4,294 research outputs found

    Nanofiber fabrication in a temperature and humidity controlled environment for improved fibre consistency

    Get PDF
    To fabricate nanofibers with reproducible characteristics, an important demand for many applications, the effect of controlled atmospheric conditions on resulting electrospun cellulose acetate (CA) nanofibers was evaluated for temperature ranging 17.5 - 35°C and relative humidity ranging 20% - 70%. With the potential application of nanofibers in many industries, especially membrane and filter fabrication, their reproducible production must be established to ensure commercially viability.
Cellulose acetate (CA) solution (0.2 g/ml) in a solvent mixture of acetone/DMF/ethanol (2:2:1) was electrospun into nonwoven fibre mesh with the fibre diameter ranging from 150nm to 1µm.
The resulting nanofibers were observed and analyzed by scanning electron microscopy (SEM), showing a correlation of reducing average fibre diameter with increasing atmospheric temperature. A less pronounced correlation was seen with changes in relative humidity regarding fibre diameter, though it was shown that increased humidity reduced the effect of fibre beading yielding a more consistent, and therefore better quality of fibre fabrication.
Differential scanning calorimetry (DSC) studies observed lower melt enthalpies for finer CA nanofibers in the first heating cycle confirming the results gained from SEM analysis. From the conditions that were explored in this study the temperature and humidity that gave the most suitable fibre mats for a membrane purpose were 25.0°C and 50%RH due to the highest level of fibre diameter uniformity, the lowest level of beading while maintaining a low fibre diameter for increased surface area and increased pore size homogeneity. This study has highlighted the requirement to control the atmospheric conditions during the electrospinning process in order to fabricate reproducible fibre mats

    Pinwheel VBS state and triplet excitations in the two-dimensional deformed kagome lattice

    Full text link
    Determining ground states of correlated electron systems is fundamental to understanding novel phenomena in condensed matter physics. A difficulty, however, arises in a geometrically frustrated system in which the incompatibility between the global topology of an underlying lattice and local spin interactions gives rise to macroscopically degenerate ground states, potentially prompting the emergence of quantum spin states, such as resonating valence bond (RVB) and valence bond solid (VBS). Although theoretically proposed to exist in a kagome lattice -- one of the most highly frustrated lattices in two dimensions (2D) being comprised of corner-sharing triangles -- such quantum-fluctuation-induced states have not been observed experimentally. Here we report the first realization of the "pinwheel" VBS ground state in the S=1/2 deformed kagome lattice antiferromagnet Rb2Cu3SnF12. In this system, a lattice distortion breaks the translational symmetry of the ideal kagome lattice and stabilizes the VBS state.Comment: 10 pages, 4 figures and Supplemental Informatio

    Electrically Tunable Excitonic Light Emitting Diodes based on Monolayer WSe2 p-n Junctions

    Full text link
    Light-emitting diodes are of importance for lighting, displays, optical interconnects, logic and sensors. Hence the development of new systems that allow improvements in their efficiency, spectral properties, compactness and integrability could have significant ramifications. Monolayer transition metal dichalcogenides have recently emerged as interesting candidates for optoelectronic applications due to their unique optical properties. Electroluminescence has already been observed from monolayer MoS2 devices. However, the electroluminescence efficiency was low and the linewidth broad due both to the poor optical quality of MoS2 and to ineffective contacts. Here, we report electroluminescence from lateral p-n junctions in monolayer WSe2 induced electrostatically using a thin boron nitride support as a dielectric layer with multiple metal gates beneath. This structure allows effective injection of electrons and holes, and combined with the high optical quality of WSe2 it yields bright electroluminescence with 1000 times smaller injection current and 10 times smaller linewidth than in MoS2. Furthermore, by increasing the injection bias we can tune the electroluminescence between regimes of impurity-bound, charged, and neutral excitons. This system has the required ingredients for new kinds of optoelectronic devices such as spin- and valley-polarized light-emitting diodes, on-chip lasers, and two-dimensional electro-optic modulators.Comment: 13 pages main text with 4 figures + 4 pages upplemental material

