4,229 research outputs found
Interior layers in a reaction-diffusion equation with a discontinuous diffusion coefficient
In this paper a problem arising in the modelling of semiconductor
devices motivates the study of singularly perturbed differential equations of reaction–diffusion type with discontinuous data. The solutions of such problems typically contain interior layers where the gradient of the solution changes rapidly. Parameter–uniform methods based on piecewise–uniform Shishkin meshes are constructed and analysed for such problems. Numerical results are presented to support the theoretical results and to illustrate the benefits of using a piecewise–uniform Shishkin mesh over the use of uniform meshes in the simulation of a simple semiconductor device
Antioxidant synthetic peptides counteracting hyperglycaemia induced endothelial cell dysfunction
The transitional millisecond pulsar IGR J18245-2452 during its 2013 outburst at X-rays and soft gamma-rays
IGR~J18245--2452/PSR J1824--2452I is one of the rare transitional accreting
millisecond X-ray pulsars, showing direct evidence of switches between states
of rotation powered radio pulsations and accretion powered X-ray pulsations,
dubbed transitional pulsars. IGR~J18245--2452 is the only transitional pulsar
so far to have shown a full accretion episode, reaching an X-ray luminosity of
~erg~s permitting its discovery with INTEGRAL in 2013. In
this paper, we report on a detailed analysis of the data collected with the
IBIS/ISGRI and the two JEM-X monitors on-board INTEGRAL at the time of the 2013
outburst. We make use of some complementary data obtained with the instruments
on-board XMM-Newton and Swift in order to perform the averaged broad-band
spectral analysis of the source in the energy range 0.4 -- 250~keV. We have
found that this spectrum is the hardest among the accreting millisecond X-ray
pulsars. We improved the ephemeris, now valid across its full outburst, and
report the detection of pulsed emission up to keV in both the ISGRI
() and Fermi/GBM () bandpass. The alignment of the
ISGRI and Fermi GBM 20 -- 60 keV pulse profiles are consistent at a $\sim25\
\mu$s level. We compared the pulse profiles obtained at soft X-rays with \xmm\
with the soft \gr-ray ones, and derived the pulsed fractions of the fundamental
and first harmonic, as well as the time lag of the fundamental harmonic, up to
s, as a function of energy. We report on a thermonuclear X-ray burst
detected with \Integ, and using the properties of the previously type-I X-ray
burst, we show that all these events are powered primarily by helium ignited at
a depth of g cm. For such a helium
burst the estimated recurrence time of d is in
agreement with the observations.Comment: 10 pages, 6 Figures, 3 Tables Astronomy and Astrophysics Journal,
accepted for publication on the 13th of April 201
Pre-Tactical Prediction of Atfm Delay for Individual Flights
The day prior operations, the operation plan is drawn generating a first set of flight plans with the objective of identifying potential network issues and preparing pre-tactical preventing measures. During the day of operation flight plans will be updated and pre-tactical actions implemented if needed by the duty manager, in order to minimise the propagation of disruption in the network. This paper focuses on the estimation of ATFM delay for individual flights during the pre-tactical phase. The main objective is to anticipate which flights might be affected by ATFM regulations and the amount of delay will be assigned to them
A distributed bio-inspired method for multisite grid mapping
Computational grids assemble multisite and multiowner resources and represent the most promising solutions for processing distributed computationally intensive applications, each composed by a collection of communicating tasks. The execution of an application on a grid presumes three successive steps: the localization of the available resources together with their characteristics and status; the mapping which selects the resources that, during the estimated running time, better support this execution and, at last, the scheduling of the tasks. These operations are very difficult both because the availability and workload of grid resources change dynamically and because, in many cases, multisite mapping must be adopted to exploit all the possible benefits. As the mapping problem in parallel systems, already known as NP-complete, becomes even harder in distributed heterogeneous environments as in grids, evolutionary techniques can be adopted to find near-optimal solutions. In this paper an effective and efficient multisite mapping, based on a distributed Differential Evolution algorithm, is proposed. The aim is to minimize the time required to complete the execution of the application, selecting from among all the potential ones the solution which reduces the use of the grid resources. The proposed mapper is tested on different scenarios
Grover's algorithm on a Feynman computer
We present an implementation of Grover's algorithm in the framework of
Feynman's cursor model of a quantum computer. The cursor degrees of freedom act
as a quantum clocking mechanism, and allow Grover's algorithm to be performed
using a single, time-independent Hamiltonian. We examine issues of locality and
resource usage in implementing such a Hamiltonian. In the familiar language of
Heisenberg spin-spin coupling, the clocking mechanism appears as an excitation
of a basically linear chain of spins, with occasional controlled jumps that
allow for motion on a planar graph: in this sense our model implements the idea
of "timing" a quantum algorithm using a continuous-time random walk. In this
context we examine some consequences of the entanglement between the states of
the input/output register and the states of the quantum clock
Soot particle size distribution measurements in a turbulent ethylene swirl flame
There is a need to better understand particle size distributions (PSDs) from turbulent flames from a theoretical, practical and even regulatory perspective. Experiments were conducted on a sooting turbulent non-premixed swirled ethylene flame with secondary (dilution) air injection to investigate exhaust and in-burner PSDs measured with a Scanning Mobility Particle Sizer (SMPS) and soot volume fractions (fv) using extinction measurements. The focus was to understand the effect of systematically changing the amount and location of dilution air injection on the PSDs and fv inside the burner and at the exhaust. The PSDs were also compared with planar Laser Induced Incandescence (LII) calibrated against the average fv. LII provides some supplemental information on the relative soot amounts and spatial distribution among the various flow conditions that helps interpret the results. For the flame with no air dilution, fv drops gradually along the centreline of the burner towards the exhaust and the PSD shows a shift from larger particles to smaller. However, with dilution air fv reduces sharply where the dilution jets meet the burner axis. Downstream of the dilution jets fv reduces gradually and the PSDs remain unchanged until the exhaust. At the exhaust, the flame with no air dilution shows significantly more particles with an fv one to two orders of magnitude greater compared to the Cases with dilution. This dataset provides insights into soot spatial and particle size distributions within turbulent flames of relevance to gas turbine combustion with differing dilution parameters and the effect dilution has on the particle size. Additionally, this work measures fv using both ex situ and in situ techniques, and highlights the difficulties associated with comparing results across the two. The results are useful for validating advanced models for turbulent combustion.European Union (EU), Horizon 2020 (H2020), Clean Sky 2 Joint Undertaking, Industrial Leadership (IL) (Project LEAFINNOX, grant number 831804
- …