156 research outputs found
Introduction to carbon dioxide sequestration–based cementitious construction materials
This chapter briefly reviews important issues that justify the importance of carbon dioxide sequestration. It includes carbon dioxide emissions and projections, global warming consequences namely extreme weather events, ocean acidification, sea level rise, economic losses, the increase of vector-borne illnesses, or even the revival of long dormant deadly bacteria and viruses. Comments about the Conference of parties are made with a special attention for the China situation. Comments are also made about the shortcomings of market-based instruments to try to reduce carbon dioxide emissions. A book outline is also included.(undefined)info:eu-repo/semantics/publishedVersio
Non-CO2 generating energy shares in the world : cross-country differences and polarization.
The aim of this paper is to examine the spatial distribution of non-CO2 generating energy sources in the world for the period 1990–2009, paying special attention to the evolution of cross-country disparities. To this end, after carrying out a classical convergence analysis, a more thorough investigation of the entire distribution is presented by examining its external shape, the intra-distribution dynamics and the long-run equilibrium distribution. This analysis reveals the existence of a weak, rather insignificant, convergence process and that large crosscountry differences are likely to persist in the long-run. Next, as polarization indicators are a proper way of appraising potential conflict in international environmental negotiations, we test whether, or not, the distribution dynamics concurs with the presence of polarization. Our results indicate that two poles can be clearly differentiated, one with high and other with low non-CO2 generating energy shares. In view of these findings, and to ensure a fair transition to a sustainable energy system, the paper calls for the development of an ambitious clean energy agenda, especially in countries with low non-CO2 generating energy shares
Multicomponent polysaccharide alginate-based bioinks
3D-Bioprinting has seen a rapid expansion in the last few years, with an increasing number of reported bioinks. Alginate is a natural biopolymer that forms hydrogels by ionic cross-linking with calcium ions. Due to its biocompatibility and ease of gelation, it is an ideal ingredient for bioinks. This review focuses on recent advances on bioink formulations based on the combination of alginate with other polysaccharides. In particular, the molecular weight of the alginate and its loading level has an impact on materials performance, as well as the loading of the divalent metal salt and its solubility, which affects the cross-linking of the gel. Alginate is often combined with other polysaccharides that can sigificantly modify the properties of the gel, and can optimise alginate for use in different biological applications. It is also possible to combine alginate with sacrificial polymers, which can temporarily reinforce the 3D printed construct, but then be removed at a later stage. Other additives can be formulated into the gels to enhance performance, including nanomaterials that tune rheological properties, peptides to encourage cell adhesion, or growth factors to direct stem cell differentiation. The ease of formulating multiple components into alginate gels gives them considerable potential for further development. In summary, this review will facilitate the identification of different alginate-polysaccharide bioink formulations and their optimal applications, and help inform the design of second generation bioinks, allowing this relatively simple gel system to achieve more sophisticated control over biological processes
Post-harvest management and associated food losses and by-products of cassava in southern Ethiopia
Improved (high yield and disease resistant) cassava varieties were introduced into Ethiopia around the onset of the twenty-first century, as a potential food security crop. At present, limited information is available from the country on post-production aspects of the value chain (VC) and related food losses. The lack of such data prevents policymakers and VC actors from taking steps towards improving VC efficiencies, which can have a significant impact on livelihoods and food security. The focus of this study was to examine the prevailing post-harvest practices in the cassava VC in southern Ethiopia and quantify the extent of food losses and associated by-products in the framework of the recently developed ‘food loss and waste protocol’. The majority of the cassava in the study area was processed into dry chips and milled into a composite flour with teff and maize to prepare the staple bread (injera). ‘Critical loss points’ were during sun-drying (4%) and stockpiling at farm and marketplace (30–50%). Insect pest damage was primarily responsible for food losses at farm and market level. The most important insect species infesting dry cassava were identified during the survey. As far as the by-products were concerned, the ratio of leaf:wood (stem and stump):starchy root on a dry matter basis at harvest was 1:6:10. Further emphasis should be on improving processing and storage technologies to reduce food losses and the better recovery and utilisation of by-products, especially the leaves of cassava, which could be a potential source of protein in human diets
