Analysis of Slab and Slab Heater Cover in a Compact Endless Cast and Rolling Mill Process using Finite Element Methods

Compact Endless cast and rolling Mill (CEM) processes were developed and used to fabricate steel products such as steel slabs. However, the coiling furnace in this process was very expensive, so a new layout was suggested. As the coiling furnace was removed, the interval among the slab heaters had to be increased. This led to a temperature drop in the slab. The temperature distribution of the slab impacts quality, so new layout was developed. This paper presents a Finite Element Method (FEM) simulation of thermal behavior in the slab employing slab heater covers. All of the simulation results were verified by comparing them with experimental results. The slab moving distance at which the temperature was saturated during the process was determined to consider the steady-state and analyze the temperature distribution of the slab and slab heater. Those results revealed that the efficiency of heat conservation increased by more than 50% using the slab heater cover. Finally, a sensitivity analysis of the slab heater cover was conducted with respect to the cover design. The effects of insulator thickness, the gap distance between the slab and cover, and material parameters such as density, and specific heat were investigated to optimize the design of the slab heater cover to produce the best quality slab.11Ysciescopuskc

VIABILITY, FATTY ACID COMPOSITION, AND STRUCTURE OF THE CORALLINE ALGA CORALLINA PILULIFERA

The decrease in the seaweed flora in some rocky areas, known as algal whitening or barren ground, is associated with some species of coralline algae. To determine the biological characteristics of a representative species of branched coralline alga, the number of medullary tiers was counted and ranged from 12 to 16. The 18S rDNA, psbA, and rbcL genes were used to confirm the identification of Corallina pilulifera. Measuring viability using triphenyl tetrazolium chloride showed highly viability from December to January. Cultural conditions of 16 C, 16 h light:8 h dark cycle, and 40 mu E m(-2) s(-1) light intensity were optimal for maintaining the viability of the coralline alga for up to three days. The fatty acids included 31.4% omega-3 eicosapentaenoic acid. Scanning electron microscopy of the surface structure revealed unique round wells about 7.9 +/- 1.3 mu m in diameter. The coralline alga, preventing fleshy seaweeds, may be used as a potential template for the creation of new environmentally friendly biomimetic antifouling material against the attachment of soft foulants, especially micro- and macroalgae.X111Ysciescopu

Localized amyloidosis presenting with a penile mass: a case report

Amyloidosis is a disease characterized by the deposition of altered proteins in tissues. Amyloid deposition always occurs in the extracellular matrix and presents a fibrillary conformation. Local deposition of amyloid may occur in individual organs, without systemic involvement. We report here a rare case of localized penile shaft amyloidosis--an unusual location for amyloid deposition--presenting as a penile mass that resulted in a urethral stricture in 37-year old male patient. We have also comprehensively reviewed the literature regarding localized amyloidosis

Spatial Functional Characteristics of East Asian Patients with Occult Macular Dystrophy (Miyake disease); EAOMD Report No.2

PURPOSE: To describe the functional phenotypic features of East Asian patients with RP1L1-associated occult macular dystrophy (i.e., Miyake disease). DESIGN: An international multi-center retrospective cohort study. METHODS: Twenty-eight participants (53 eyes) with Miyake disease were enrolled at three centres: in Japan, China, and Korea. Ophthalmological examinations including spectral-domain optic coherence tomography (SD-OCT) and multifocal electroretinogram (mfERG) were performed. Patients were classified into three functional groups based on mfERG: Group 1, paracentral dysfunction with relatively preserved central/peripheral function; Group 2, homogeneous central dysfunction with preserved peripheral function; and Group 3, widespread dysfunction over the recorded area. Three functional phenotypes were compared in clinical parameters and SD-OCT morphological classification (severe phenotype, blurred/flat ellipsoid zone and absence of the interdigitation zone; mild phenotype, preserved ellipsoid zone). RESULTS: There were eight eyes in Group 1, 40 eyes in Group 2, and five eyes in Group 3. The patients in Group 1 showed significantly later onset (P=.005) and shorter disease duration (P=.002), compared with those in Group 2. All eight eyes in Group 1 showed the mild morphological phenotype, while 43/45 eyes in Groups 2 and 3 presented the severe phenotype, which identified a significant association between the functional grouping and the morphological classification (P<.001). CONCLUSIONS: A spectrum of functional phenotypes of Miyake disease was first documented with identifying three functional subtypes. Patients with paracentral dysfunction had the mildest phenotype, and those with homogeneous central or widespread dysfunction showed overlapping clinical findings with severe photoreceptor changes, suggesting various extents of visual impairment

