382 research outputs found
Influence of Sawdust Bio-filler on the Tensile, Flexural, and Impact Properties of Mangifera Indica Leaf Stalk Fibre Reinforced Polyester Composites
The need to have biodegradable composites is aloft in today’s market as they are environment friendly and are also easy to fabricate. In this study, mangifera indica leaf stalk fibres were used as reinforcement along with saw dust as bio-filler material. Unsaturated isophthalic polyester resin was used as the matrix. The fibres were treated with 6 % vol. NaOH and neutralized with 3 % vol. of dilute HCl. Treatment of sawdust fillers was done by using 2% vol. NaOH solution. Hand layup method and compression moulding technique was used to fabricate the composite laminates. Specimens for evaluating the mechanical properties were prepared by using water jet machining. The results indicated an increase in tensile, flexural and impact strength of composites with addition of sawdust upto 3%. Further addition of the bio-filler resulted in decrease of mechanical properties
Bias in the journal impact factor
The ISI journal impact factor (JIF) is based on a sample that may represent
half the whole-of-life citations to some journals, but a small fraction (<10%)
of the citations accruing to other journals. This disproportionate sampling
means that the JIF provides a misleading indication of the true impact of
journals, biased in favour of journals that have a rapid rather than a
prolonged impact. Many journals exhibit a consistent pattern of citation
accrual from year to year, so it may be possible to adjust the JIF to provide a
more reliable indication of a journal's impact.Comment: 9 pages, 8 figures; one reference correcte
Surface Treatment Effects on the Mechanical Properties of Silica Carbon Black Reinforced Natural Rubber/Butadiene Rubber Composites
For the first time, phenolic formaldehyde resin (PF)-treated silica carbon black (SiCB) were prepared with different treatment conditions and their effect as fillers on the mechanical properties of filler filled natural rubber/butadiene rubber (NR/BR) composites were investigated in detail. The PF coating layer on the SiCB derived from rusk husk not only promoted the dispersion of the fillers but also improved the interfacial interactions between fillers and the rubber matrix. As a result, both the cross-link density and mechanical properties of the obtained composites were effectively enhanced. The filler SiCB with 3 wt % PF surface treatment greatly improved the tensile strength of NR/BR composites and reached 7.1 MPa, which increased by 73.7% compared with that of SiCB-filled NR/BR composites. The improved interfacial interactions promoted higher energy dissipation, leading to simultaneously enhancing the glass transition temperature of the obtained composites. Due to the easy processing and low cost of filler as well as the effectively enhanced mechanical properties of composites, the PF-coating methodology has a great potential for practical applications in SiCB reinforced high-performance composites. A commercial filler, carbon black (N774), was also used in this study and evaluated under the same conditions for comparison
INFLUENCE OF LIGNIN CONTENT ON PHOTODEGRADATION IN WOOD/HDPE COMPOSITES UNDER UV WEATHERING
The aim of this work was to examine the influence the lignin component of wood on the photodegradation of high-density polyethylene (HDPE) in wood/HDPE (WPE) composites. The neat HDPE and wood/HDPE composites were prepared using a twin screw extruder followed by an injection moulder. The lignin content was varied from 0 to 29 %wt. of wood by the addition of delignified wood pulp into wood flour. The results suggested that the photodegradation of HDPE in WPE composites was accelerated by the presence of lignin; the chromophoric groups in the lignin enhanced UV adsorption onto the WPE composite surface. The carbonyl and vinyl indices, color, percentage crystallinity, and the melting temperature increased when the lignin contents were increased. The color fading in WPE composites resulted from photobleaching of lignin. In addition, the presence of lignin led to the development ofl cracks in WPE composites, especially at high lignin contents. For the effect of UV weathering time, the carbonyl and vinyl indices, discoloration, and percentage crystallinity increased as a function of UV weathering times, whereas the melting temperature of HDPE in both neat HDPE and WPE composites and water absorption of specimens decreased; the wood index in WPE composites increased during the initial UV weathering times and then decreased at 720 h weathering time
Wear Behavior of Wood/PVC Composite for Woodlike Flooring Products
