151 research outputs found
Time-dependent seismic hazard in mining.
A project report submitted to the Faculty of Mining Engineering,
University of the Witwatersrand, Johannesburg, in partial fulfilment of
the requirements for the degree of Master of Science in Engineering.A strategy to determine the probability that a mining induced seismic event will
occur with magnitude which exceeds some specified value within a given time is
investigated.
The model allows for a non-linear frequency-magnitude relationship and a
Poissonian distribution of seismic events in time. The procedure is also
independent of the method of mining and of the mining geometry.
The model was applied to clusters of various sizes) starting from small areas on a
single reef and ending up with the entire mine as a single entity.
It was shown that the model works well with large populations of events, but to be
successful with small clusters, the retention of the Poisson distribution is too
restrictive and a non-stationary model of seismicevent occurrence in time will have
to be developed.AC 201
Neuropathological changes associated with Clostridium perfringens type D epsilon toxin
Thesis ( M.Sc.) -- University of Adelaide, Dept. of Pathology, 198
Parents’ views of genetic testing and treatment of familial hypercholesterolemia in children : a qualitative study
Open Access via Springer Compact Agreement. We would like to thank all the participants who took part and the genetics/lipid services who helped with recruitment, particularly Hazel Hailey and Margaretha van Mourik. We also thank our project advisory team, patient representatives and Zoe Skea. KFK was supported by a Postdoctoral Fellowship from the Chief Scientist Office of the Scottish Government (PDF/10/06). The views of this paper are the authors own.Peer reviewedPublisher PD
Growth and dislocation studies of β-HMX
Background: The defect structure of organic materials is important as it plays a major role in their crystal growth
properties. It also can play a subcritical role in “hot-spot” detonation processes of energetics and one such
energetic is cyclotetramethylene-tetranitramine, in the commonly used beta form (β-HMX).
Results: The as-grown crystals grown by evaporation from acetone show prismatic, tabular and columnar habits, all
with {011}, {110}, (010) and (101) faces. Etching on (010) surfaces revealed three different types of etch pits, two of
which could be identified with either pure screw or pure edge dislocations, the third is shown to be an artifact of
the twinning process that this material undergoes. Examination of the {011} and {110} surfaces show only one type
of etch pit on each surface; however their natural asymmetry precludes the easy identification of their Burgers
vector or dislocation type. Etching of cleaved {011} surfaces demonstrates that the etch pits can be associated with
line dislocations. All dislocations appear randomly on the crystal surfaces and do not form alignments characteristic
of mechanical deformation by dislocation slip.
Conclusions: Crystals of β-HMX grown from acetone show good morphological agreement with that predicted by
modelling, with three distinct crystal habits observed depending upon the supersaturation of the growth solution.
Prismatic habit was favoured at low supersaturation, while tabular and columnar crystals were predominant at
higher super saturations. The twin plane in β-HMX was identified as a (101) reflection plane. The low plasticity of
β-HMX is shown by the lack of etch pit alignments corresponding to mechanically induced dislocation arrays.
On untwinned {010} faces, two types of dislocations exist, pure edge dislocations with b = [010] and pure screw
dislocations with b = [010]. On twinned (010) faces, a third dislocation type exists and it is proposed that these pits
are associated with pure screw dislocations with b = [010]
Does supplementation of oocytes with additional mtDNA influence developmental outcome?
Introducing extra mitochondrial DNA (mtDNA) into oocytes at fertilization can rescue poor quality oocytes. However, supplementation alters DNA methylation and gene expression profiles of preimplantation embryos. To determine if these alterations impacted offspring, we introduced mtDNA from failed-tomature sister (autologous) or third party (heterologous) oocytes into mature oocytes and transferred zygotes into surrogates. Founders exhibited significantly greater daily weight gain (heterologous) and growth rates (heterologous and autologous) to controls. In weaners, cholesterol, bilirubin (heterologous and autologous), anion gap, and lymphocyte count (autologous) were elevated. In mature pigs, potassium (heterologous) and bicarbonate (autologous) were altered. mtDNA and imprinted gene analyses did not reveal aberrant profiles. Neither group exhibited gross anatomical, morphological, or histopathological differences that would lead to clinically significant lesions. Female founders were fertile and their offspring exhibited modified weight and height gain, biochemical, and hematological profiles. mtDNA supplementation induced minor differences that did not affect health and well-being.Stephen McIlfatrick, Sean O, Leary, Takashi Okada, Alexander Penn, Vy Hoang Thao Nguyen, Lisa McKenny, Shang-Yu Huang, Eryk Andreas, John Finnie, Roy Kirkwood, and Justin C. St. Joh
Bioelectromagnetics research within an Australian context: the Australian centre for electromagnetic bioeffects research (ACEBR)
