264 research outputs found
Determination of optimal conditions for pressure oxidative leaching of Sarcheshmeh Molybdenite concentrate using Taguchi method
The present research work is based on finding the optimum conditions for pressure oxidative leaching of the molybdenite concentrate to produce technical-grade molybdic oxide (MoO3) with high recovery through further treatment of the filtrate solution. The Taguchi method was used to design and minimize the number of experiments. By using Taguchi orthogonal (L25) array, five parameters (time, temperature, oxygen pressure, pulp density and acid concentration) at five levels were selected for 25 experiments. The experiments were designed and carried out in a high-pressure reactor in the presence of nitric acid as solvent and oxidizing agent for the molybdenite concentrate and its ReS2 content. The optimum conditions for pressure leaching of molybdenite were obtained through using Signal to Noise analysis and modified by using Minitab software prediction tool. Furthermore, the optimum condition for an economical pressure leaching of rhenium sulfide (ReS2) was achieved with the same process. Analysis of variance (ANOVA) showed that the pulp density is of paramount importance in this process
Using PM2.5 concentrations to estimate the health burden from solid fuel combustion, with application to Irish and Scottish homes
Background: This study estimates the potential population health burden from exposure to combustion-derived particulate air pollution in domestic settings in Ireland and Scotland. Methods: The study focused on solid fuel combustion used for heating and the use of gas for cooking. PM2.5 (particulate matter with an aerodynamic diameter < 2.5 μm) was used as the pollutant mixture indicator. Measured PM2.5 concentrations in homes using solid fuels were adjusted for other sources of PM2.5 by subtracting PM2.5 concentrations in homes using gas for cooking but not solid fuel heating. Health burden was estimated for exposure indoors 6 pm - midnight, or all day (24-hour), by combining estimated attributable annual PM2.5 exposures with (i) selected epidemiological functions linking PM2.5 with mortality and morbidity (involving some re-scaling from PM10 to PM2.5, and adjustments ‘translating’ from concentrations to exposures) and (ii) on the current population exposed and background rates of morbidity and mortality. Results: PM2.5 concentrations in coal and wood burning homes were similar to homes using gas for cooking, used here as a baseline (mean 24-hr PM2.5 concentrations 8.6 μg/m3) and so health impacts were not calculated. Concentrations of PM2.5 in homes using peat were higher (24-hr mean 15.6 μg/m3); however, health impacts were calculated for the exposed population in Ireland only; the proportion exposed in Scotland was very small. The assessment for winter evening exposure (estimated annual average increase of 2.11 μg/m3 over baseline) estimated 21 additional annual cases of all-cause mortality, 55 of chronic bronchitis, and 30,100 and 38,000 annual lower respiratory symptom days (including cough) and restricted activity days respectively. Conclusion: New methods for estimating the potential health burden of combustion-generated pollution from solid fuels in Irish and Scottish homes are provided. The methodology involves several approximations and uncertainties but is consistent with a wider movement towards quantifying risks in PM2.5 irrespective of source. Results show an effect of indoor smoke from using peat (but not wood or coal) for heating and cooking; but they do not suggest that this is a major public health issue
Engaging with community researchers for exposure science: lessons learned from a pesticide biomonitoring study
A major challenge in biomonitoring studies with members of the general public is ensuring their continued involvement throughout the necessary length of the research. The paper presents evidence on the use of community researchers, recruited from local study areas, as a mechanism for ensuring effective recruitment and retention of farmer and resident participants for a pesticides biomonitoring study. The evidence presented suggests that community researchers' abilities to build and sustain trusting relationships with participants enhanced the rigour of the study as a result of their on-the-ground responsiveness and flexibility resulting in data collection beyond targets expected
Urinary biomarker concentrations of captan, chlormequat, chlorpyrifos and cypermethrin in UK adults and children living near agricultural land
There is limited information on the exposure to pesticides experienced by UK residents living near agricultural land. This study aimed to investigate their pesticide exposure in relation to spray events. Farmers treating crops with captan, chlormequat, chlorpyrifos or cypermethrin provided spray event information. Adults and children residing ≤100 m from sprayed fields provided first-morning void urine samples during and outwith the spray season. Selected samples (1–2 days after a spray event and at other times (background samples)) were analysed and creatinine adjusted. Generalised Linear Mixed Models were used to investigate if urinary biomarkers of these pesticides were elevated after spray events. The final data set for statistical analysis contained 1518 urine samples from 140 participants, consisting of 523 spray event and 995 background samples which were analysed for pesticide urinary biomarkers. For captan and cypermethrin, the proportion of values below the limit of detection was greater than 80%, with no difference between spray event and background samples. For chlormequat and chlorpyrifos, the geometric mean urinary biomarker concentrations following spray events were 15.4 μg/g creatinine and 2.5 μg/g creatinine, respectively, compared with 16.5 μg/g creatinine and 3.0 μg/g creatinine for background samples within the spraying season. Outwith the spraying season, concentrations for chlorpyrifos were the same as those within spraying season backgrounds, but for chlormequat, lower concentrations were observed outwith the spraying season (12.3 μg/g creatinine). Overall, we observed no evidence indicative of additional urinary pesticide biomarker excretion as a result of spray events, suggesting that sources other than local spraying are responsible for the relatively low urinary pesticide biomarkers detected in the study population
Potential health risk of endocrine disruptors in construction sector and plastics industry: a new paradigm in occupational health
Endocrine disruptors (EDs) belong to large and diverse groups of agents that may cause
multiple biological effects associated with, for example, hormone imbalance and infertility, chronic
diseases such as diabetes, genome damage and cancer. The health risks related with the exposure to
EDs are typically underestimated, less well characterized, and not regulated to the same extent as, for
example, carcinogens. The increased production and utilization of identified or suspected EDs in
