SPIRAL 2 injector diagnostics

International audienceThe future SPIRAL2 facility will be composed of a multi-beam driver accelerator (5 mA/40 MeV deuterons, 5 mA /14.5 MeV/u heavy ions) and a dedicated building for the production of radioactive ion beams (RIBs). RIBs will be accelerated by the existing cyclotron CIME for the post acceleration and sent to GANIL's experimental areas. The injector constituted by an ion source a deuteron/proton source a L.E.B.T. and a M.E.B.T. lines and a room temperature R.F.Q. will produces, transports and accelerates beams up to an energy of 0.75 MeV/u. An Intermediate Test Bench (B.T.I.) is being built to commission the SPIRAL2 injector through the first rebuncher of the M.E.B.T. line in a first step and the last rebuncher in a second step. The B.T.I. is designed to perform a wide variety of measurements and functions and to go more deeply in the understanding of the behaviour of diagnostics under high average intensity beam operations. A superconducting LINAC equipped with two types of cavity will allow reaching 20 MeV/u for deuterons beam. This paper describes injector diagnostic developments and gives information about the current status

Preliminary implementation for the new SPIRAL2 project control system

International audienceThe Spiral2 project consists of a new facility to provide high intensity rare ions beams. It is based on a primary beam driver accelerator (RFQ followed by a superconducting linac) and a rare ion production process delivering the beam either to a low energy experimental area or to the existing Ganil facility. From October this year, one ion source coupled with a first beam line section will be in test; then, the injector (ion and deuteron sources, RFQ) will be tested by the end of 2010 so the whole accelerator should be commissioned by the end of 2011; the first exotic beams being planned one year later. The accelerator control system design results from the collaboration between several institutes and Epics has been chosen as the basic framework. The paper therefore presents the main choices: MVME5500 CPUs, VME I/O boards, VxWorks, Siemens PLCs, Modbus field buses, EDM screens and Java applications, Linux PCs, use of a LabView/Epics gateway... Specific topics are the evaluation of the XAL environment, an Epics design to address the power supplies, an emittance measurement system, the development of a beam profiler interface and the investigation for a triggered acquisition system

First step towards the new SPIRAL2 project control system

International audienceThe Spiral2 project at Ganil aims to produce rare ion beams using a Uranium carbide target fission process. The accelerator consists of a RFQ followed by a superconducting cavity linac and is designed to provide high intensity primary beams (deuterons, protons or heavy ions). The accelerator should be commissioned by the end of 2011; then, the first tests aiming to produce exotic beams are planned one year later. The control system will result of the collaboration between several institutes among which the Saclay Dapnia division yet having a good experience and knowledge with Epics. So and also because of its widely used functionalities, Epics has been chosen as the basic framework for the accelerator control and people from the other laboratories belonging to the collaboration are progressively acquiring a first experience with Epics. The paper first explains the organisation of the collaboration then it describes the basic hardware and software choices for the project. Some preliminary implementations are therefore given. As the project is still in its beginning phase, the paper ends by listing some interrogations not yet solved for the control system definition and opened for discussion

The SPIRAL2 control system progress towards the commissioning phase

MOCOAAB03, http://accelconf.web.cern.ch/AccelConf/ICALEPCS2013/papers/mocoaab03.pdfInternational audienceThe commissioning of the first phase of the Spiral2 Radioactive Ion Beams facility at Ganil will soon start, so requiring the control system components to be delivered in time. Yet, parts of the system were validated during preliminary tests performed with ions and deuterons beams at low energy. The control system development results from the collaboration between Ganil, CEA-IRFU, CNRS-IPHC laboratories, using appropriate tools and approach. Based on Epics, the control system follows a classical architecture. At the lowest level, Modbus/TCP protocol is considered as a field bus. Then, equipment are handled by IOCs (soft or VME/VxWorks) with a software standardized interface between IOCs and clients applications on top. This last upper layer consists of Epics standard tools, CSS/BOY user interfaces within the socalled CSSop Spiral2 context suited for operation and, for machine tunings, high level applications implemented by Java programs developed within a Spiral2 framework derived from the open-Xal one. Databases are used for equipment data and alarms archiving, to configure equipment and to manage the machine lattice and beam settings. A global overview of the system is therefore here proposed

