170 research outputs found
Radical chemistry and ozone production at a UK coastal receptor site
OH, HO2, total and partially speciated RO2, and OH reactivity (kOH′) were measured during the July 2015 ICOZA (Integrated Chemistry of OZone in the Atmosphere) project that took place at a coastal site in north Norfolk, UK. Maximum measured daily OH, HO2 and total RO2 radical concentrations were in the range 2.6–17 × 106, 0.75–4.2 × 108 and 2.3–8.0 × 108 molec. cm−3, respectively. kOH′ ranged from 1.7 to 17.6 s−1, with a median value of 4.7 s−1. ICOZA data were split by wind direction to assess differences in the radical chemistry between air that had passed over the North Sea (NW–SE sectors) and that over major urban conurbations such as London (SW sector). A box model using the Master Chemical Mechanism (MCMv3.3.1) was in reasonable agreement with the OH measurements, but it overpredicted HO2 observations in NW–SE air in the afternoon by a factor of ∼ 2–3, although slightly better agreement was found for HO2 in SW air (factor of ∼ 1.4–2.0 underprediction). The box model severely underpredicted total RO2 observations in both NW–SE and SW air by factors of ∼ 8–9 on average. Measured radical and kOH′ levels and measurement–model ratios displayed strong dependences on NO mixing ratios, with the results suggesting that peroxy radical chemistry is not well understood under high-NOx conditions. The simultaneous measurement of OH, HO2, total RO2 and kOH′ was used to derive experimental (i.e. observationally determined) budgets for all radical species as well as total ROx (i.e. OH + HO2 + RO2). In NW–SE air, the ROx budget could be closed during the daytime within experimental uncertainty, but the rate of OH destruction exceeded the rate of OH production, and the rate of HO2 production greatly exceeded the rate of HO2 destruction, while the opposite was true for RO2. In SW air, the ROx budget analysis indicated missing daytime ROx sources, but the OH budget was balanced, and the same imbalances were found with the HO2 and RO2 budgets as in NW–SE air. For HO2 and RO2, the budget imbalances were most severe at high-NO mixing ratios, and the best agreement between HO2 and RO2 rates of production and destruction rates was found when the RO2 + NO rate coefficient was reduced by a factor of 5. A photostationary-steady-state (PSS) calculation underpredicted daytime OH in NW–SE air by ∼ 35 %, whereas agreement (∼ 15 %) was found within instrumental uncertainty (∼ 26 % at 2σ) in SW air. The rate of in situ ozone production (P(Ox)) was calculated from observations of ROx, NO and NO2 and compared to that calculated from MCM-modelled radical concentrations. The MCM-calculated P(Ox) significantly underpredicted the measurement-calculated P(Ox) in the morning, and the degree of underprediction was found to scale with NO
Active Brownian Particles. From Individual to Collective Stochastic Dynamics
We review theoretical models of individual motility as well as collective
dynamics and pattern formation of active particles. We focus on simple models
of active dynamics with a particular emphasis on nonlinear and stochastic
dynamics of such self-propelled entities in the framework of statistical
mechanics. Examples of such active units in complex physico-chemical and
biological systems are chemically powered nano-rods, localized patterns in
reaction-diffusion system, motile cells or macroscopic animals. Based on the
description of individual motion of point-like active particles by stochastic
differential equations, we discuss different velocity-dependent friction
functions, the impact of various types of fluctuations and calculate
characteristic observables such as stationary velocity distributions or
diffusion coefficients. Finally, we consider not only the free and confined
individual active dynamics but also different types of interaction between
active particles. The resulting collective dynamical behavior of large
assemblies and aggregates of active units is discussed and an overview over
some recent results on spatiotemporal pattern formation in such systems is
given.Comment: 161 pages, Review, Eur Phys J Special-Topics, accepte
Treatment-limiting renal tubulopathy in patients treated with tenofovir disoproxil fumarate.
