167 research outputs found
Remarks on Hawking radiation as tunneling from the BTZ black holes
Hawking radiation viewed as a semiclassical tunneling process from the event
horizon of the (2 + 1)-dimensional rotating BTZ black hole is carefully
reexamined by taking into account not only the energy conservation but also the
conservation of angular momentum when the effect of the emitted particle's
self-gravitation is incorporated. In contrast to previous analysis of this
issue in the literature, our result obtained here fits well to the
Kraus-Parikh-Wilczek's universal conclusion without any modification to the
Bekenstein-Hawking area-entropy formulae of the BTZ black hole.Comment: 12pages, no figure, use JHEP3.cls. Version better than published one
in JHE
Structural Strength and Service Life of the Extrusion Forming Die for Agricultural Engine Piston Heads
Three-tier high-strength prestressed combination concave dies are designed to manifacture highpower corn combine harvester engine piston heads. This design integrates the advantages of traditional casting or hot die forging and warm extrusion. The following key parameters, viz radial dimensions of each mating layer, axial bonding and radial contact interaction, are obtained by theoretical calculation. Nonlinear analysis of the contact interaction was carried out, and the die contact condition was studied at no-load and full-load. Based on the Archard wear theory, thermomechanical bonding was studied in operation of the die. Through numerical simulation of the die wear in each operation cycle, the univariate linear regression equation of the die service life was derived, and the reliability of this equation was verified. The results show that the die contact is both stable and reliable if the radial contact interaction of the inner and outer layers is δ₂= 1.9716 mm and δ₃= 1.3870 mm, respectively. With the nitriding layer thickness of 0.24 mm, the extrusion die service life in the production of piston heads corresponds to 6357 pieces.Разработаны трехъярусные высокопрочные предварительно-напряженные многоместные вогнутые головки для изготовления днищ поршня двигателя мощного кукурузоуборочного комбайна. Конструкция соединяет в себе преимущества литья или горячей ковки и горячей экструзии. Радиальные размеры каждого соединяемого слоя, осевое сцепление и радиальное контактное взаимодействие рассчитаны теоретически. Выполнен нелинейный анализ контактного взаимодействия, изучены условия контактирования в головке при нулевой и полной нагрузке. На основании теории износа Арчарда выполнена оценка термомеханического сцепления в процессе эксплуатации головки. Путем численного моделирования износа головки в каждом рабочем цикле получено однопараметрическое уравнение линейной регрессии для срока ее службы; проверена достоверность данного уравнения. Показано, что контакт в головке устойчив и надежен, при радиальном контактном взаимодействии внутреннего и наружного слоев δ₂= 1.9716 мм и δ₃= 1.3870 мм соответственно. При толщине нитридного слоя 0,24 мм срок службы экструзионной головки в производстве днищ поршня соответствует 6357 изделиям
The superconductivity at 18 K in LiFeAs system
A new iron arsenide superconducting system LiFeAs was found that crystallizes
into a tetragonal structure with space group P4/nmm. The superconductivity with
Tc up to 18 K was observed in the compounds. This simple 111 type layered iron
arsenide superconductor can be viewed as an analogue of the infinite layer
structure of copper oxides.Comment: 11 pages 3 Figure
High Altitude test of RPCs for the ARGO-YBJ experiment
A 50 m**2 RPC carpet was operated at the YangBaJing Cosmic Ray Laboratory
(Tibet) located 4300 m a.s.l. The performance of RPCs in detecting Extensive
Air Showers was studied. Efficiency and time resolution measurements at the
pressure and temperature conditions typical of high mountain laboratories, are
reported.Comment: 16 pages, 10 figures, submitted to Nucl. Instr. Met
The ARGO-YBJ Experiment Progresses and Future Extension
Gamma ray source detection above 30TeV is an encouraging approach for finding
galactic cosmic ray origins. All sky survey for gamma ray sources using wide
field of view detector is essential for population accumulation for various
types of sources above 100GeV. To target the goals, the ARGO-YBJ experiment has
been established. Significant progresses have been made in the experiment. A
large air shower detector array in an area of 1km2 is proposed to boost the
sensitivity. Hybrid detection with multi-techniques will allow a good
discrimination between different types of primary particles, including photons
and protons, thus enable an energy spectrum measurement for individual specie.