MESOTHELIUM PERICARDIQUE PRIMITIF SIMULANT UN KYSTE HYDATIQUE PERICARDIQUE

The mesothelioma of pericardium is a rare tumor. Its clinical presentation is polymorphous and its diagnosis is especially histological. We report a case of 63 years old women who presented, one month before, dyspnea on exertion which evolved to orthopnea, associated to atypical thoracic pain, admitted in intensive care unit for symptoms of compressive effusion. Transthoracic echocardiography was favourable of hydatid cyst of pericardium. A thoracotomy, following cardio-circulatory arrest, showed cystic tumor of pericardium invading the left auricle, mediastinal pleura and the left pulmonary hilum. Histopathologic examination confirmed the diagnosis of mesothelioma of pericardium.Le mésothélium péricardique primitif malin est une tumeur rare. Sa présentation clinique est polymorphe et son diagnostic est surtout histologique. Nous rapportons le cas d’une patiente âgée de 63 ans ayant présenté, un mois auparavant, une dyspnée d’effort ayant évolué vers l’orthopnée et associée à des douleurs thoraciques atypiques, a été admise au service des urgences dans un tableau de pré-tamponnade. L’échocardiographie transthoracique était en faveur d’un kyste hydatique péricardique avec compression des cavités cardiaques droites. Suite à un arrêt cardio-circulatoire, une thoracotomie de sauvetage a montré une masse kystique péricardique envahissant l’oreillette gauche, la plèvre mediastinale et le hile pulmonaire gauches. L’examen anatomopathologique à l’autopsie a objectivé un mésothélium péricardique primitif malin

A Small but Efficient Collaboration for the Spiral2 Control System Development

http://accelconf.web.cern.ch/AccelConf/ICALEPCS2013/papers/tucobab01.pdfThe Spiral2 radioactive ion beam facility to be commissioned in 2014 at Ganil (Caen) is built within international collaborations. This also concerns the control system development shared by three laboratories: Ganil has to coordinate the control and automated systems work packages, CEA/IRFU is in charge of the "injector" (sources and low energy beam lines) and the LLRF, CNRS/IPHC provides the emittancemeters and a beam diagnostics platform. Besides the technology Epics based, this collaboration, although being handled with a few people, nevertheless requires an appropriate and tight organization to reach the objectives given by the project. This contribution describes how, started in 2006, the collaboration for controls has been managed both from the technological point of view and the organizational one, taking into account not only the previous experience, technical background or skill of each partner, but also their existing working practices and "cultural" approaches. A first feedback comes from successful beam tests carried out at Saclay and Grenoble; a next challenge is the migration to operation, Ganil having to run Spiral2 as the other members are moving to new projects

Abundance of Delta Resonances in 58Ni+58Ni Collisions between 1 and 2 AGeV

Charged pion spectra measured in 58Ni-58Ni collisions at 1.06, 1.45 and 1.93 AGeV are interpreted in terms of a thermal model including the decay of Delta resonances. The transverse momentum spectra of pions are well reproduced by adding the pions originating from the Delta-resonance decay to the component of thermal pions, deduced from the high transverse momentum part of the pion spectra. About 10 and 18% of the nucleons are excited to Delta states at freeze-out for beam energies of 1 and 2 AGeV, respectively.Comment: 14 pages, LaTeX with 3 included figures; submitted to Physics Letters

Stopping and Radial Flow in Central 58Ni + 58Ni Collisions between 1 and 2 AGeV

The production of charged pions, protons and deuterons has been studied in central collisions of 58Ni on 58Ni at incident beam energies of 1.06, 1.45 and 1.93 AGeV. The dependence of transverse-momentum and rapidity spectra on the beam energy and on the centrality of the collison is presented. It is shown that the scaling of the mean rapidity shift of protons established for AGS and SPS energies is valid down to 1 AGeV. The degree of nuclear stopping is discussed; the IQMD transport model reproduces the measured proton rapidity spectra for the most central events reasonably well, but does not show any sensitivity between the soft and the hard equation of state (EoS). A radial flow analysis, using the midrapidity transverse-momentum spectra, delivers freeze-out temperatures T and radial flow velocities beta_r which increase with beam energy up to 2 AGeV; in comparison to existing data of Au on Au over a large range of energies only beta_r shows a system size dependence

K^+ production in the reaction 58Ni+58Ni^{58}Ni+^{58}Ni at incident energies from 1 to 2 AGeV

Semi-inclusive triple differential multiplicity distributions of positively charged kaons have been measured over a wide range in rapidity and transverse mass for central collisions of $^{58}$Ni with $^{58}$Ni nuclei. The transverse mass ($m_t$) spectra have been studied as a function of rapidity at a beam energy 1.93 AGeV. The $m_t$ distributions of K^+ mesons are well described by a single Boltzmann-type function. The spectral slopes are similar to that of the protons indicating that rescattering plays a significant role in the propagation of the kaon. Multiplicity densities have been obtained as a function of rapidity by extrapolating the Boltzmann-type fits to the measured distributions over the remaining phase space. The total K^+ meson yield has been determined at beam energies of 1.06, 1.45, and 1.93 AGeV, and is presented in comparison to existing data. The low total yield indicates that the K^+ meson can not be explained within a hadro-chemical equilibrium scenario, therefore indicating that the yield does remain sensitive to effects related to its production processes such as the equation of state of nuclear matter and/or modifications to the K^+ dispersion relation.Comment: 24 pages Latex (elsart) 7 PS figures to be submitted to Nucl. Phys