Cation-swapped homogeneous nanoparticles in perovskite oxides for high power density

Exsolution has been intensively studied in the fields of energy conversion and storage as a method for the preparation of catalytically active and durable metal nanoparticles. Under typical conditions, however, only a limited number of nanoparticles can be exsolved from the host oxides. Herein, we report the preparation of catalytic nanoparticles by selective exsolution through topotactic ion exchange, where deposited Fe guest cations can be exchanged with Co host cations in PrBaMn1.7Co0.3O5+delta. Interestingly, this phenomenon spontaneously yields the host PrBaMn1.7Fe0.3O5+delta, liberating all the Co cations from the host owing to the favorable incorporation energy of Fe into the lattice of the parent host (Delta E-incorporation = -0.41 eV) and the cation exchange energy (Delta E-exchange = -0.34 eV). Remarkably, the increase in the number of exsolved nanoparticles leads to their improved catalytic activity as a solid oxide fuel cell electrode and in the dry reforming of methane

Antifibrinolytic Role of a Bee Venom Serine Protease Inhibitor That Acts as a Plasmin Inhibitor

Bee venom is a rich source of pharmacologically active substances. In this study, we identified a bumblebee (Bombus ignitus) venom Kunitz-type serine protease inhibitor (Bi-KTI) that acts as a plasmin inhibitor. Bi-KTI showed no detectable inhibitory effect on factor Xa, thrombin, or tissue plasminogen activator. In contrast, Bi-KTI strongly inhibited plasmin, indicating that it acts as an antifibrinolytic agent; however, this inhibitory ability was two-fold weaker than that of aprotinin. The fibrin(ogen)olytic activities of B. ignitus venom serine protease (Bi-VSP) and plasmin in the presence of Bi-KTI indicate that Bi-KTI targets plasmin more specifically than Bi-VSP. These findings demonstrate a novel mechanism by which bumblebee venom affects the hemostatic system through the antifibrinolytic activity of Bi-KTI and through Bi-VSP-mediated fibrin(ogen)olytic activities, raising interest in Bi-KTI and Bi-VSP as potential clinical agents

Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron

We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |\eta| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of \eta-\phi space; toward, away, and transverse, where \phi is the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions.Comment: Submitted to Phys.Rev.

Precision measurement of the top quark mass from dilepton events at CDF II

We report a measurement of the top quark mass, M_t, in the dilepton decay channel of $t\bar{t}\to b\ell'^{+}\nu_{\ell'}\bar{b}\ell^{-}\bar{\nu}_{\ell}$ using an integrated luminosity of 1.0 fb^{-1} of p\bar{p} collisions collected with the CDF II detector. We apply a method that convolutes a leading-order matrix element with detector resolution functions to form event-by-event likelihoods; we have enhanced the leading-order description to describe the effects of initial-state radiation. The joint likelihood is the product of the likelihoods from 78 candidate events in this sample, which yields a measurement of M_{t} = 164.5 \pm 3.9(\textrm{stat.}) \pm 3.9(\textrm{syst.}) \mathrm{GeV}/c^2, the most precise measurement of M_t in the dilepton channel.Comment: 7 pages, 2 figures, version includes changes made prior to publication by journa