scanning electron microscopy and X-ray diffraction methods. The microhardness of the composites was shown to increase notably with the concentration of the wood particles. In addition,creep behavior under the indenter and temperature dependence were evaluated in terms of the independent contribution of the starch matrix and the wood microparticles to the hardness value. The influence of drying time on the density and weight uptake of the injection-molded composites was highlighted. The results revealed the role of the mechanism of water evaporation, showing that the dependence of water uptake and temperature was greater for the starch–wood composites than for the pure starch sample. Experiments performed during the drying process at 70°C indicated that the wood in the starch composites did not prevent water loss from the samples.Peer reviewe

    Mapping genomic loci implicates genes and synaptic biology in schizophrenia

    Get PDF
    Schizophrenia has a heritability of 60-80%1, much of which is attributable to common risk alleles. Here, in a two-stage genome-wide association study of up to 76,755 individuals with schizophrenia and 243,649 control individuals, we report common variant associations at 287 distinct genomic loci. Associations were concentrated in genes that are expressed in excitatory and inhibitory neurons of the central nervous system, but not in other tissues or cell types. Using fine-mapping and functional genomic data, we identify 120 genes (106 protein-coding) that are likely to underpin associations at some of these loci, including 16 genes with credible causal non-synonymous or untranslated region variation. We also implicate fundamental processes related to neuronal function, including synaptic organization, differentiation and transmission. Fine-mapped candidates were enriched for genes associated with rare disruptive coding variants in people with schizophrenia, including the glutamate receptor subunit GRIN2A and transcription factor SP4, and were also enriched for genes implicated by such variants in neurodevelopmental disorders. We identify biological processes relevant to schizophrenia pathophysiology; show convergence of common and rare variant associations in schizophrenia and neurodevelopmental disorders; and provide a resource of prioritized genes and variants to advance mechanistic studies
    • 

    corecore