340 research outputs found

    Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy

    No full text
    Cu-Zn alloy is an advanced material, but its deformation twinning mechanism still keeps unknown so far, especially the couple effects of temperature and strain rate. In this paper, a theoretical model of Cu-Zn alloy is proposed by considering the coupled effects of strain rate and temperature. The model can predict the experimentally observed tendency of the spacing evolution of twin boundary (TB) accurately, and it is known that low temperature and high strain rate will promote deformation twinning. Moreover, deformation twining is more susceptible to low temperature than to high strain rate, and TB spacing and twin layer thickness will decrease with high strain rate and low temperature

    In-plane and Out-of-plane Plasma Resonances in Optimally Doped La1.84Sr0.16CuO4

    Full text link
    We addressed the inconsistency between the electron mass anisotropy ratios determined by the far-infrared experiments and DC conductivity measurements. By eliminating possible sources of error and increasing the sensitivity and resolution in the far-infrared reflectivity measurement on the single crystalline and on the polycrystalline La1.84Sr0.16CuO4, we have unambiguously identified that the source of the mass anisotropy problem is in the estimation of the free electron density involved in the charge transport and superconductivity. In this study we found that only 2.8 % of the total doping-induced charge density is itinerant at optimal doping. Our result not only resolves the mass anisotropy puzzle but also points to a novel electronic structure formed by the rest of the electrons that sets the stage for the high temperature superconductivity

    Structure–property relationships of low sintering temperature scheelite-structured (1 − x)BiVO 4 –xLaNbO 4 microwave dielectric ceramics

    Get PDF
    A series of (1 − x)BiVO4–xLaNbO4 (0.0 ≤ x ≤ 1.0) ceramics were prepared via a solid state reaction method. A scheelite-structured solid solution was formed for x ≤ 0.5 but for x > 0.5, tetragonal scheelite, monoclinic LaNbO4-type and La1/3NbO3 phases co-existed. As x increased from 0 to 0.1, the room temperature crystal structure gradually changed from monoclinic to tetragonal scheelite, associated with a decrease in the ferroelastic phase transition temperature from 255 °C (BiVO4) to room temperature or even below. High sintering temperatures were also found to accelerate this phase transition for compositions with x ≤ 0.08. Temperature independent high quality factor Qf >10 000 GHz in a wide temperature range 25–140 °C and high microwave permittivity εr ∼76.3 ± 0.5 was obtained for the x = 0.06 ceramic sintered at 800 °C. However, small changes in composition resulted in a change in the sign and magnitude of the temperature coefficient of resonant frequency (TCF) due to the proximity of the ferroelastic transition to room temperature. If TCF can be controlled and tuned through zero, then (1 − x)BiVO4–xLaNbO4 (0.0 ≤ x ≤ 1.0) is a strong candidate for microwave device applications

    Effects of Exogenous Cellulase Source on In Vitro Fermentation Characteristics and Methane Production of Crop Straws and Grasses

    Get PDF
    In vitro fermentation experiments were conducted to investigate the effects of 3 sources of exogenous cellulase products (EC) at 4 dose rates (DR) (0, 12, 37 and 62 IU/g of DM) on degradation of forage and methane production by mixed rumen micro-organisms of goats. The maximum gas production (Vf) of grasses was higher (P<0.001) in Neocallimastix patriciarum (NP) group than those in Trichoderma reesei (TR) and Trichoderma longibrachiatum (TL) groups. Quadratic increases in dry matter degradation (DMD) of forage and neutral detergent fiber (NDFD) of straw were observed for all EC, with optimum DR in the low range. Supplementation of EC originated from TR and NP increased (P<0.001) DMD of forage compared to that from TL. Addition of EC originated from TR and NP also decreased pH value, ammonia nitrogen (NH3-N) and methane (CH4) production compared to that from TL. Quadratic decreases in pH value, NH3-N and CH4 of forage were noted for EC of TR and NP, and with optimum DR in the low range. For short chain fatty acid, the EC of NP increased total volatile fatty acid (TVFA) and acetate concentration and the ratio of acetate to propionate of forage compared with EC of TL and TR, and with optimum DR in the low to medium range. It was concluded that the source of EC differed in fiber degradation and methane emission, and with optimum DR of TR in the low range (from 12 to 37 U/g DM) in improving fiber degradation and decreasing methane emission

    Temperature stable K0.5(Nd1−xBix)0.5MoO4 microwave dielectrics ceramics with ultra-low sintering temperature