AbstractThe work is to study the effects of load, sliding distance and water absorption on wear properties and mechanism ofwood/PVC composites. The experimental results indicated that the weight loss increased with an increasing load from 250 to 500g. When applying the load at 1000g, the weight loss increased at sliding distance of 0.5-1.5 kilometers followed by stability at sliding distance of 1.5-2.0 kilometers. The longer sliding distance resulted in the greater the weight loss in the wood/PVC composites. The worn surface of wood/PVC composites at loading 250g and 500g at 0.5-1.5 kilometers for sliding distanceshowed wear mechanism of Polyvinylchloride, and that ago 1.5-2.0 kilometers sliding distance, the wear mechanism result from wood flour effect. The three-body abrasion occurred at the load of 1000g at 0.5-1.5 kilometers sliding distance. The transfer film improved wear properties at 1.5-2.0 kilometers sliding distance. In case of the water absorption, the unscrubed specimens had more water absorption than the scrubbed specimens. The weight loss increased due to the increasing of specimen volume and density by water absorption. As a result, the weight loss was high at 3% water absorption. The mechanical wear involved with chemical reactions on the PVC surface. The wear mechanism at 6% and 9% water absorption involved wood resistance effect andabrasive three-body effect, respectively
Effects of a nanoscopic filler on the structure and dynamics of a simulated polymer melt and the relationship to ultra-thin films
We perform molecular dynamics simulations of an idealized polymer melt
surrounding a nanoscopic filler particle to probe the effects of a filler on
the local melt structure and dynamics. We show that the glass transition
temperature of the melt can be shifted to either higher or lower
temperatures by appropriately tuning the interactions between polymer and
filler. A gradual change of the polymer dynamics approaching the filler surface
causes the change in the glass transition. We also find that while the bulk
structure of the polymers changes little, the polymers close to the surface
tend to be elongated and flattened, independent of the type of interaction we
study. Consequently, the dynamics appear strongly influenced by the
interactions, while the melt structure is only altered by the geometric
constraints imposed by the presence of the filler. Our findings show a strong
similarity to those obtained for ultra-thin polymer films (thickness nm) suggesting that both ultra-thin films and filled-polymer systems might
be understood in the same context
Laccase-assisted approach to graft multifunctional materials of interest: keratin-EC based novel composites and their characterisation
This study focuses on the evaluation of raw keratin as a potential material to develop composites with novel characteristics. Herein, we report a mild and eco-friendly fabrication of in-house extracted feather keratin-based novel enzyme assisted composites consisting of ethyl cellulose (EC) as a backbone material. A range of composites between keratin and EC using different keratin: EC ratios were prepared and characterised. Comparing keratin to the composites, the FT-IR peak at 1,630 cm-1 shifted to a lower wavenumber of 1,610 cm-1 in keratin-EC which typically indicates the involvement of β-sheet structures of the keratin during the graft formation process. SEM analysis revealed that the uniform dispersion of the keratin increases the area of keratin-EC contact which further contributes to the efficient functionality of the resulting composites. In comparison to the pristine keratin and EC, a clear shift in the XRD peaks was also observed at the specific region of 2-Theta values of keratin-g-EC. The thermo- mechanical properties of the composites reached their highest levels in comparison to the keratin which was too fragile to be measured for its mechanical properties. Considerable improvement in the water contact angle and surface tension properties was also recorded
Absorbance based light emitting diode optical sensors and sensing devices
The ever increasing demand for in situ monitoring of health, environment and security has created a need for reliable, miniaturised sensing devices. To achieve this,
appropriate analytical devices are required that possess operating characteristics of reliability, low power consumption, low cost, autonomous operation capability and
compatibility with wireless communications systems. The use of light emitting diodes (LEDs) as light sources is one strategy, which has been successfully applied in chemical
sensing. This paper summarises the development and advancement of LED based chemical sensors and sensing devices in terms of their configuration and application, with the focus on transmittance and reflectance absorptiometric measurements
Impact Factor: outdated artefact or stepping-stone to journal certification?
A review of Garfield's journal impact factor and its specific implementation
as the Thomson Reuters Impact Factor reveals several weaknesses in this
commonly-used indicator of journal standing. Key limitations include the
mismatch between citing and cited documents, the deceptive display of three
decimals that belies the real precision, and the absence of confidence
intervals. These are minor issues that are easily amended and should be
corrected, but more substantive improvements are needed. There are indications
that the scientific community seeks and needs better certification of journal
procedures to improve the quality of published science. Comprehensive
certification of editorial and review procedures could help ensure adequate
procedures to detect duplicate and fraudulent submissions.Comment: 25 pages, 12 figures, 6 table
- …