many different technological processes raises new challenges with respect to occupational exposure
settings and associated health risks. Due to the specific profile of health risk, occupational exposure
to EDs demands a new paradigm in health risk assessment, redefinition of exposure assessment, new
effects biomarkers for occupational health surveillance and definition of limit values. The construction
and plastics industries are among the strongest economic sectors, employing millions of workers
globally. They also use large quantities of chemicals that are known or suspected EDs. Focusing on
these two industries, this short communication discusses: (a) why occupational exposure to EDs
needs a more specific approach to occupational health risk assessments, (b) identifies the current
knowledge gaps, and (c) identifies and gives a rationale for a future occupational health paradigm,
which will include ED biomarkers as a relevant parameter in occupational health risk assessment,
surveillance and exposure preventioninfo:eu-repo/semantics/publishedVersio
The Dopamine D 3 Receptor Gene and Posttraumatic Stress Disorder
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/108358/1/jts21937.pd
Evaluation of two-year recall of self-reported pesticide exposure among Ugandan smallholder farmers
OBJECTIVES: To evaluate smallholder farmers' recall of pesticide use and exposure determinants over a two-year period in a low-income country context. METHODS: The Pesticide Use in Tropical Settings (PESTROP) study in Uganda consists of 302 smallholder farmers who were interviewed in 2017. In the same season in 2019, these farmers were re-questioned concerning pesticide use (e.g., use of active ingredients) and exposure information (e.g., crops, personal protective equipment [PPE], hygienic behaviours) they had previously provided. The extent of recall bias was assessed by comparing responses at follow-up in 2019 with practices and behaviours reported from the baseline interview in 2017. RESULTS: An 84% (n = 255) follow-up response rate was attained. We found instances of better recall (e.g., overall agreement >70% and Area Under the Curve (AUC) values > 0.7) for the use of some active ingredients, commonly used PPE items, and washing clothes after application, whereas only 13.3% could correctly recall their three major crops. We observed a trend where more individuals reported the use of active ingredients, while fewer reported the use of PPE items, two years later. In general, we found better agreement in the recall of years working with pesticides compared to hours per day or days per week in the field, with no apparent systematic over or under reporting by demographic characteristics. CONCLUSIONS: While some of these findings provide consistency with those from high-income countries, more research is needed on recall in poorly educated agriculture communities in low- and middle-income settings to confirm these results
HBM4EU chromates study - the measurement of hexavalent and trivalent chromium in exhaled breath condensate samples from occupationally exposed workers across Europe
The aim of this study was to investigate the practicability of exhaled breath condensate (EBC) as a biological matrix to detect and measure hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) in workers occupationally exposed to Cr(VI). EBC samples were collected from workers in France, Finland, Italy, The Netherlands and the United Kingdom from three different target activities: chrome platers, stainless steel welders and surface treatment workers. Pre and post working week EBC samples were collected from 177 exposed workers and 98 unexposed workers (control group). Hyphenated chromatography systems with inductively coupled plasma - mass spectrometry (ICP-MS) were for the analysis. The results showed that the occupationally exposed workers had significantly higher levels of Cr(VI) and Cr(III) than the control group. Chrome platers exhibited the highest Cr(VI) levels in their EBC samples, with a significant increase from their pre to post samples for both Cr(VI) and Cr(III). A significant difference was also found between pre and post EBC samples for Cr(III) in welders. This study has shown that EBC has the potential to be a valid, non-invasive biological matrix to assess occupational exposure to Cr(VI) and Cr(III) for biological monitoring assessment, with the ability to detect low level inhalation exposures.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 733032 and received co-funding from the author’s organizations and/or Ministries.S
Safe(r)-by-design principles in the thermoplastics industry: guidance on release assessment during manufacture of nano-enabled products
Background: The application of nanomaterials (NMs) and nano-enabled products (NEPs) across many industries has been extensive and is still expanding decades after first being identified as an emerging technology. Additive manufacturing has been greatly impacted and has seen the benefits of integrating NMs within products. With the expansion of nanotechnology, there has been a need to develop more adaptive and responsive methods to ascertain risks and ensure technology is developed safely. The Safe(r)-by-Design (SbD) concept can be used to establish safe parameters and minimise risks during the materials’ lifecycle, including the early stages of the supply chain. Exposure monitoring has advanced in recent years with the creation of standardised protocols for occupational exposure assessment of nano-objects and their aggregates and agglomerates (NOAA).Methods: To aid in the development of an online SbD-supporting platform by the EU-funded project SAbyNA, we adopt a Europe Standard for monitoring release of NOAA to identify if a greater release of NOAA is associated with incorporation of NMs within NEPs compared to a polymer matrix alone. Case studies included filaments of polypropylene (PP) with nano-Ag or polycarbonate (PC) with single-walled carbon nanotubes (SWCNTs). NMs were received in masterbatch, and therefore previously modified to align with SbD interventions. Results were collected in line with European Standard recommendations: monitoring particle concentrations using direct reading instruments (DRI), sampling for offline chemical and morphological analysis, and collecting contextual information.Results and discussion: Based on the criteria described in the European standard (BS EN 17058), data from both case studies identified that inhalation exposure relating to NM was “unlikely”. Despite this, during the production of the SWCNT-PC filaments, some noteworthy observations were made, including several DRI activity measurements shown to be higher than background levels, and material morphologically similar to the reference SWCNT/polymeric masterbatch observed in offline analysis. The data collected during this campaign were used to discuss choices available for data interpretation and decision-making in the European Standard for monitoring release of NOAA and also to facilitate the development of SAbyNA’s user-friendly industry platform for the SbD of NMs and NEPs
- …