    Get PDF
    K 0.5 (Nd 1-x Bi x ) 0.5 MoO 4 (0.2 ≤ x ≤ 0.7) ceramics were prepared via the solid-state reaction method. All ceramics densified below 720°C with a uniform microstructure. As x increased from 0.2 to 0.7, relative permittivity (e(open) r ) increased from 13.6 to 26.2 commensurate with an increase in temperature coefficient of resonant frequency (TCF) from - 31 ppm/°C to + 60 ppm/°C and a decrease in Qf value (Q = quality factor; f = resonant frequency) from 23 400 to 8620 GHz. Optimum TCF was obtained for x = 0.3 (-15 ppm/°C) and 0.4 (+4 ppm/°C) sintered at 660 and 620°C with e(open) r ~15.4, Q f ~19 650 GHz, and e(open) r ~17.3, Q f ~13 050 GHz, respectively. Ceramics in this novel solid solution are a candidate for ultra low temperature co-fired ceramic (ULTCC) technology

    Unconventional magnetic phase diagram of cuprate superconductor La2-xSrxCuO4 at quantum critical point x = 1/9

    Full text link
    We propose a new magnetic phase diagram of La2-xSrxCuO4 around a quantum critical point x = 1/9 based on field-cooled magnetization measurements and critical fittings. A new phase boundary Tm2(H) is discovered which buries deeply below the first order vortex melting line in the vortex solid phase. The coupling between superconductivity and antiferromagnetism is found to be attractive below Tm2(H) while repulsive above. The attractive coupling between superconducting order and static antiferromagnetic order provides compelling experimental evidence that the antiferromagnetism microscopically coexists and collaborates with the high temperature superconductivity in cuprates.Comment: 17 pages, 4 figure

    Microwave and terahertz dielectric properties of MgTiO3–CaTiO3 ceramics

    Get PDF
    The THz dielectric properties of MgTiO3–CaTiO3 ceramics are reported. The ceramics were prepared via a solid-state reaction route and the sintering conditions were optimized to obtain ceramics with high permittivity and low loss in the terahertz frequency domain. The amount of impurities (MgTi2O5) and grain size increased with increasing sintering temperature. The dielectric properties improved with increasing density, and the best terahertz dielectric performance was obtained at 1260 °C, with a permittivity of 17.73 and loss of 3.07×10−3. Ceramics sintered above 1260 °C showed a sharp increase in loss, which is ascribed to an increase in the impurity content

    Hepatic scavenger receptor class B type 1 knockdown reduces atherosclerosis and enhances the antiatherosclerotic effect of brown fat activation in APOE*3-Leiden.CETP mice

    Get PDF
    Objective:Brown fat activation attenuates atherosclerosis development by accelerating triglyceride-rich lipoprotein turnover and/or stimulation of reverse cholesterol transport via the SRB1 (scavenger receptor class B type 1). The aim of this study was to investigate the specific role of hepatic SRB1 in the atheroprotective properties of brown fat activation.Approach and Results:APOE*3-Leiden.CETP mice, a well-established model of human-like lipoprotein metabolism and atherosclerosis, were treated with vehicle or adenoassociated virus serotype 8-short hairpin RNA, which decreased hepatic SRB1 protein levels by 40% to 55%. After 2 weeks, mice without or with hepatic SRB1 knockdown were treated with vehicle or the beta 3-adrenergic receptor agonist CL316 243 to activate brown fat for 4 weeks to determine HDL (high-density lipoprotein) catabolism and for 9 weeks to evaluate atherosclerosis. Surprisingly, hepatic SRB1 knockdown additively improved the beneficial effects of beta 3-adrenergic receptor agonism on atherosclerosis development. In fact, hepatic SRB1 knockdown per se not only increased HDL-cholesterol levels but also reduced plasma triglyceride and non-HDL-cholesterol levels, thus explaining the reduction in atherosclerosis development. Mechanistic studies indicated that this is due to increased lipolytic processing and hepatic uptake of VLDL (very low density lipoprotein) by facilitating VLDL-surface transfer to HDL.Conclusions:Hepatic SRB1 knockdown in a mouse model with an intact ApoE (apolipoprotein E)-LDLR (low density lipoprotein receptor) clearance pathway, relevant to human lipoprotein metabolism, reduced atherosclerosis and improved the beneficial effect of brown fat activation on atherosclerosis development, explained by pleiotropic effects of hepatic SRB1 knockdown on lipolytic processing and hepatic uptake of VLDL. Brown fat activation could thus be an effective strategy to treat cardiovascular disease also in subjects with impaired SRB1 function.Functional Genomics of Systemic Disorder
    corecore