    Estrogen-dependent dynamic profile of eNOS-DNA associations in prostate cancer

    Get PDF
    In previous work we have documented the nuclear translocation of endothelial NOS (eNOS) and its participation in combinatorial complexes with Estrogen Receptor Beta (ERβ) and Hypoxia Inducible Factors (HIFs) that determine localized chromatin remodeling in response to estrogen (E2) and hypoxia stimuli, resulting in transcriptional regulation of genes associated with adverse prognosis in prostate cancer (PCa). To explore the role of nuclear eNOS in the acquisition of aggressive phenotype in PCa, we performed ChIP-Sequencing on chromatin-associated eNOS from cells from a primary tumor with poor outcome and from metastatic LNCaP cells. We found that: 1. the eNOS-bound regions (peaks) are widely distributed across the genome encompassing multiple transcription factors binding sites, including Estrogen Response Elements. 2. E2 increased the number of peaks, indicating hormone-dependent eNOS re-localization. 3. Peak distribution was similar with/without E2 with ≈ 55% of them in extragenic DNA regions and an intriguing involvement of the 5′ domain of several miRs deregulated in PCa. Numerous potentially novel eNOS-targeted genes have been identified suggesting that eNOS participates in the regulation of large gene sets. The parallel finding of downregulation of a cluster of miRs, including miR-34a, in PCa cells associated with poor outcome led us to unveil a molecular link between eNOS and SIRT1, an epigenetic regulator of aging and tumorigenicity, negatively regulated by miR-34a and in turn activating eNOS. E2 potentiates miR-34a downregulation thus enhancing SIRT1 expression, depicting a novel eNOS/SIRT1 interplay fine-tuned by E2-activated ER signaling, and suggesting that eNOS may play an important role in aggressive PCa

    Non-Equilibrium Field Dynamics of an Honest Holographic Superconductor

    Full text link
    Most holographic models of superconducting systems neglect the effects of dynamical boundary gauge fields during the process of spontaneous symmetry-breaking. Usually a global symmetry gets broken. This yields a superfluid, which then is gauged "weakly" afterwards. In this work we build (and probe the dynamics of) a holographic model in which a local boundary symmetry is spontaneously broken instead. We compute two-point functions of dynamical non-Abelian gauge fields in the normal and in the broken phase, and find non-trivial gapless modes. Our AdS3 gravity dual realizes a p-wave superconductor in (1+1) dimensions. The ground state of this model also breaks (1+1)-dimensional parity spontaneously, while the Hamiltonian is parity-invariant. We discuss possible implications of our results for a wider class of holographic liquids.Comment: 32 pages, 12 figures; v3: string theory derivation of setup added (section 3.1), improved presentation, version accepted by JHEP; v2: paragraph added to discussion, figure added, references added, typos correcte

    Reconstruction of the complete characteristics of the hydro turbine based on inner energy loss

    Get PDF
    The power output characteristics of the hydro turbine is one of the core contents for transient calculation of the hydro turbine generating sets (HTGS). In particular, the hydro turbine operates far beyond the given parameters region during the load rejection transient. As such, obtaining the complete characteristics of the hydro turbine becomes one of the key issues in calculating the transient process. In this study, methods for calculating the energy losses are proposed by analyzing the general characteristics of the inner energy losses within the hydro turbine. Characteristic parameters in the hydro turbine power model are calculated from the synthetical characteristics of the model hydro turbine. The transient power model of the hydro turbine has been established and applied to calculate and reconstruct the complete characteristics of the hydro turbine. Furthermore, the relationship curve between the mechanical friction loss power and the rotation speed under different head can be established by combing the runaway curve with the proposed turbine power model. This relationship is applied to construct the complete characteristics of the mechanical friction loss. Combining the proposed two complete characteristics, the power model of the hydro turbine is suitable for simulation with a wide range of fluctuations as well as the load rejection transient. Details of the computational procedures are presented and demonstrated using a case study.The research reported here is financially supported by the National Natural Science Foundation of China under Grant No. 51579124, 51469011,51279071

    Characterization of a Large Group of Individuals with Huntington Disease and Their Relatives Enrolled in the COHORT Study

    Get PDF
    Careful characterization of the phenotype and genotype of Huntington disease (HD) can foster better understanding of the condition.We conducted a cohort study in the United States, Canada, and Australia of members of families affected by HD. We collected demographic and clinical data, conducted the Unified Huntington's Disease Rating Scale and Mini-Mental State Examination, and determined Huntingtin trinucleotide CAG repeat length. We report primarily on cross-sectional baseline data from this recently completed prospective, longitudinal, observational study.As of December 31, 2009, 2,318 individuals enrolled; of these, 1,985 (85.6%) were classified into six analysis groups. Three groups had expanded CAG alleles (36 repeats or more): individuals with clinically diagnosed HD [n = 930], and clinically unaffected first-degree relatives who had previously pursued [n = 248] or not pursued [n = 112] predictive DNA testing. Three groups lacked expanded alleles: first-degree relatives who had previously pursued [n = 41] or not pursued [n = 224] genetic testing, and spouses and caregivers [n = 430]. Baseline mean performance differed across groups in all motor, behavioral, cognitive, and functional measures (p<0.001). Clinically unaffected individuals with expanded alleles weighed less (76.0 vs. 79.6 kg; p = 0.01) and had lower cognitive scores (28.5 vs. 29.1 on the Mini Mental State Examination; p = 0.008) than individuals without expanded alleles. The frequency of "high normal" repeat lengths (27 to 35) was 2.5% and repeat lengths associated with reduced penetrance (36 to 39) was 2.7%.Baseline analysis of COHORT study participants revealed differences that emerge prior to clinical diagnosis. Longitudinal investigation of this cohort will further characterize the natural history of HD and genetic and biological modifiers.Clinicaltrials.gov NCT00313495
    corecore