Fluorescence light detector array will extend the spectrum measurement above
100PeV where the second knee is located. An energy scale determined by balloon
experiments at 10TeV will be propagated to ultra high energy cosmic ray
experiments
Spectroscopy of the Einstein-Maxwell-Dilaton-Axion black hole
The entropy spectrum of a spherically symmetric black hole was derived via
the Bohr-Sommerfeld quantization rule in Majhi and Vagenas's work. Extending
this work to charged and rotating black holes, we quantize the horizon area and
the entropy of an Einstein-Maxwell-Dilaton-Axion (EMDA) black hole via the
Bohr-Sommerfeld quantization rule and the adiabatic invariance. The result
shows the area spectrum and the entropy spectrum are respectively equally
spaced and independent on the parameters of the black hole.Comment: 9 page
One-dimensional quantum channel and Hawking radiation of the Kerr and Kerr-Newman black holes
In this paper, we review the one-dimensional quantum channel and investigate
Hawking radiation of bosons and fermions in Kerr and Kerr-Newman black holes.
The result shows the Hawking radiation can be described by the quantum channel.
The thermal conductances are derived and related to the black holes'
temperatures.Comment: V2, 12 pages. Typo correcte
Measurement of the Atmospheric Muon Spectrum from 20 to 3000 GeV
The absolute muon flux between 20 GeV and 3000 GeV is measured with the L3
magnetic muon spectrometer for zenith angles ranging from 0 degree to 58
degree. Due to the large exposure of about 150 m2 sr d, and the excellent
momentum resolution of the L3 muon chambers, a precision of 2.3 % at 150 GeV in
the vertical direction is achieved.
The ratio of positive to negative muons is studied between 20 GeV and 500
GeV, and the average vertical muon charge ratio is found to be 1.285 +- 0.003
(stat.) +- 0.019 (syst.).Comment: Total 32 pages, 9Figure
Quantifying atmospheric nitrogen deposition through a nationwide monitoring network across China
A Nationwide Nitrogen Deposition Monitoring Network (NNDMN) containing 43 monitoring sites was established in China to measure gaseous NH3, NO2, and HNO3 and particulate NH4+ and NO3− in air and/or precipitation from 2010 to 2014. Wet/bulk deposition fluxes of Nr species were collected by precipitation gauge method and measured by continuous-flow analyzer; dry deposition fluxes were estimated using airborne concentration measurements and inferential models. Our observations reveal large spatial variations of atmospheric Nr concentrations and dry and wet/bulk Nr deposition. On a national basis, the annual average concentrations (1.3–47.0 μg N m−3) and dry plus wet/bulk deposition fluxes (2.9–83.3 kg N ha−1 yr−1) of inorganic Nr species are ranked by land use as urban > rural > background sites and by regions as north China > southeast China > southwest China > northeast China > northwest China > Tibetan Plateau, reflecting the impact of anthropogenic Nr emission. Average dry and wet/bulk N deposition fluxes were 20.6 ± 11.2 (mean ± standard deviation) and 19.3 ± 9.2 kg N ha−1 yr−1 across China, with reduced N deposition dominating both dry and wet/bulk deposition. Our results suggest atmospheric dry N deposition is equally important to wet/bulk N deposition at the national scale. Therefore, both deposition forms should be included when considering the impacts of N deposition on environment and ecosystem health
ARGO-YBJ constraints on very high energy emission from GRBs
The ARGO-YBJ (Astrophysical Radiation Ground-based Observatory at YangBaJing)
experiment is designed for very high energy -astronomy and cosmic ray
researches. Due to the full coverage of a large area () with
resistive plate chambers at a very high altitude (4300 m a.s.l.), the ARGO-YBJ
detector is used to search for transient phenomena, such as Gamma-ray bursts
(GRBs). Because the ARGO-YBJ detector has a large field of view (2 sr)
and is operated with a high duty cycle (90%), it is well suited for GRB
surveying and can be operated in searches for high energy GRBs following alarms
set by satellite-borne observations at lower energies. In this paper, the
sensitivity of the ARGO-YBJ detector for GRB detection is estimated. Upper
limits to fluence with 99% confidence level for 26 GRBs inside the field of
view from June 2006 to January 2009 are set in the two energy ranges 10100
GeV and 10 GeV1 TeV.Comment: accepted for publication in Astroparticle Physic
- …