OBJECTIVES: Tenofovir disoproxil fumarate (TDF) is widely used in the treatment or prevention of HIV and hepatitis B infection. TDF may cause renal tubulopathy in a small proportion of recipients. We aimed to study the risk factors for developing severe renal tubulopathy. METHODS: We conducted an observational cohort study with retrospective identification of cases of treatment-limiting tubulopathy during TDF exposure. We used multivariate Poisson regression analysis to identify risk factors for tubulopathy, and mixed effects models to analyse adjusted estimated glomerular filtration rate (eGFR) slopes. RESULTS: Between October 2002 and June 2013, 60 (0.4%) of 15,983 patients who had received TDF developed tubulopathy after a median exposure of 44.1 (IQR 20.4, 64.4) months. Tubulopathy cases were predominantly male (92%), of white ethnicity (93%), and exposed to antiretroviral regimens that contained boosted protease inhibitors (PI, 90%). In multivariate analysis, age, ethnicity, CD4 cell count and use of didanosine or PI were significantly associated with tubulopathy. Tubulopathy cases experienced significantly greater eGFR decline while receiving TDF than the comparator group (-6.60 [-7.70, -5.50] vs. -0.34 [-0.43, -0.26] mL/min/1.73 m2/year, p < 0.0001). CONCLUSIONS: Older age, white ethnicity, immunodeficiency and co-administration of ddI and PI were risk factors for tubulopathy in patients who received TDF-containing antiretroviral therapy. The presence of rapid eGFR decline identified TDF recipients at increased risk of tubulopathy
2,4-dichlorophenoxyacetic acid as an alternative auxin for rooting of vine rootstock cuttings
The parent?infant dyad and the construction of the subjective self
Developmental psychology and psychopathology has in the past been more concerned with the quality of self-representation than with the development of the subjective agency which underpins our experience of feeling, thought and action, a key function of mentalisation. This review begins by contrasting a Cartesian view of pre-wired introspective subjectivity with a constructionist model based on the assumption of an innate contingency detector which orients the infant towards aspects of the social world that react congruently and in a specifically cued informative manner that expresses and facilitates the assimilation of cultural knowledge. Research on the neural mechanisms associated with mentalisation and social influences on its development are reviewed. It is suggested that the infant focuses on the attachment figure as a source of reliable information about the world. The construction of the sense of a subjective self is then an aspect of acquiring knowledge about the world through the caregiver's pedagogical communicative displays which in this context focuses on the child's thoughts and feelings. We argue that a number of possible mechanisms, including complementary activation of attachment and mentalisation, the disruptive effect of maltreatment on parent-child communication, the biobehavioural overlap of cues for learning and cues for attachment, may have a role in ensuring that the quality of relationship with the caregiver influences the development of the child's experience of thoughts and feelings
Mechanical Behavior and Microstructural Development of Low-Carbon Steel and Microcomposite Steel Reinforcement Bars Deformed under Quasi-Static and Dynamic Shear Loading
Reinforcement bars of microcomposite (MC) steel, composed of lath martensite and minor amounts of retained austenite, possess improved strength and corrosion characteristics over low-carbon (LC) steel rebar; however, their performance under shear loading has not previously been investigated at the microstructural level. In this study, LC and MC steel cylinders were compression tested, and specimens machined into a forced-shear geometry were subjected to quasi-static and dynamic shear loading to determine their shear behavior as a function of the strain and strain rate. The as-received and sheared microstructures were examined using optical microscopy (OM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). Higher-resolution microstructural examinations were performed using transmission electron microscopy (TEM). The influence of the starting microstructure on the shear behavior was found to depend strongly on the strain rate; the MC steel exhibited not only greater strain-rate sensitivity than the LC steel but also a greater resistance to shear localization with load. In both steels, despite differences in the starting microstructure, post-mortem observations were consistent with a continuous mechanism operating within adiabatic shear bands (ASBs), in which subgrains rotated into highly misoriented grains containing a high density of dislocations
Acidentes de motocicleta no municÃpio de São Paulo, SP (Brasil): 1. caracterização do acidente e da vÃtima
Prompt K_short production in pp collisions at sqrt(s)=0.9 TeV
The production of K_short mesons in pp collisions at a centre-of-mass energy
of 0.9 TeV is studied with the LHCb detector at the Large Hadron Collider. The
luminosity of the analysed sample is determined using a novel technique,
involving measurements of the beam currents, sizes and positions, and is found
to be 6.8 +/- 1.0 microbarn^-1. The differential prompt K_short production
cross-section is measured as a function of the K_short transverse momentum and
rapidity in the region 0 < pT < 1.6 GeV/c and 2.5 < y < 4.0. The data are found
to be in reasonable agreement with previous measurements and generator
expectations.Comment: 6+18 pages, 6 figures, updated author lis
- …