Large-volume metrology instrument selection and measurability analysis

A wide range of metrology processes are involved in the manufacture of large products. In addition to the traditional tool-setting and product-verification operations, increasingly flexible metrology-enabled automation is also being used. Faced with many possible measurement problems and a very large number of metrology instruments employing diverse technologies, the selection of the appropriate instrument for a given task can be highly complex. Also, as metrology has become a key manufacturing process, it should be considered in the early stages of design, and there is currently very little research to support this. This paper provides an overview of the important selection criteria for typical measurement processes and presents some novel selection strategies. Metrics that can be used to assess measurability are also discussed. A prototype instrument selection and measurability analysis application is also presented, with discussion of how this can be used as the basis for development of a more sophisticated measurement planning tool. © 2010 Authors

Evaluation of tactual displays for flight control

Manual tracking experiments were conducted to determine the suitability of tactual displays for presenting flight-control information in multitask situations. Although tracking error scores are considerably greater than scores obtained with a continuous visual display, preliminary results indicate that inter-task interference effects are substantially less with the tactual display in situations that impose high visual scanning workloads. The single-task performance degradation found with the tactual display appears to be a result of the coding scheme rather than the use of the tactual sensory mode per se. Analysis with the state-variable pilot/vehicle model shows that reliable predictions of tracking errors can be obtained for wide-band tracking systems once the pilot-related model parameters have been adjusted to reflect the pilot-display interaction

Euclidean Structure from N>=2 Parallel Circles: Theory and Algorithms

International audienceOur problem is that of recovering, in one view, the 2D Euclidean structure, induced by the projections of N parallel circles. This structure is a prerequisite for camera calibration and pose computation. Until now, no general method has been described for N > 2. The main contribution of this work is to state the problem in terms of a system of linear equations to solve.We give a closed-form solution as well as bundle adjustment-like refinements, increasing the technical applicability and numerical stability. Our theoretical approach generalizes and extends all those described in existing works for N = 2 in several respects, as we can treat simultaneously pairs of orthogonal lines and pairs of circles within a unified framework. The proposed algorithm may be easily implemented, using well-known numerical algorithms. Its performance is illustrated by simulations and experiments with real images

Estimation of uncertainty in three-dimensional coordinate measurement by comparison with calibrated points

This paper details a method of estimating the uncertainty of dimensional measurement for a three-dimensional coordinate measurement machine. An experimental procedure was developed to compare three-dimensional coordinate measurements with calibrated reference points. The reference standard used to calibrate these reference points was a fringe counting interferometer with a multilateration-like technique employed to establish three-dimensional coordinates. This is an extension of the established technique of comparing measured lengths with calibrated lengths. Specifically a distributed coordinate measurement device was tested which consisted of a network of Rotary-Laser Automatic Theodolites (R-LATs), this system is known commercially as indoor GPS (iGPS). The method was found to be practical and was used to estimate that the uncertainty of measurement for the basic iGPS system is approximately 1 mm at a 95% confidence level throughout a measurement volume of approximately 10 m × 10 m × 1.5 m. © 2010 IOP Publishing Ltd

HNF1A G319S variant, active cigarette smoking and incident type 2 diabetes in Aboriginal Canadians: a population-based epidemiological study

<p>Abstract</p> <p>Background</p> <p>In a recent report of large-scale association analysis, a type 2 diabetes susceptibility locus near <it>HNF1A </it>was identified in predominantly European descent populations. A population-specific G319S polymorphism in <it>HNF1A </it>was previously identified in Aboriginal Canadians who have a high prevalence of type 2 diabetes. We aimed to investigate the association of the <it>HNF1A </it>G319S polymorphism with incident type 2 diabetes and to assess whether clinical risk variables for type 2 diabetes influence the association in an Aboriginal population.</p> <p>Methods</p> <p>Of 606 participants who were free of diabetes at baseline in 1993-1995, 540 (89.1%) participated in 10-year follow-up assessments in 2003-2005. Fasting glucose and a 75-g oral glucose tolerance test were obtained to determine incident type 2 diabetes. Participants were genotyped for the <it>HNF1A </it>G319S polymorphism. Interviewers administered questionnaires on smoking behavior.</p> <p>Results</p> <p>The incidence rates of type 2 diabetes were 14.2% (55/388) in major allele homozygotes and 31.2% (29/93) in minor allele carriers (p < 0.001). The <it>HNF1A </it>G319S carrier status was associated with incident type 2 diabetes (odds ratio [OR] 3.78 [95% CI 2.13-6.69]) after adjustment for age, sex, hypertension, triglyceride, HDL cholesterol, and waist circumference. A statistical interaction was observed between <it>HNF1A </it>G319S and baseline active cigarette smoking on the development of type 2 diabetes with similar adjustment (p = 0.006). When participants were stratified by baseline smoking status, <it>HNF1A </it>G319S carriers who were active smokers had increased risk of developing diabetes (OR 6.91 [95% CI 3.38-14.12]), while the association was attenuated to non-significance among non-smokers (1.11 [0.40-3.08]).</p> <p>Conclusions</p> <p>The <it>HNF1A </it>G319S variant is associated with incident type 2 diabetes in Aboriginal Canadians. Furthermore, cigarette smoking appears to amplify incident diabetes risk in carriers of <it>HNF1A </it>G319S.</p

Prognostic value of cortically induced motor evoked activity by TMS in chronic stroke: caveats from a very revealing single clinical case

Background: We report the case of a chronic stroke patient (62 months after injury) showing total absence of motor activity evoked by transcranial magnetic stimulation (TMS) of spared regions of the left motor cortex, but near-to-complete recovery of motor abilities in the affected hand. Case presentation: Multimodal investigations included detailed TMS based motor mapping, motor evoked potentials (MEP), and Cortical Silent period (CSP) as well as functional magnetic resonance imaging (fMRI) of motor activity, MRI based lesion analysis and Diffusion Tensor Imaging (DTI) Tractography of corticospinal tract (CST). Anatomical analysis revealed a left hemisphere subinsular lesion interrupting the descending left CST at the level of the internal capsule. The absence of MEPs after intense TMS pulses to the ipsilesional M1, and the reversible suppression of ongoing electromyographic (EMG) activity (indexed by CSP) demonstrate a weak modulation of subcortical systems by the ipsilesional left frontal cortex, but an inability to induce efficient descending volleys from those cortical locations to right hand and forearm muscles. Functional MRI recordings under grasping and finger tapping patterns involving the affected hand showed slight signs of subcortical recruitment, as compared to the unaffected hand and hemisphere, as well as the expected cortical activations. Conclusions: The potential sources of motor voluntary activity for the affected hand in absence of MEPs are discussed. We conclude that multimodal analysis may contribute to a more accurate prognosis of stroke patients