Mobile phone subscriptions continue to increase across the world, with the electromagnetic fields (EMF) emitted by these devices, as well as by related technologies such as Wi-Fi and smart meters, now ubiquitous. This increase in use and consequent exposure to mobile communication (MC)-related EMF has led to concern about possible health effects that could arise from this exposure. Although much research has been conducted since the introduction of these technologies, uncertainty about the impact on health remains. The Australian Centre for Electromagnetic Bioeffects Research (ACEBR) is a National Health and Medical Research Council Centre of Research Excellence that is undertaking research addressing the most important aspects of the MC-EMF health debate, with a strong focus on mechanisms, neurodegenerative diseases, cancer, and exposure dosimetry. This research takes as its starting point the current scientific status quo, but also addresses the adequacy of the evidence for the status quo. Risk communication research complements the above, and aims to ensure that whatever is found, it is communicated effectively and appropriately. This paper provides a summary of this ACEBR research (both completed and ongoing), and discusses the rationale for conducting it in light of the prevailing science.Sarah P. Loughran ... Jim Manavis ... Robert Vink ... et al
Mechanical properties of β-HMX
Background: For a full understanding of the mechanical properties of a material, it is essential to understand the defect structures and associated properties and microhardness indentation is a technique that can aid this understanding. Results: The Vickers hardness on (010), {011} and {110} faces lay in the range of 304-363 MPa. The Knoop Hardnesses on the same faces lay in the range 314-482 MPa. From etching of three indented surfaces, the preferred slip planes have been identified as (001) and (101). For a dislocation glide, the most likely configuration for dislocation movement on the (001) planes is (001) [100] (|b| = 0.65 nm) and for the (101) plane as (101) 101~(|b| = 1.084 nm) although (101) [010] (|b| = 1.105 nm) is possible. Tensile testing showed that at a stress value of 2.3 MPa primary twinning occurred and grew with increasing stress. When the stress was relaxed, the twins decreased in size, but did not disappear. The twinning shear strain was calculated to be 0.353 for the (101) twin plane. Conclusions: HMX is considered to be brittle, compared to other secondary explosives. Comparing HMX with a range of organic solids, the values for hardness numbers are similar to those of other brittle systems. Under the conditions developed beneath a pyramidal indenter, dislocation slip plays a major part in accommodating the local deformation stresses. © 2015 Gallagher et al.; licensee Springer
Study of the Structure of Hyperbranched Polyglycerol Coatings and Their Antibiofouling and Antithrombotic Applications
While blood‐contacting materials are widely deployed in medicine in vascular stents, catheters, and cannulas, devices fail in situ because of thrombosis and restenosis. Furthermore, microbial attachment and biofilm formation is not an uncommon problem for medical devices. Even incremental improvements in hemocompatible materials can provide significant benefits for patients in terms of safety and patency as well as substantial cost savings. Herein, a novel but simple strategy is described for coating a range of medical materials, that can be applied to objects of complex geometry, involving plasma‐grafting of an ultrathin hyperbranched polyglycerol coating (HPG). Plasma activation creates highly reactive surface oxygen moieties that readily react with glycidol. Irrespective of the substrate, coatings are uniform and pinhole free, comprising O─C─O repeats, with HPG chains packing in a fashion that holds reversibly binding proteins at the coating surface. In vitro assays with planar test samples show that HPG prevents platelet adhesion and activation, as well as reducing (>3 log) bacterial attachment and preventing biofilm formation. Ex vivo and preclinical studies show that HPG‐coated nitinol stents do not elicit thrombosis or restenosis, nor complement or neutrophil activation. Subcutaneous implantation of HPG coated disks under the skin of mice shows no evidence of toxicity nor inflammation
Uranium mobility in organic matter-rich sediments: A review of geological and geochemical processes
Uranium (U) is of enormous global importance because of its use in energy generation, albeit with potential environmental legacies. While naturally occurring U is widespread in the Earth's crust at concentrations of ~1 to 3 ppm, higher concentrations can be found, includingwithin organicmatter (OM)-rich sediments, leading to economic extraction opportunities. The primary determinants of U behaviour in ore systems are pH, Eh, U oxidation state (U(IV), U(VI)) and the abundance of CO3 2– ions. The concentration/availability and interrelationships among such determinants vary, and the solubility and mobility of ions (e.g. OH-, CO3 2–, PO4 3-, SiO4 4-, SO4 2-) that compete for U (primarily as U(VI)) will also influence the mobility of U. In addition, the presence of OM can influence U mobility and fate by the degree of OMsorption to mineral surfaces (e.g. Fe- and Si- oxides and hydroxides). Within solid-phase OM, microbes can influence U oxidation state and U stability through direct enzymatic reduction, biosorption, biomineralisation and bioaccumulation. The biogenic UO2 product is, however, reported to be readily susceptible to reoxidation and therefore more likely remobilised over longer time periods. Thus several areas of uncertainty remain with respect to factors contributing to U accumulation, stability and/or (re)mobilisation. To address these uncertainties, this paper reviews U dynamics at both geological and molecular scales. Here we identify U-OMbond values that are in agreement, relatively strong, independent from ionic strength and which may facilitate either U mobilisation or immobilisation, depending on environmental conditions. We also examine knowledge gaps in the literature, with U-OM solubility data generally lacking in comparison to data for U sorption and dissolution, and little information available on multi-component relationships, such as UOM-V (V as vanadate). Furthermore, the capability ofOMto influence the oxidation state of U at near surface conditions remains unclear, as it can be postulated that electron shuttling by OM may contribute to changes in U redox state otherwise mediated by bacteria. Geochemical modelling of the environmental mobility of U will require incorporation of data from multi-corporation studies, as well as from studies of U-OM microbial interactions, all of which are considered in this review
- …