Electrohydrodynamic Jet 3D Printed Nerve Guide Conduits (NGCs) for Peripheral Nerve Injury Repair
The prevalence of peripheral nerve injuries resulting in loss of motor function, sensory function, or both, is on the rise. Artificial Nerve Guide Conduits (NGCs) are considered an effective alternative treatment for autologous nerve grafts, which is the current gold-standard for treating peripheral nerve injuries. In this study, Polycaprolactone-based three-dimensional porous NGCs are fabricated using Electrohydrodynamic jet 3D printing (EHD-jetting) for the first time. The main advantage of this technique is that all the scaffold properties, namely fibre diameter, pore size, porosity, and fibre alignment, can be controlled by tuning the process parameters. In addition, EHD-jetting has the advantages of customizability, repeatability, and scalability. Scaffolds with five different pore sizes (125 to 550 μm) and porosities (65 to 88%) are fabricated and the effect of pore size on the mechanical properties is evaluated. In vitro degradation studies are carried out to investigate the degradation profile of the scaffolds and determine the influence of pore size on the degradation rate and mechanical properties at various degradation time points. Scaffolds with a pore size of 125 ± 15 μm meet the requirements of an optimal NGC structure with a porosity greater than 60%, mechanical properties closer to those of the native peripheral nerves, and an optimal degradation rate matching the nerve regeneration rate post-injury. The in vitro neural differentiation studies also corroborate the same results. Cell proliferation was highest in the scaffolds with a pore size of 125 ± 15 μm assessed by the PrestoBlue assay. The Reverse Transcription-Polymerase Chain Reaction (RT-PCR) results involving the three most important genes concerning neural differentiation, namely β3-tubulin, NF-H, and GAP-43, confirm that the scaffolds with a pore size of 125 ± 15 μm have the highest gene expression of all the other pore sizes and also outperform the electrospun Polycaprolactone (PCL) scaffold. The immunocytochemistry results, expressing the two important nerve proteins β3-tubulin and NF200, showed directional alignment of the neurite growth along the fibre direction in EHD-jet 3D printed scaffolds
Design of Three-Dimensional Scaffolds with Tunable Matrix Stiffness for Directing Stem Cell Lineage Specification: An In Silico Study
Tissue engineering is a multi-disciplinary area of research bringing together the fields of engineering and life sciences with the aim of fabricating tissue constructs aiding in the regeneration of damaged tissues and organs. Scaffolds play a key role in tissue engineering, acting as the templates for tissue regeneration and guiding the growth of new tissue. The use of stem cells in tissue engineering and regenerative medicine becomes indispensable, especially for applications involving successful long-term restoration of continuously self-renewing tissues, such as skin. The differentiation of stem cells is controlled by a number of cues, of which the nature of the substrate and its innate stiffness plays a vital role in stem cell fate determination. By tuning the substrate stiffness, the differentiation of stem cells can be directed to the desired lineage. Many studies on the effect of substrate stiffness on stem cell differentiation has been reported, but most of those studies are conducted with two-dimensional (2D) substrates. However, the native in vivo tissue microenvironment is three-dimensional (3D) and life science researchers are moving towards 3D cell cultures. Porous 3D scaffolds are widely used by the researchers for 3D cell culture and the properties of such scaffolds affects the cell attachment, proliferation, and differentiation. To this end, the design of porous scaffolds directly influences the stem cell fate determination. There exists a need to have 3D scaffolds with tunable stiffness for directing the differentiation of stem cells into the desired lineage. Given the limited number of biomaterials with all the desired properties, the design of the scaffolds themselves could be used to tune the matrix stiffness. This paper is an in silico study, investigating the effect of various scaffold parameter, namely fiber width, porosity, number of unit cells per layer, number of layers, and material selection, on the matrix stiffness, thereby offering a guideline for design of porous tissue engineering scaffolds with tunable matrix stiffness for directing stem cell lineage specification
ELECTROHYDRODYNAMIC-JET 3D PRINTED CONDUCTIVE POROUS SCAFFOLDS FOR NEURONAL TISSUE REGENERATION
Ph.DDOCTOR OF PHILOSOPHY (FOE
3D printing and 3D bioprinting in pediatrics
10.3390/bioengineering4030063Bioengineering436
- …